Campania “Professional” freebie
02-16-19 | 05:48 PM
#1
Thread Starter
Senior Member
Joined: Sep 2005
Posts: 3,487
Likes: 1,553
From: Oakland, CA
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Campania “Professional” freebie
Picked this up last weekend from a neighbor. Dr. Google tells me this was a Japanese brand that was trying to evoke Italian flair, and this was apparently the top model. It’s nothing special, but it is double butted chromoly, and apparently fully chromed under the paint. Neat little frame with some nice SR Royal components and KKT pedals. I’ll likely clean this up and sell it locally. Just wanted to share...
02-16-19 | 06:25 PM
#3
Senior Member
Joined: Feb 2013
Posts: 15,369
Likes: 4,393
From: Alta California
-----
My recollection of the Campania badge was that it was around for only two or three years about 1973-74. There should be a date code on the backside of the Sakae Ringyo crank arms. Suspect it may have been a contract build done for a distributor but no hard information.
The heart-shaped no-slide pibb on the downtube will identify the maker.
The Professional model was the top-of-the-line and is not oft encountered.
Thanks for posting this find.
[MENTION=20650]T-Mar[/MENTION] is sure to be able to enlighten us all!
-----
My recollection of the Campania badge was that it was around for only two or three years about 1973-74. There should be a date code on the backside of the Sakae Ringyo crank arms. Suspect it may have been a contract build done for a distributor but no hard information.
The heart-shaped no-slide pibb on the downtube will identify the maker.
The Professional model was the top-of-the-line and is not oft encountered.
Thanks for posting this find.
[MENTION=20650]T-Mar[/MENTION] is sure to be able to enlighten us all!
-----
Last edited by juvela; 02-16-19 at 06:27 PM. Reason: punctuation
02-16-19 | 06:52 PM
#5
Thread Starter
Senior Member
Joined: Sep 2005
Posts: 3,487
Likes: 1,553
From: Oakland, CA
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
More cool details from the headset top cup...
Last edited by noobinsf; 03-01-19 at 06:10 PM.
02-16-19 | 07:07 PM
#6
Senior Member
Joined: Aug 2015
Posts: 537
Likes: 624
From: Murrieta Ca.
Bikes: Teledyne Titan, Bob Jackson Audax Club, Bob Jackson World Tour, AlAn Record Ergal, 3Rensho Katana.
The seatpost is very early SR Super Light, as is the crank. Very nice stuff and big bucks on eBay.
: Mike
: Mike
__________________
Booyah Hubba-Hubba!!!
Booyah Hubba-Hubba!!!
02-16-19 | 09:30 PM
#9
multimodal commuter
Joined: Nov 2006
Posts: 19,810
Likes: 597
From: NJ, NYC, LI
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
I don't get the headset top cup. Who was H. McIver of Van Nuys, CA?
02-16-19 | 10:58 PM
#11
Thread Starter
Senior Member
Joined: Sep 2005
Posts: 3,487
Likes: 1,553
From: Oakland, CA
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
02-17-19 | 04:55 AM
#12
Cyclotouriste
Joined: Aug 2009
Posts: 11,792
Likes: 7,015
From: South Holland, NL
Bikes: Yes, please.
Like it! For 'nothing special' it's pretty special ... 
02-17-19 | 06:44 AM
#13
www.theheadbadge.com
Joined: Sep 2005
Posts: 29,025
Likes: 5,537
From: Southern Florida
Bikes: https://www.theheadbadge.com
It's been said before, and it needs to be said again: That seatpost is cool.
So is the crank. But that seatpost MAKES the whole bike.
-Kurt
So is the crank. But that seatpost MAKES the whole bike.
-Kurt
__________________
02-17-19 | 07:21 AM
#14
Senior Member
Joined: Nov 2004
Posts: 23,212
Likes: 3,123
Campania was a USA marketing brand owned by McIver. The frames and components were manufactured in Japan but the bicycles were assembled by McIver in California. The brand survived into at least 1976 This one appears to typical of a higher end, mass produced, Japanese frame. The source may be Kuwahara. The serial number may provide further insight on the exact year and identity of the frame manufacturer. Even if the OP isn't curious, I'd appreciate the serial number for my database. TIA.
