handlebar cleanup?
06-09-07 | 08:21 PM
#1
Thread Starter
Senior Member
Joined: Apr 2005
Posts: 17,196
Likes: 761
From: Ann Arbor, MI
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
handlebar cleanup?
I just got a used Nitto 42 cm bar that needs a serious cleanup and polish before I install it. What do you recommend to remove ancient handlebar tape glue, and to polish up the central section?
Road Fan
Road Fan
06-09-07 | 08:55 PM
#2
Acetone or lacquer thinner should make quick work of it. Actually unless you're running into problems getting the brake lever clamps on, then you could just clean and polish the center? For polishing the center, any decent aluminum polish will shine them close to chrome. For an added shine, hit the bars with some ultra fine sandpaper, like 1500 grit. The polish will take out the scratches, and it will remove oxidation and smooth the surface before polishing. Some bars have that sleeved style center, I usually just clean those the best I can, and leave it alone. No real way to duplicate that type of finish.,,,,BD
__________________
So many bikes, so little dime.
So many bikes, so little dime.
Last edited by Bikedued; 06-09-07 at 09:28 PM.
