Dylansbob 

Have: 54cm Schwinn SuperSport frame/fork, pink of course. Fairly clean, some paint chips.

ISO: 7 or 8 spd STI or 8 spd ergo levers

brian3069

I have a orphaned Exage Action areo brake lever. If you have his twin brother, I sure could use it. Don't have much to trade, I could scrape together a little beer money.

https://velobase.com/ViewComponent.as...323d9&Enum=118

Ex Pres 

Have a few things I'm pulling from an '87 Fuji Absolute - not sure if they're all OE or not, but the component dates seem to be.
All are in good to VG shape. This bike doesn't appear to have been ridden much, but I didn't get it complete.
26.0 steel seatpost with clamp.
Sugino crankset w/matching English BB. Alloy arms swaged to steel rings.
Wheelset with 27x1 1/4" alum rims. Front hub is alloy SR q/r, rear is steel KK nutted. Need bearings serviced or adjusted.
Suntour 6s freewheel 14-28 4 prong. Looks virtually unused.
One Dia-Compe N500 brake (nutted rear/would prob. fit recessed front) caliper.
One Dia-Compe non-aero lever, w/extension, right/rear.
Tien Hsin steel headset - marks on top nut. Haven't measured for ISO/JIS yet, assume JIS.
Steel pedals.
85mm alloy stem (no name), currently attached to 39cm c-c Hsin Lung HL steel drop bars.
May have the Avocet Touring saddle as well. Haven't decided.

Need: a few things to complete this build
8 or 9s Shimano/SRAM cassette ~12 to 27
using SunTour bar-cons - or would swap them for indexed bar-ends to match the cassette.
Light alloy 26.0 seatpost (in black preferred)

buldogge

What kind of brake calipers are you looking for...anything specific, any specific finish, or quality level??? Singles or duals??

Otto Rax

Looking for a CHROME Northroad style moustache handlebar. Everything I can find seems to be alloy, but I need a steel one. Diameter is unimportant, but low price is thanks!

RobE30

I know there are a bunch of seat posts @ the CO OP you gave your unsold bikes to. I'm going down probably Tuesday so I'll scope it out for 26.6 posts. I know there weren't any decent brakes a month ago, but that changes.

southpawboston

i've got an SR laprade 26.6 seatpost, microadjust. however, it has pretty bad insertion marks. i also have a pair of shimano 600 F/R calipers w/recessed bolts. the calipers are good, but the original pads are shot.

ColonelJLloyd 

Update List:

ISO:

* 27" Wolber 58, 36h rim only or mounted to any silver front hub (100mm)(good condition or better)
* 130 BCD Crankset (170mm)(rings not a deal breaker)
* All chrome frame pump to fit 25" frame (~57cm between bottom of TT and BB)
* vintage cantilever brakes (front and rear)

HAVE:

* Suntour Barcons
* ALE Inox toe clips (size small)
* SR Custom stem 22.2/25.4, 100mm reach
* Compe stem 21.15/25.4, 100mm reach (the odd 70s/early 80s Schwinn size stem)
* Shimano 6 sp indexing (or friction) DT shifters (originally matched to Deore derailleurs)
* Dia Compe centerpulls (all hardware, cleaned and lubed, ready to go)(front brake is recessed mount)
* Araya 27 x 1 1/4 rims laced to Sansin hubs (126/100)(36h/36h I think)
* Raleigh branded braze-on mounted (5M) Flikstand
* 1st gen. Suntour Cyclone GT RD in excellent condition save for the missing upper pulley spring (parts RD)
* 26.2mm seatpost (UNO brand, black, single bolt)
* Pound notes, loose change, bad checks, anything

toytech

In search of seat post in 26.6mm, Campy preferred.
Have: Campy 27.2mm NR post for trade

rat fink

Welcome to rat fink's newly updated list. Please peruse carefully, as options have changed.


Have:

