Go Back  Bike Forums > Bike Forums > Classic & Vintage > Classic and Vintage Sales
Reload this Page >

Maillard 700 Course “Super” 6-Speed Freewheel- 13x26

Notices
Classic and Vintage Sales Private Sales Only, no online storefronts. All prices must be quoted, we are not an auction site.

Maillard 700 Course “Super” 6-Speed Freewheel- 13x26

Old 05-26-22, 11:59 AM
  #1  
BertoBerg 
Full Member
Thread Starter
 
BertoBerg's Avatar
 
Join Date: Jul 2019
Location: Bainbridge Island, WA
Posts: 236

Bikes: '72 Peugeot PX-10, '85 Trek 720, '78 Masi Gran Crit, '79 Echelon Spectra

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 50 Post(s)
Liked 56 Times in 33 Posts
Maillard 700 Course “Super” 6-Speed Freewheel- 13x26

Hello!

Up for sale is a super clean Maillard 700 Course “Super” 6-speed freewheel. It is a 13x26 (13-15-17-20-23-26). I replaced the 20, 23, and 26t cogs with some NOS parts around 100 miles ago. It has BSA threading.

Thanks!

$60/shipped
_____________








Last edited by BertoBerg; 05-26-22 at 02:55 PM.
BertoBerg is offline  
Old 06-01-22, 09:44 AM
  #2  
BertoBerg 
Full Member
Thread Starter
 
BertoBerg's Avatar
 
Join Date: Jul 2019
Location: Bainbridge Island, WA
Posts: 236

Bikes: '72 Peugeot PX-10, '85 Trek 720, '78 Masi Gran Crit, '79 Echelon Spectra

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 50 Post(s)
Liked 56 Times in 33 Posts
The pictures make the freewheel look more scratched than it actually is. This thing is in great shape!
BertoBerg is offline  
Old 09-01-22, 12:27 PM
  #3  
BertoBerg 
Full Member
Thread Starter
 
BertoBerg's Avatar
 
Join Date: Jul 2019
Location: Bainbridge Island, WA
Posts: 236

Bikes: '72 Peugeot PX-10, '85 Trek 720, '78 Masi Gran Crit, '79 Echelon Spectra

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 50 Post(s)
Liked 56 Times in 33 Posts
Bump!
BertoBerg is offline  
Old 09-01-22, 01:24 PM
  #4  
Chombi1 
Senior Member
 
Chombi1's Avatar
 
Join Date: Nov 2015
Posts: 4,052
Mentioned: 100 Post(s)
Tagged: 0 Thread(s)
Quoted: 1451 Post(s)
Likes: 0
Liked 577 Times in 382 Posts
That rough finish quality seen close up on the Maillard cogs is pretty typical/normal despite it being their top line 700 series FW (Typical French quality back then.). I have many of these FWs and they all look like this.
You only notice the scratches from the factory if you look at the cogs very closely...
They are very good/reliable FWs and never gave me any trouble all the years I had been using them.....unlike a few Reginas I had owned....

Last edited by Chombi1; 09-01-22 at 01:31 PM.
Chombi1 is offline  
Likes For Chombi1:
Old 09-02-22, 10:41 AM
  #5  
kroozer 
vintage motor
 
kroozer's Avatar
 
Join Date: Sep 2008
Location: Tepic, Nayarit, Mexico
Posts: 1,508

Bikes: 48 Automoto, 49 Stallard, 50 Rotrax, 62 Jack Taylor, 67 Atala, 68 Lejeune, 72-74-75 Motobecanes, 73 RIH, 71 Zieleman, 74 Raleigh, 78 Windsor, 83 Messina (Villata), 84 Brazzo (Losa), 85 Davidson, 90 Diamondback, 92 Kestrel

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 119 Post(s)
Likes: 0
Liked 60 Times in 47 Posts
Where do you get removers for these? I have a nice Maillard 13-26 6sp (don't know the model) whose splines will almost fit a standard Shimano remover, but not quite.
kroozer is offline  
Old 09-02-22, 10:47 AM
  #6  
BertoBerg 
Full Member
Thread Starter
 
BertoBerg's Avatar
 
Join Date: Jul 2019
Location: Bainbridge Island, WA
Posts: 236

Bikes: '72 Peugeot PX-10, '85 Trek 720, '78 Masi Gran Crit, '79 Echelon Spectra

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 50 Post(s)
Liked 56 Times in 33 Posts
Originally Posted by kroozer View Post
Where do you get removers for these? I have a nice Maillard 13-26 6sp (don't know the model) whose splines will almost fit a standard Shimano remover, but not quite.
I've had luck with a Park Tool FR-2.
BertoBerg is offline  
Likes For BertoBerg:
Old 09-02-22, 04:05 PM
  #7  
Chombi1 
Senior Member
 
Chombi1's Avatar
 
Join Date: Nov 2015
Posts: 4,052
Mentioned: 100 Post(s)
Tagged: 0 Thread(s)
Quoted: 1451 Post(s)
Likes: 0
Liked 577 Times in 382 Posts
Originally Posted by BertoBerg View Post
I've had luck with a Park Tool FR-2.
Yes, the two notch Park FR-2 is the ticket for these FWs....
The later Maillard/Sachs FWs with splines comes off with the Park FR-1.2 splined remover that also works on Regina FWs.

Last edited by Chombi1; 09-02-22 at 04:08 PM.
Chombi1 is offline  
Old 09-03-22, 06:21 AM
  #8  
pastorbobnlnh 
Freewheel Medic
 
pastorbobnlnh's Avatar
 
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,215

Bikes: Snazzy* Schwinns, Classy Cannondales, Aero Lotus & a Lonely '83 Santana Tandem (* Ed.)

Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1027 Post(s)
Liked 958 Times in 492 Posts
kroozer the "splines" you see are not for removal of the freewheel from the hub. As mentioned above, look closer and you will see the two notches for removal.

The splines you do see are part of the retaining ring/outer bearing race which secures the two body halves of this model together. It takes a special tool, similar to a sealed BB tool, to disassemble for service. Most freewheels have two small holes for a pin spanner or a punch. Maillard tried this for a few years. My guess is they abandoned it because it is a perfect place to attract and accumulate dirt.

This model was eventually replaced by Sachs Aris freewheels. As a side note, the many of the Aris sprockets can fit this body with no or just a little modification.


Over the winter, I worked on several Maillard Helicomatics, and they also sport the same "scratchy" finish.
__________________
Bob
Enjoying the GA coast all year long!

Thanks for visiting my website: www.freewheelspa.com





pastorbobnlnh is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.