ISO and For Trade thread parts 2 and 3.
#477
Member
Join Date: Mar 2007
Location: Brooklyn
Posts: 30
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Want to buy:
26.6 seatpost
French stem, 90-110mm, 22.0 diameter - anything so long as it's not an AVA or Pivo deathstem.
French track hubs: ideally, I'd like an old set of high-flange Maillards, but I would take anything front or rear, so long as the front is 96mm and not 100.
PM please or email benbutler78 at hotmail dot com.
26.6 seatpost
French stem, 90-110mm, 22.0 diameter - anything so long as it's not an AVA or Pivo deathstem.
French track hubs: ideally, I'd like an old set of high-flange Maillards, but I would take anything front or rear, so long as the front is 96mm and not 100.
PM please or email benbutler78 at hotmail dot com.
#481
Member
Join Date: May 2006
Posts: 35
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have:
Peugeot Reynolds 753 Frameset size 57cm (square) - no dents, paint in medium condition
Want:
Frameset in 55 square (steel) preferably japanese or american maker
Peugeot Reynolds 753 Frameset size 57cm (square) - no dents, paint in medium condition
Want:
Frameset in 55 square (steel) preferably japanese or american maker
#482
Senior Member
Join Date: Aug 2003
Location: Tampa, Florida
Posts: 13,954
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Likes: 0
Liked 109 Times
in
78 Posts
#483
Dropped
EDIT: miamijim made a very generous offer, but it's not what I need. Still looking!
Last edited by JunkYardBike; 01-30-09 at 06:54 AM.
#484
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,410 Times
in
910 Posts
Need:
Quill (22.2) 75-80mm max stem/bar combo, with bars 42cm wide or wider.
Look pedals that can use Delta cleats (old style).
Yellow saddle, good condition, I'd have to see pics.
Have:
31.8/44cm Eleven81 new bars, anatomic.
Cinelli 66/38 mint bars, no grooves
Campy Mirage 31.8 double FD, new.
Campy MIrage braze-on triple FD, new.
Shimano 105 brake calipers
Shimano 105 RD
Shimano RSX FD/RD (were on an 8-sp)
Cinelli 1R 140mm stem 26.4 clamp.
Alex A400 front wheel 700c black, laced to Shimano 2200 hub.
Aussie black deep V front 700c wheel laced to an Ultegra hub.
Shimano 600 tricolor FD, braze-on (2)
Shimano Light Action DT shifters, 2x6 and 2x7
Quill (22.2) 75-80mm max stem/bar combo, with bars 42cm wide or wider.
Look pedals that can use Delta cleats (old style).
Yellow saddle, good condition, I'd have to see pics.
Have:
31.8/44cm Eleven81 new bars, anatomic.
Cinelli 66/38 mint bars, no grooves
Campy Mirage 31.8 double FD, new.
Campy MIrage braze-on triple FD, new.
Shimano 105 brake calipers
Shimano 105 RD
Shimano RSX FD/RD (were on an 8-sp)
Cinelli 1R 140mm stem 26.4 clamp.
Alex A400 front wheel 700c black, laced to Shimano 2200 hub.
Aussie black deep V front 700c wheel laced to an Ultegra hub.
Shimano 600 tricolor FD, braze-on (2)
Shimano Light Action DT shifters, 2x6 and 2x7
#485
Senior Member
Thread Starter
Join Date: Dec 2001
Location: n.w. superdrome
Posts: 17,687
Bikes: 1 trek, serotta, rih, de Reus, Pogliaghi and finally a Zieleman! and got a DeRosa
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 9 Times
in
9 Posts
Have:
Mavic Sport tubular rims (usually OEM with bikes) 36 hole 3x, laced to generic (possibly suntour hubs)
Rims are clean, bearings could probably use a repacking.
want:
Mavic GP4, or Gel330 rims
do not have to be laced to hub, would prefer 36 hole but will take 32 hole.
Mavic Sport tubular rims (usually OEM with bikes) 36 hole 3x, laced to generic (possibly suntour hubs)
Rims are clean, bearings could probably use a repacking.
want:
Mavic GP4, or Gel330 rims
do not have to be laced to hub, would prefer 36 hole but will take 32 hole.
__________________
Sono più lento di quel che sembra.
Odio la gente, tutti.
Want to upgrade your membership? Click Here.
Sono più lento di quel che sembra.
Odio la gente, tutti.
Want to upgrade your membership? Click Here.
#486
Put some lights on!
WTT: 60cm Giordana Pista for 58/59cm touring bike
I have a 60cm Giordana lugged, steel track frame set up porteur style. It's a nice lightweight frame, but too big....and I've found that coasting is important to me. I'm pretty sure it's a 1989-90 frame. No tubing decals, but all the other pearl gray w/magenta lettering Giordana frames I've seen have been built with Oria ML-25 tubing. Paint is chipped and scratched. It's set up with Nitto Promenade bars, bar end levers and a front Dia-Compe centerpull 500(?) brake. I'm keeping the wheels, but I'm open to swapping it bare or built-up.
