Broken Bike Lever
#1
Junior Member
Thread Starter
Join Date: Jan 2014
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Broken Bike Lever
Hi,
I recently got a bike Transeo GT 2.0 and it has couple of problems. One is a broken brake lever and the other is bent front rim.
I am not sure where to get these parts. I contacted GT Bicycles for this and waiting for their response.
Also wondering whether i can change the brake lever my self.
For the bent wheel i am planning to use my bike trainer and spoke wrench to fix it.
Also i need a new saddlepost and seat. I am not sure what the seat post measurements are.
Thanks
mars
I recently got a bike Transeo GT 2.0 and it has couple of problems. One is a broken brake lever and the other is bent front rim.
I am not sure where to get these parts. I contacted GT Bicycles for this and waiting for their response.
Also wondering whether i can change the brake lever my self.
For the bent wheel i am planning to use my bike trainer and spoke wrench to fix it.
Also i need a new saddlepost and seat. I am not sure what the seat post measurements are.
Thanks
mars
#2
Senior Member
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702
Bikes: old clunker
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 105 Times
in
83 Posts
You have to actually look at the lever assembly that you have in order to know the make and model.
You have to actually measure the seat tube to know what fits.
You have to actually measure the seat tube to know what fits.
Last edited by AnkleWork; 07-21-14 at 09:40 PM.
#4
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 292 Times
in
215 Posts
also
the seatpost clamp seems to have been overtightened
and bent in the top of the frame
probably to try to compensate for a too small post
is there any possibility this bike might be stolen?
the seatpost clamp seems to have been overtightened
and bent in the top of the frame
probably to try to compensate for a too small post
is there any possibility this bike might be stolen?
#5
Banned
Any Bike shops around?
The company that makes the frames painted with the GT logo buys those parts, they dont make them .
so you probably need some one to look at the bike to tell you what Brakes .. Brand and model, are on there .
then you may have to buy a whole new Brake .. lever and caliper . since its hydraulic
as there may not be a separate spare lever for it.
The company that makes the frames painted with the GT logo buys those parts, they dont make them .
so you probably need some one to look at the bike to tell you what Brakes .. Brand and model, are on there .
then you may have to buy a whole new Brake .. lever and caliper . since its hydraulic
as there may not be a separate spare lever for it.
#6
Junior Member
Thread Starter
Join Date: Jan 2014
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks a lot for the info guys.
I don't know whether the bike is stolen or not. It was left at the donation dumpster and i picked it up.
I am trying to restore it.
thanks.
I don't know whether the bike is stolen or not. It was left at the donation dumpster and i picked it up.
I am trying to restore it.
thanks.
Last edited by mars76; 07-22-14 at 08:42 AM.
#7
Really Old Senior Member
Does this look like the lever?
TEKTRO USA
Check this link to see if you can nail down the correct year-
2008 GT Transeo 2.0 Disc - BikePedia
TEKTRO USA
Check this link to see if you can nail down the correct year-
2008 GT Transeo 2.0 Disc - BikePedia
#8
Junior Member
Thread Starter
Join Date: Jan 2014
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks a lot for the link.
I think the front brake system is TEKTRO Draco Hydraulic.
TEKTRO USA
How hard it will be to replace the brake lever ? Is it as simple as taking the grip,shifter and replacing the lever ?
Do i need to bleed the brakes when i replace the lever?
Thanks
mars
I think the front brake system is TEKTRO Draco Hydraulic.
TEKTRO USA
How hard it will be to replace the brake lever ? Is it as simple as taking the grip,shifter and replacing the lever ?
Do i need to bleed the brakes when i replace the lever?
Thanks
mars