02-17-19 | 07:50 AM
#15
feros ferio
Joined: Jul 2000
Posts: 22,411
Likes: 1,876
From: www.ci.encinitas.ca.us
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
This thread brings back memories for me, as well. When I worked at Bikecology in Santa Monica / west Los Angeles in the early 1970s, Campania was one of several smaller marques that appeared at various competitors' shops. Yours looks to be a particularly decent specimen. Having snapped a 1970 Sugino crank, I would caution against putting too much load on those old SRs, although maybe they are OK. (When I compared my 1970 Sugino Mighty Compe set against my 1974 set, I noticed that the latter had about 15 percent more metal around the pedal eye, where mine had snapped at an inopportune moment in the single most dangerous component failure I ever experienced while riding.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
02-17-19 | 08:17 PM
#16
Thread Starter
Senior Member
Joined: Sep 2005
Posts: 3,487
Likes: 1,553
From: Oakland, CA
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Here is what I can find under the bottom bracket shell. It looks like what is stamped is FS4bb0b, and the silver sticker reads F008166.
02-17-19 | 08:21 PM
#17
Thread Starter
Senior Member
Joined: Sep 2005
Posts: 3,487
Likes: 1,553
From: Oakland, CA
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
I wish I could say I were going to do something interesting with it, but I will likely just clean up the frame and sell. I have this waiting for me when I finally have the time:
02-17-19 | 10:26 PM
#18
Ohhhh, a Mercian with "barber pole" seat tube....gotta see THIS! I'm surprised how H. McIver got so many items customized with his name and Van Nuys location, the bike boom was a funny time. I recall seeing this brand sold at some shop in Reseda back in the day but never saw a "professional" model, only a "semi-pro" at best... those had ornate "nevex-y looking lugs" but even then as a very green schoolboy I wasn't fooled into thinking it was actually Italian,
02-18-19 | 05:45 AM
#19
www.theheadbadge.com
Joined: Sep 2005
Posts: 29,025
Likes: 5,537
From: Southern Florida
Bikes: https://www.theheadbadge.com
-Kurt
__________________
02-18-19 | 10:54 AM
#20
Thread Starter
Senior Member
Joined: Sep 2005
Posts: 3,487
Likes: 1,553
From: Oakland, CA
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
It’s an 83. I’ll start a new thread on that one soon, but yes, I’m excited about it.
02-23-19 | 08:44 PM
#21
Thread Starter
Senior Member
Joined: Sep 2005
Posts: 3,487
Likes: 1,553
From: Oakland, CA
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Quick update on the Campania for reference. Here is the stamp on the fork steerer tube, marked “4E,” with what looks like an “O” and a tiny “s”.
02-24-19 | 07:41 PM
#22
Thread Starter
Senior Member
Joined: Sep 2005
Posts: 3,487
Likes: 1,553
From: Oakland, CA
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Foreground is the chainstay after scraping off the old clearcoat, background is before. It’s a huge PIA, but will be worth it, as the paint is in good shape under the grime. Pity that it’s too big, or I’d be tempted to keep it...
03-01-19 | 03:00 AM
#23
Thread Starter
Senior Member
Joined: Sep 2005
Posts: 3,487
Likes: 1,553
From: Oakland, CA
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Here it is, cleaned up and done. I’ll try to get some outdoor shots to highlight the paint and chrome, which are in good shape.
03-01-19 | 06:10 AM
#24
Senior Member
Joined: Nov 2004
Posts: 23,212
Likes: 3,123
I don't know the identity of the manufacturer but the format is consistent with the Japanese source used by Bianchi in the 1980s. The frame itself is from June 1974 while the fork is a standard, off the shelf, Ishiwata product from May 1974. Given that the fork is Ishiwata, the frame tubing is likely Ishiwata too. Consequently, we may be able to determine the tubeset from the inner diameter of the seat tube or the diameter of a proper fitting seat post.
03-01-19 | 07:35 AM
#25
Senior Member
Joined: Jan 2015
Posts: 330
Likes: 27
From: Arnold Maryland
Bikes: Cervelo S5, Cannondale AL1 Lefty MTB, Trek X01, Trek Farley 7,1951 Raleigh Sport, 57&60 Raleigh Tourist, 70 Raleigh Super Course, 80's Soma Prestiege,72 Raleigh Grand Sports, 85 Club Fuji, 76 Raleigh Competition, 85 Panasonic,70's Peugot u08. & more
Well that cleaned up very nicely! She will be a sweet looking ride.