One Chain w/Two Sets of Chainrings?
06-06-14 | 06:11 AM
#1
Thread Starter
Senior Member
Joined: Aug 2012
Posts: 2,828
Likes: 2
From: West Georgia
Bikes: K2 Mod 5.0 Roadie, Fuji Commuter
One Chain w/Two Sets of Chainrings?
I have two sets of chainrings that I would like to use on the same cassette utilizing the same chain. One most of the time, the other on occasion---provided it will work.
The main set is 52/38 with a total capacity of 32, the secondary set is a 56/44 that ends up needing 30. (Cassette is 12-30)
The RD is a 105 short cage (RD-5700) that Shimano shows "33 or less" for a total capacity. Will it handle both gearsets with one chain? I usually use big chainring to big sprocket + 2 links to fit a chain (per Shimano tech docs), should I fit the chain with the 56t or 52t ring? Or, measure for each and split difference?
Or, should I use one chain for each?
Thanks, Greg.
The main set is 52/38 with a total capacity of 32, the secondary set is a 56/44 that ends up needing 30. (Cassette is 12-30)
The RD is a 105 short cage (RD-5700) that Shimano shows "33 or less" for a total capacity. Will it handle both gearsets with one chain? I usually use big chainring to big sprocket + 2 links to fit a chain (per Shimano tech docs), should I fit the chain with the 56t or 52t ring? Or, measure for each and split difference?
Or, should I use one chain for each?
Thanks, Greg.
06-06-14 | 06:20 AM
#2
Senior Member
Joined: Feb 2004
Posts: 30,225
Likes: 649
From: St Peters, Missouri
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Here's the problem: Your main chain is almost surely going to be too short to cover the big/big combination. If you ever accidentally shift into that combination (or even the next couple biggest rear cogs), it can cause a TON of damage to your bike in less time than it took me to type this sentence.
If you size the chain to fit the 56 chainring it will probably be too long when using the 52 chainring. If it was my bike I'd switch chains when I switched chainrings.
If you size the chain to fit the 56 chainring it will probably be too long when using the 52 chainring. If it was my bike I'd switch chains when I switched chainrings.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
06-06-14 | 06:22 AM
#3
Senior Member
Joined: Apr 2009
Posts: 39,897
Likes: 3,865
From: New Rochelle, NY
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
If the chain is measured for the 56 it will probably be OK for the smaller crankset. The issue may be chain take up riding small/small with the 38 but that's easy enough to find out.
Keeping chains matched to the cassette is more important than to the rings,so from a wear standpoint staying with the same chain makes sense. OTOH if you ride both combinations roughly equally, having two chains that you rotate will keep them both matched for wear. Rotating chains is SOP for many high mileage riders, so you'd be in good company doing so.
Keeping chains matched to the cassette is more important than to the rings,so from a wear standpoint staying with the same chain makes sense. OTOH if you ride both combinations roughly equally, having two chains that you rotate will keep them both matched for wear. Rotating chains is SOP for many high mileage riders, so you'd be in good company doing so.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
06-06-14 | 09:32 AM
#5
Thread Starter
Senior Member
Joined: Aug 2012
Posts: 2,828
Likes: 2
From: West Georgia
Bikes: K2 Mod 5.0 Roadie, Fuji Commuter
06-06-14 | 10:14 AM
#6
Nigel
Joined: Mar 2011
Posts: 2,991
Likes: 7
From: San Jose, CA
Bikes: 1980s and 1990s steel: CyclePro, Nishiki, Schwinn, SR, Trek........
I see the biggest potential issue is the ability of the short cage RD to handle the chain wrap - what you want to do is trivial for a long cage RD.
Thread
Thread Starter
Forum
Replies
Last Post
tomecki
Bicycle Mechanics
10
08-31-12 03:01 AM
