Need help building a flatland bike
08-28-04 | 09:15 PM
#1
Thread Starter
Newbie
Joined: Aug 2004
Posts: 3
Likes: 0
Need help building a flatland bike
Well I am building a flatland bike from scratch and I don't know much at all about flatland bikes or parts. I want to know what the best parts are for my budget. I am a begginer. And for a frame how much do ya'll think I am going to have to spend?
ANY help would be AWESOME!
ANY help would be AWESOME!
08-28-04 | 09:38 PM
#2
Gimpy
Joined: Jul 2004
Posts: 171
Likes: 0
From: On my bike.
Bikes: Haro Backtrail three frame with oddysee hazard lite cassette, dk 4-peice bars, crappy fsa nastyboy cranks, tank headset, sun ringle pedals, profile sprocket, mosh stem, ODI rouge grips, Primo wall tires, Diamond back fork and a few mosh parts
You might want to start with a complete bike and go from there. Always check and www.flatlandfuel.com. Probably starting with flatland fuel. Ask BMXTRIX. He will give you lots of info. He says the DK Signal is a really good beginner flatland bike. He is around here some where.
08-28-04 | 10:49 PM
#3
Senior Member
Joined: Jul 2004
Posts: 1,102
Likes: 0
A really good flatland bike will run you no less than about $1,000.00 or so if you are building it from scratch.
A really good ENTRY level bike will run you $280.00 and is the DK Signal. I would recommend this bike to all newbies in the world of flatland.
Read the other posts that are already here as there is a ton of info on this bike already and some info on a killer complete flatland specific bike.
A really good ENTRY level bike will run you $280.00 and is the DK Signal. I would recommend this bike to all newbies in the world of flatland.
Read the other posts that are already here as there is a ton of info on this bike already and some info on a killer complete flatland specific bike.