I want: 58/59cm lugged steel bike with cantilever brakes. Mid-upper level model. Maybe you have an extra Lotus Odyssey, Univega Gran Turismo, Columbus tubed Schwinn Voyageur SP or Panasonic PT-5000? Please, no unicrowns.
I attached a link to my Flickr page, but I haven't had much luck with making these work in the past.
https://farm4.static.flickr.com/3289/...f38354f8_b.jpg
I want: 58/59cm lugged steel bike with cantilever brakes. Mid-upper level model. Maybe you have an extra Lotus Odyssey, Univega Gran Turismo, Columbus tubed Schwinn Voyageur SP or Panasonic PT-5000? Please, no unicrowns.
I attached a link to my Flickr page, but I haven't had much luck with making these work in the past.
https://farm4.static.flickr.com/3289/...f38354f8_b.jpg
#487
Junior Member
Join Date: Apr 2007
Location: Laramie, Wy
Posts: 184
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Looking for:
Front pivot bolt for 2nd generation C-record rear derailleur. (I'd take the whole thing if needed)
Front nut to mid 90s campy brakes.
26.6 seat post
Silver Cinelli quill stem ~120mm (prefer 1R but not picky)
57/58cm Zeus, Razesa or any other vintage Spanish frame
Have:
Nice AGC brakes
NOS (kinda) smoked chrome 3t stem
Some Nokon cables/housing
Black Cinelli 1A stem
Random Cinelli bars
Shimano R700 10sp shifters
Most of a Shimano 10speed group
Original "drewed" Tommasini frame (59cm)
Some George Washington's...
I have pic's of pretty much everything, so let me know if your intereseted.
Thanks
WjV
Front pivot bolt for 2nd generation C-record rear derailleur. (I'd take the whole thing if needed)
Front nut to mid 90s campy brakes.
26.6 seat post
Silver Cinelli quill stem ~120mm (prefer 1R but not picky)
57/58cm Zeus, Razesa or any other vintage Spanish frame
Have:
Nice AGC brakes
NOS (kinda) smoked chrome 3t stem
Some Nokon cables/housing
Black Cinelli 1A stem
Random Cinelli bars
Shimano R700 10sp shifters
Most of a Shimano 10speed group
Original "drewed" Tommasini frame (59cm)
Some George Washington's...
I have pic's of pretty much everything, so let me know if your intereseted.
Thanks
WjV
#488
Full Member
Join Date: Aug 2007
Location: Northern AZ
Posts: 217
Bikes: '80 Medici Tourismo, '82 Merckx, '85 Peugeot PSN10, '86 Ironman, '89 Trek 520, '96 Steelman, '96 Torelli CX, '97 Friday Two'sDay, '02 CoMo Speedster, '09 Giant Reign, '10 Canfield, '13 Turner DHR, '16 Chase BMX
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 256 Times
in
51 Posts
WTB: A set of tubular wheels. Must be shimano hyperglide cassette compatible. Hubs must be silver, prefer rims to be silver but hard anodized is OK. No carbon. Would like them to be a matching set. These will go on my PSN-10 which I use for climbing. If interested, I can trade for a very nice 63 cm tange Univega.
Thanks, Brenda
Thanks, Brenda
#489
Put some lights on!
I have a 60cm Giordana lugged, steel track frame set up porteur style. It's a nice lightweight frame, but too big....and I've found that coasting is important to me. I'm pretty sure it's a 1989-90 frame. No tubing decals, but all the other pearl gray w/magenta lettering Giordana frames I've seen have been built with Oria ML-25 tubing. Paint is chipped and scratched. It's set up with Nitto Promenade bars, bar end levers and a front Dia-Compe centerpull 500(?) brake. I'm keeping the wheels, but I'm open to swapping it bare or built-up.
I want: 58/59cm lugged steel bike with cantilever brakes. Mid-upper level model. Maybe you have an extra Lotus Odyssey, Univega Gran Turismo, Columbus tubed Schwinn Voyageur SP or Panasonic PT-5000? Please, no unicrowns.
I attached a link to my Flickr page, but I haven't had much luck with making these work in the past.
https://farm4.static.flickr.com/3289/...f38354f8_b.jpg
I want: 58/59cm lugged steel bike with cantilever brakes. Mid-upper level model. Maybe you have an extra Lotus Odyssey, Univega Gran Turismo, Columbus tubed Schwinn Voyageur SP or Panasonic PT-5000? Please, no unicrowns.
