Rim width question
#26
dddd, thanks for the inputs. Some very valuable information.
I have to winder ho many people who indicate above that 1¼ inch tires on 14mm gap width rims are ok actually measured the tire width. Notably, an old set of IRC "Road Winner Duro II" 27x1¼ tires that I have on another bike actually measure 27.9mm (1.1 inch) wide at max inflation on 18-19 mm (70's steel Ukairim) rims. I also wonder how many who mention that they have been running the referenced combination are at or near max inflation pressure.
I have to winder ho many people who indicate above that 1¼ inch tires on 14mm gap width rims are ok actually measured the tire width. Notably, an old set of IRC "Road Winner Duro II" 27x1¼ tires that I have on another bike actually measure 27.9mm (1.1 inch) wide at max inflation on 18-19 mm (70's steel Ukairim) rims. I also wonder how many who mention that they have been running the referenced combination are at or near max inflation pressure.
Your tire blew off because it was a crap tire with bad dimensions, not because of 2mm per side of rim width.
#27
Thread Starter
Newbie
Joined: Jul 2024
Posts: 34
Likes: 17
One may be able to run wide mountain bike tires on 14mm rims, but I have to wonder: at what pressure?
Also: "...millions of people..."?
My point was that if one runs the tire at max pressure, wider tires on these rims for road use may be an issue.
I do not dispute that the tires I first tried were junk.
Also: "...millions of people..."?
My point was that if one runs the tire at max pressure, wider tires on these rims for road use may be an issue.
I do not dispute that the tires I first tried were junk.
#28
One may be able to run wide mountain bike tires on 14mm rims, but I have to wonder: at what pressure?
Also: "...millions of people..."?
My point was that if one runs the tire at max pressure, wider tires on these rims for road use may be an issue.
I do not dispute that the tires I first tried were junk.
Also: "...millions of people..."?
My point was that if one runs the tire at max pressure, wider tires on these rims for road use may be an issue.
I do not dispute that the tires I first tried were junk.
You have a very narrow set of experiences and reference points, and it has led you astray. There is no rim width conspiracy. All those rim width charts popped up just in the last 10 or 15 years - about the time recommended pressure charts finally got everyone riding pressures that match their weight, and the introduction of the A23 rim. Before that it wasn't a discussion with quality rims. Narrow rims were lighter than wider rims, so if you wanted lighter that's what you used.
What's even more disturbing, the rim width recommendations are becoming wider and wider. When the A23 was introduced, it's 18mm inner width was considered radical for 23mm tires because it made their shape essentially not round. But now we have websites saying that 19mm is the minimum width for 23mm tires? Ridiculous.
https://sugarwheelworks.com/blog/how...and-tire-size/
There is a lot of BS in cycling. Any hint of "science" and everyone comes out of the woodwork to promote it. Everyone not riding long cranks was an idiot, now everyone is promoting super short cranks. It gets tiresome after you've lived through enough oval chainring trends to realize that most of the stuff people get stuck on amount to nothing.
#29
Full Member
Joined: Feb 2024
Posts: 395
Likes: 231
From: Folsom,Ca
Bikes: n+1
One may be able to run wide mountain bike tires on 14mm rims, but I have to wonder: at what pressure?
Also: "...millions of people..."?
My point was that if one runs the tire at max pressure, wider tires on these rims for road use may be an issue.
I do not dispute that the tires I first tried were junk.
Also: "...millions of people..."?
My point was that if one runs the tire at max pressure, wider tires on these rims for road use may be an issue.
I do not dispute that the tires I first tried were junk.
Max pressure can work well on the road if you need it, and don't mind the "firm" ride feel. a 1.5 or 1.9 at max pressure is still more comfy then a 23 at whatever pressure you run it at, and near max you have enough support for the tire to not squirm on a curvy, fast road descent.
I found on a 1.5in tire I needed 60+psi(max 85) to not get tire squirm as a 210lb rider. On the front. On other tires with thicker carcasses(heavier, slower rolling) or wider size you can run less pressure.