PHOTOS HERE



- Tacx Tao bottle cage (Black/Silver)
- Shimano SPD-SL cleats (the yellow ones, AKA model SM-SH11).
- Dia Compe AGC brake Levers (black)
- Felt 42cm anatomic bend bar (similar to Ritchey Biomax II)
- Cinelli 63-40 bar (without grooves)
- Cinelli 1A stem 100mm
- Suntour Superbe Pro DT shifters
- Suntour Superbe Pro 28.6 FD
- Campagnolo Chorus 1" threaded headset
- Shimano Sora RD
- Modolo quill stem 120mm (graphite, new)
- Specialized quill stem, missing wedge and bolt, 120mm
- Dia-Compe aero levers
- Dura Ace 7400 non-aero levers (the early ones with drillium handles)
- LOOK delta pedals; several varieties: red, black, gray (Mavic branded)
- toe clips and straps w/ adapter set that is compatible with LOOK delta pedals
- LOOK delta cleats, all varieties; NEW
- Shimano SPD-R pedals (PD-535), no cleats
- Time Criterium pedals (yellow/blue)
- Wellgo SPD pedals with Bianchi name on them (RC-703; blue), no cleats, but they are SPD compatible
- Dura Ace cranks arms 172.5mm (FC-7700)
- Shimano Ultegra double crankset 175mm (FC-6500), nice
- Ritchey Logic/Sugino drive side crank arm 175mm (square taper)
- Various cartridge/cup and spindle bottom brackets, all English thread
- Shimano 105 9s short cage RD, (RD-5500)
- Shimano 105 10s medium cage RD, (RD-5600), new; take-off
- Several Shimano Utegra braze-on FDs, varying condition, double/triple, 6500/6600 series
- Shimano 105 double FD 28.6 clamp-on
- Shimano 105 rear freehub 8-10s, 32h (FH-5501)
- 32h rear Shimano 600 freehub (8-10s) laced to unknown semi-aero tubular rim[/COLOR]
- Front aero clincher wheel, cartridge bearing hub, Araya semi-aero hard anodized, laced 28h radial; very light
- Mavic Gl 330 box section tubular rim 32h, almost new
- 27" Mavic Module E clincher rim 36h
- Dia Compe Aero Gran Compe aero levers
- Dia Compe Royal Gran Compe 400 brake set
- Several Shimano and Sram road and mtb cassettes, almost all Ultegra level or higher, most have low miles, 8-10s (mostly 9s), many sizes; large and small, just ask!
- 26.8 x 350mm FSA 2-bolt non-setback seat post, black
- 26.6 Sugino Super Mighty micro-adjust setback seat post
- Deda Elementi Newton 26 stem: 26.0 clamp, 100mm, -/+ 12 degree rise
- Deda Elementi Magic stem: 31.8 clamp, 120mm, -/+ 12 degree rise
- 3T threadless stem: 31.8 clamp, 110mm, -/+ 10 degree rise
- Nitto 1" quill threadless stem adapter
- Shimano, Campagnolo, and Ritchey double chain rings; all 53t and 39t double type
- Shimano DT cable stops
- a pair of new Blackburn bottle cages, kind of bluish in color
- a pair of Specialized polished aluminum cages
- Specialized Rib Cage Pro bottle cage (carbon fiber look)
- (possible) 56cm 1986 Schwinn Peloton frameset w/ Columbus SL tubing, white w/ black chrome stays


Want:

- Shimano Dura Ace 1" threaded headset, or similar quality headset with low stack height
- Specialized Rib Cage Pro bottle cages. Preferably, in the color shown here on the bottom left: https://www.bike24.com/images/products/p045894.jpg (...or Black, or Gray)
- Tacx Tao bottle cage (Black)
- Fizik Arione saddle
- Nice brake cables (Dura Ace, Yokozuna, Nokon)
- Black bar tape
- Integrated 10s brake/shift levers: Sram or Shimano
- Park TS-2 or other high end truing stand
- FRN
- Offers

Bianchigirll 

RatFink did you sell that RockShox fork?

gbalke

OK, I'm guessing that your wife was out of the house when you took these pictures.

rat fink

Nope. I still have it.

Umm, yeah! In retrospect, it would have been wise to use a higher contrast backdrop than that.

Force 

ISO - rear rack for my Specialized Expedition. Will need to mount on inside of seat stays.

Have - Campy Super Record bits, lots of quill stems, etc.

thenomad

I haven't measured it but is that seatpost size used on 80s Schwinn Super Sports? I have one of those floating around as it fits on nothing I bring in.

ColonelJLloyd 

I'm currently working on a 1981 Schwinn Super Sport (Tange Champion) and can confirm that it takes a 26.6mm post. That bike's a candidate for 650B conversion if I've ever seen one.

RobE30

I have an old Jim Blackburn rear rack. Whats the measurement you need?

Force 

RobE30 - thanks for the post. I will measure tonight and let you know.

Bianchigirll 

Mr Rat Fink; what size is the steerer? I assume it is fr 26" wheels (MTB) yes? is the bridge drilled? would this work on a road bike with side pull caliper?


Everyone; OK I am officially searching for a better quality 700c suspension either for canitlever or regular road brakes. 1" long steerer


clearer?

Bianchigirll 

thanks for clearing that up. I also edited my post a bit

Zaphod Beeblebrox 

apologies to everyone who replied to me...I forgot I posted in this thread I need to subscribe to it

Much thanks to everyone who PM'd me.

thenomad

Cool. I guess I have that size too then.
I'd love to get a Super Sport Columbus frame to ride for a while as I really liked the one I had briefly but it was way too large.

rat fink

Hey BG, I'll throw a wheel in it tonight and see what can be gleaned from the situation.

jet sanchEz

I think I have one of these but it is dark out in the garage now so I will take a photo tomorrow and send it to you.

rccardr 

Nomad, there's a pink '87 SS frame- NOS- on eBay right now. Seller told me he has a 21 in stock as well. Not cheap at around $300 shipped, but if that's what you want...