I attached a link to my Flickr page, but I haven't had much luck with making these work in the past.
https://farm4.static.flickr.com/3289/...f38354f8_b.jpg
#490
Senior Member
Join Date: Dec 2005
Posts: 7,848
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
WTB: A set of tubular wheels. Must be shimano hyperglide cassette compatible. Hubs must be silver, prefer rims to be silver but hard anodized is OK. No carbon. Would like them to be a matching set. These will go on my PSN-10 which I use for climbing. If interested, I can trade for a very nice 63 cm tange Univega.
Thanks, Brenda
Thanks, Brenda
#491
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,410 Times
in
910 Posts
This just in,.....
Have:
Adjustable Campy Chorus FD, clamp is adjustable from 28.6 to 31.8, great shape.
28.6 NR FD in great shape.
The stuff in post # 499 above.
Need:
Braze-on Campy Chorus FD, or suitable equal. Need the logo'd model.
Chorus headset 1" threaded.
Have:
Adjustable Campy Chorus FD, clamp is adjustable from 28.6 to 31.8, great shape.
28.6 NR FD in great shape.
The stuff in post # 499 above.
Need:
Braze-on Campy Chorus FD, or suitable equal. Need the logo'd model.
Chorus headset 1" threaded.
#492
Senior Member
ISO...WTB...
One Campy brake shoe, circa 1988 style. It's chrome with small oval holes, black block. Left side if it makes a difference? Logic says no, but anyway... One complete shoe is missing on the Benotto, including the white coated guide.. Also need an FD, or an unbroken clamp strap. Anybody got one with a mangled cage? 1988 Chorus group.,,,,BD
One Campy brake shoe, circa 1988 style. It's chrome with small oval holes, black block. Left side if it makes a difference? Logic says no, but anyway... One complete shoe is missing on the Benotto, including the white coated guide.. Also need an FD, or an unbroken clamp strap. Anybody got one with a mangled cage? 1988 Chorus group.,,,,BD
__________________
So many bikes, so little dime.
So many bikes, so little dime.
#493
Senior Member
Join Date: Dec 2005
Posts: 17,160
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,717 Times
in
2,614 Posts
This is a repost as the first trade didn't work out:
Have: a pair of Continental Ultra Gatorskin tires, 700 x 25c, wire bead, marked "Duraskin + K, Made in Germany." These have very little wear if any (I pulled them off of a wheelset I recently bought).
Want: a pair of similar tires in 28c or wider, kevlar or wire bead. Panaracer Pasela Tourguards in 28-32mm width would be fine.
Neal
Have: a pair of Continental Ultra Gatorskin tires, 700 x 25c, wire bead, marked "Duraskin + K, Made in Germany." These have very little wear if any (I pulled them off of a wheelset I recently bought).
Want: a pair of similar tires in 28c or wider, kevlar or wire bead. Panaracer Pasela Tourguards in 28-32mm width would be fine.
Neal
#494
Senior Member
Join Date: Jul 2007
Location: Chattanooga
Posts: 1,154
Bikes: '93 Bridgestone RB-1, '91 Specialized Allez Epic, '85 Raleigh Team Pro, '78 Andre Bertin, early '90s F. Moser Leader AX , '85 Centurion Equipe, '98 Litespeed Tuscany, '89 Klein Quantum, '80 Nishiki Superbe, '83 Peckham, '84 Fuji Opus III
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 12 Times
in
9 Posts
Aero Grand Compe brake ad mount
I need a single offset-hole, non-concentric, recessed disc/bolt mount for the brake pad of a AGC caliper. Heck, I need the pad, too. Looks like this..(image courtesy of Velobase)...
https://www.velobase.com/ViewSingleCo...=117&AbsPos=21
Thanks.
https://www.velobase.com/ViewSingleCo...=117&AbsPos=21
Thanks.
Last edited by afilado; 01-31-09 at 11:53 AM.
#495
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,792
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3591 Post(s)
Liked 3,401 Times
in
1,935 Posts
#496
Senior Member
Join Date: Sep 2008
Location: Collegeville, PA
Posts: 1,350
Bikes: Ruckelshaus Randonneur, Specialized Allez (early 90's, steel), Ruckelshaus Path Bomber currently being built
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Yup. Starting to think about how I want my new Tourlite built...853 with polished stainless longpoint lugs, I think, unsure about the paint. Either vintage English style panels, or Cinelli silver and see if I can get some Cinelli-esque Bilenky transfers made up...if he goes for it.
Pete
Pete
#497
Full Member
Looking for a replacement toe clip like these:
Whether somebody has one or knows where to buy one, either way. I'm having a hard time finding this type of toe clip other than the occasional overpriced eBay listing.
Whether somebody has one or knows where to buy one, either way. I'm having a hard time finding this type of toe clip other than the occasional overpriced eBay listing.