nlerner

I might have that. Will you email me to remind me to look? lerner dot n at gmail dot com

icepick_trotsky 

Oops, I mistyped. Mine is 32, sorry.

Univegavelo

Hey guys!

ISO:

some touring panniers, 700c wheels, 56-58cm steel frames.... open to a lot.

Have a 2100 Trek carbon/aluminum frame at 57.5 C-T, rides great, just am more of a fan of steel, might have a wheelset depending on what I can get in return.

Good to be back on the forums!

Cheers

Relaxin 

ISO: Chirstophe toe clips, size Medium and a pair of brown leather straps for my pedals. I'm shooting for early '70's era clips so a pair with period logos would be great. I understand there are several different mounting styles. I need the standard mounts for pedals with reflectors. I'm looking for a pair of straps with a darker shade of brown leather closer to mahogany than redish/orange.

They don't have to be cosmetically nice but need to be in good working order. I'd actually appreciate equipment that shows its age.

I have the following 80's era parts
Shimano 7spd Downtube shifter SL-A400, friction/index with flat mounting washers, not the curved ones, and matching bolts
Shimano Exage 300EX RD, the plastic cable tension nut needs to be replaced, jockey wheels are about 6/10
Shimano Exage Motion single pivot brakes, front and rear, using recessed bolts BR-A250 49-39mm reach, needs new brake pads
Sakae SR 80mm stem that looks like someone hammered on it a little for removal although I don't see any corrosion on the inserted portion of the stem that would have cause it to stick

I have the following parts which are new and unused.
Token brand alloy lockring for Shimano 12T cassette, black anodized
Token brand alloy lockring for Shimano 11T cassette, red anodized
DT Swiss alloy lockring for Shimano 11T cassette, raw silver color
Shimano 11T cassette replacement cog
Shimano Cassette Lockring washer for 12T

Aluminum seatpost, 27.2mm, 11in long, 2-bolt off my 2012 Specialized Allez, three small scratches on the back of the tube. This came off my 2012 Specialized Allez Expert. I swapped it for a carbon post.

Insidious C. 

@sloar how about this one? Already dismounted. Good used shape but not perfect. 36H. If interested I have two more pics I can send you.

skidmarkroyalty

ISO: italian thread campy record non adjustable side bottom bracket cup, good condition with no damage from removal! Email skidmarkroyalty@yahoo.com

enjoybikes

ISO: campy Athena Cranks/rings 1988-90 era, 172.5 or 175 with ital bb

Have: Campy Athena crankset 53/39, 170mm moderate wear on rings with English bb

thx

Stevensb 

Looking for Zeus parts from 1970's - Criterium preferred however other groups considered:

Brake levers, brake calipers, 27.2 seatpost, clamp on d/t shifters, d/t cable guide, pump umbrella, etc.

Thanks.

Brad

Stevensb 

@enjoybikes:I have a mid to late 80's 172.5 strada crank set if you are interested. I can send pics.

Brad

enjoybikes

^^

Pics would be nice thanks @Stevensb. Going to need an italian bb also, any chance you've got the match? Thanks

hillikus

ISO: the bolt thats goes through Suntour /Raleigh approved barend shifters.

BluesDaddy

Sent you a PM. Interested in the 2100

RobbieTunes

I have a set of Italian cups, great condition, have no idea what they are/came from. will email.

simmonsgc

Still looking for a single suntour bar end shifter to complete a mountain drop bar conversion. Would be willing to do a lop-sided trade for road stuff. PM me if you might help. Thanks!

BluesDaddy

ISO:
- Road levers for V-Brakes -OR- Travel Agents to use regular road levers with V-Brakes
- Bar-end shifter pods (Suntour or Shimano; levers not necessary)

HAVE:
Lots of 80s Shimano, couple frames, wheels, Raleigh bits

ALSO looking to trade my Winwood carbon CX fork for something less steep (trying to cure a toe overlap problem) 1-1/8" threadless, canti studs

tyler_fred

ISO: Pair of Shimano SLR BL-1051 black aero brake hoods (with or without levers.) Looking for used, not abused.

jethin

ISO some small Campy bits to make matching sets:

- ISO: NR front skewer, nutted, curved arm
- Have: Front skewer (Gran Sport?), circlip attached curved lever (very good)

- ISO: 1 or 2 NR skewer nuts, curved edge
- Have: 1 or 2 Record skewer nuts, straight edge conical (very good)

- ISO: NR crank dust cap, "Brev"
- Have: NR crank dust cap, "Patent" (excellent)

Have some other stuff too...

Henry III

ISO 32 hole high flange record hub. I don't even need the axle or any other hardware. Already have a complete hub but have a NOS 32/36 hole rims I want to lace up and I just have 36 hole hubs.

Narhay

One Normandy high flange front hub cone. The one I have has a couple pits on it.



One plastic Simplex downtube shifter wing nut (one of my wings has broken off) and one right shift lever. My shift lever is fine but the hood is cracked.


One simplex prestige pulley cage.


Bar clamps for these mafac levers

Cable clamps and brake post clamp/barrels for mafac racer centerpulls. Mine have rusted. Top left and bottom left in the photo. Two sets for two brakes.


Black Brooks B17 in new or like new condition.

Simplex LJ clamp on front derailleur or something nice and similar, ideally with the cable stop built into the front derailleur.

Simplex lj rear derailleur in excellent condition or something nice and similar.

French 22.0 stem with less than 100mm reach. The bars seem to measure about 25.2 consistently. The stem I am replacing (ava death stem) seems to measure about 25.4 in the clamp at rest.

Have:
Lots of M732 xt, M730 xt, couple some MTB stems, lx, DX front derailleurs, lx cranks with bash guard, cassettes, pedals, competition french stem 22.0 with what seems to be 24.8 clamp, 80mm reach...other items. I'm sure these are a long shot but who knows.

mountaindave 

Building up a Gitane, @Narhay? Let us know if you find a surplus of those cones, I could use some myself...

mountaindave 

Those hoods can be found for $10 shipped on ebay - bought some last year myself.

Narhay

Not quite a gitane. I thought maybe the picture of the shifters might give it away but it is a 1971 Peugeot px10. I've been whiling away at it trying to square up the little details and suddenly $100 worth of tiny little nos bolts on eBay doesn't seem so outrageous anymore.

mountaindave 

I know exactly what you mean. I've seriously considered buying a spare Normandy Luxe Competition hub just for the cones...

crank_addict

narhay- If you can chase down where the B.O.C. is, I put a few of those Simplex plastic DT wingnuts in there (month ago??). Whoever has the box can maybe pick and drop them in an envelope.

Stevensb 

I'm looking for the NDS mate to this Campy Strada 170mm crank arm - date code is 1985 ('box 11')



Would also like to find a dust cap for a Campy Grand Sport pedal - rider quality.

Thanks.

Brad