Steve Bauer sirocco
#1
Thread Starter
Junior Member
Joined: Jun 2021
Posts: 12
Likes: 0
Steve Bauer sirocco
I can’t find anything posted recently regarding the value of this bike… I also can’t seem to post pics here because I’m new.
it has white handlebar tape, the frame and forks are red. 80s vintage. 12 speed.
Without much more info, any ideas of the value? Thanks!
It’s in fairly good overall condition, aside from the tires needing replacement
it has white handlebar tape, the frame and forks are red. 80s vintage. 12 speed.
Without much more info, any ideas of the value? Thanks!
It’s in fairly good overall condition, aside from the tires needing replacement
Last edited by 1fthwlvs; 06-16-21 at 06:19 AM. Reason: Condition
#2
If you have photos of it, you can post them to your album and then others may be able to post them here for you. Our you could do your maximum 5 posts a day over 2 days telling us about your bike and then post them yourself.
#4
Thread Starter
Junior Member
Joined: Jun 2021
Posts: 12
Likes: 0
I won’t have access to the bike until Friday, so no more details till then. I’ve also got a Raleigh Grand Prix and super record - both in about the same condition as the Steve Bauer, and I’d guess a similar vintage
I don’t know anything about the Raleighs either
I don’t know anything about the Raleighs either
#6
Senior Member

Joined: Nov 2004
Posts: 23,212
Likes: 3,122
Based on the livery, the Bauer is circa 1986-1987. I'm surprised it has Schraeder valves, which generally indicates 27" wheels. Also, the rear axle is nutted. The brakes and derailleurs appear to be Shimano entry level units, either LIght Action or Z-series. Most important unknown affecting the value is the tubeset. Given the components and era it could be anything from hi-tensile steel to a seamed double butted CrMo main triangle. Most Bauer from this era are manufactured by Maruishi.
#8
Senior Member

Joined: Nov 2004
Posts: 23,212
Likes: 3,122
Not without more information. Besides the bicycle itself, location is a big factor. Metropolitan areas like the GTA are a LOT more expensive than backwaters like Dog River. Please post more pictures, specifically close-ups of the major components.
#9
Full Member


Joined: Nov 2010
Posts: 263
Likes: 59
From: Olympia, WA
Bikes: Constant rotation, Currently: 2009 Felt FC, 1999 Stumpjumper, Serotta KOM, Eisentraut Rainbowtraut, Trek 400 commuter
I'll toss a value out, given the little info and pics. Plus a few assumptions on my end.
As it sits, I'd probably spend less than 100 on it. Here's why, I can tell for sure that it's going to need tires, possibly tube repair, new handlebar tape, brake pads, cables, etc. and that's just to get it back to presentable riding shape. If I get there and the seatpost won't move, the stem won't move, the frame has damage (I don't suspect it, because though the pictures aren't great, the paint looks pretty good, but the rear wheel isn't installed fully which could mean there was an issue there, though likely just a storage thing.), or there are major issues with the components (broken derailleur, broken spokes, missing bolts), then I'd start subtracting off of 100 and possibly get to a point where I'm not interested.
I also like working on bikes like this and getting them back into shape and on the road for someone to enjoy, so factor that into the equation too, if you don't like doing this work, you'll should spend much less.
Once it's in good riding condition and the replacements/repairs are complete, I'd throw out 175-250 as a price range in my area, and that is assuming that the paint is in as good of shape as I think, if it is super scratched or rusty in spots, then subtract 50. People love to look good when they ride. 250 would mean great condition and that the frame is lighter steel as T-Mar said,
This bike is also pretty large, which could help because there's fewer out there, but there's also fewer riders. I like to sell things quicker, so keep in mind that is where my pricing comes from. I'd also likely drop the price after a week or two if there's little interest just to keep the bike moving. Now is the time of year when you shouldn't have an issue selling a bike unless you're asking too much.
As it sits, I'd probably spend less than 100 on it. Here's why, I can tell for sure that it's going to need tires, possibly tube repair, new handlebar tape, brake pads, cables, etc. and that's just to get it back to presentable riding shape. If I get there and the seatpost won't move, the stem won't move, the frame has damage (I don't suspect it, because though the pictures aren't great, the paint looks pretty good, but the rear wheel isn't installed fully which could mean there was an issue there, though likely just a storage thing.), or there are major issues with the components (broken derailleur, broken spokes, missing bolts), then I'd start subtracting off of 100 and possibly get to a point where I'm not interested.
I also like working on bikes like this and getting them back into shape and on the road for someone to enjoy, so factor that into the equation too, if you don't like doing this work, you'll should spend much less.
Once it's in good riding condition and the replacements/repairs are complete, I'd throw out 175-250 as a price range in my area, and that is assuming that the paint is in as good of shape as I think, if it is super scratched or rusty in spots, then subtract 50. People love to look good when they ride. 250 would mean great condition and that the frame is lighter steel as T-Mar said,
This bike is also pretty large, which could help because there's fewer out there, but there's also fewer riders. I like to sell things quicker, so keep in mind that is where my pricing comes from. I'd also likely drop the price after a week or two if there's little interest just to keep the bike moving. Now is the time of year when you shouldn't have an issue selling a bike unless you're asking too much.
__________________
#10
Thread Starter
Junior Member
Joined: Jun 2021
Posts: 12
Likes: 0
Location and pics
The bike is in the London, Ontario area
posted more pics to my album. I still can’t post them here, gotta be getting close though.
also just got my hand on a late 70s supercycle bobcat, an 80s ccm radical, and 80s? Bmx baja… haven’t started looking into values yet on those bikes
posted more pics to my album. I still can’t post them here, gotta be getting close though.
also just got my hand on a late 70s supercycle bobcat, an 80s ccm radical, and 80s? Bmx baja… haven’t started looking into values yet on those bikes
Last edited by 1fthwlvs; 06-18-21 at 04:14 PM.
#12
Senior Member
Joined: Jun 2019
Posts: 166
Likes: 76
From: British Columbia, Canada
Bikes: 1970's Piasentin Super Vitus 971, 1979 Carlton Professional, 2005 Trek 5000, 2011 Niner EMD, 2018 Argon 18 XRoad, 1990 Diamondback Master TG Centurion
That's a very large bike - making it a limited market - and needs new tires, tubes, brake pads, perhaps bar tape and a very good clean and tune-up.
In this condition, I'm thinking $200 to $250 CAD tops. Even in the white-hot Vancouver market, it would struggle to get $250.
In this condition, I'm thinking $200 to $250 CAD tops. Even in the white-hot Vancouver market, it would struggle to get $250.






