sonatageek

Nashbars are steel -- fyi.

PlatyPius

Okay, how about this....

23skidoo has the post that I want. sunburst wants the post that I have.

sunburst - get with skidoo and send him something that he wants.
23 skidoo - send me the 26.6 post.
Me - I'll send the 27.0 post to sunburst.

Sound fair to everyone?

23skidoo

Only if sunburst sends me the Faggin with the new seatpost installed show me your trade bait brudda...

kknh3

HAVE

Original Dura Ace 36h low flange hubset. Date code Z I. They are just like the low flange version on this brochure page.

75 Dura Ace Hubs

When I got them, the axle in the rear hub was bent. I've replaced it with one from Wheels Mfg. However, the original had a keyway slot and the washers had a tab to fit in that keyway. I haven't reassembled them. I haven't taken the time to grind the tab off the washers. I removed the bearings without removing the dustcaps, so they are fully intact. Skewers are included, but are a little rusty in spots.

Spokes from wheels with the Dura Ace hubs. 305/306 mm by my best measurement. They measure at 1.8mm diameter nominally and have a "star" imprinted on the head. I've kept them separated by wheel and side. The 36 from the front wheel are in good shape. One set of 18 from the rear have significant wear near the heads. The other 18 are in good shape.

MKS AR-8 clip pedals with chrome Christophe cages and plastic/nylon straps. These came off a Schwinn Passage touring bike.

Shimano "333" 5-speed freewheel
Suntour (Maeda) 6-speed freewheel
Maillard freewheel hub, 126mm, 36h
Axles, cones, nuts, washers and bearings from a Sunshine 5345 hub - all in great shape

1 pair XL J&G touring shorts. Worn twice.

Suntour friction/ratcher bar end shifters

J&G touring shorts

WANT/NEED

36 hole freehub for Shimano 7-speed cassette suitable for 250 lb rider. Something like Shimano XT or better

Shimano 7-speed, 11 - 34, Mega Range cassette

Shimano 7-speed indexed bar-end shifters

Soma High Rider stem adapter or similar. Soma stem adapter I need something with the length like the Soma.

Adjustable stem to fit 1-1/8" threadless and 25.4 dia. bars. 90 - 110mm

Aero brake levers for big hands

Alloy anatomical drop bars. 25.4 dia. and 42/44 mm

Cyclist01012

Have:

2 Pair Bontrager Corvair MTB Wheel sets Rim brake only. These are the older ones that have the designed By Keith Bontrager Stickers on them.

Manitou Elite fork (made by Answer)

One pair of Promax V brakes. (Levers brakes and cables. Pads are included but pretty shot)

One bontrager triple crank 170 with crank bolts and square taper bottom bracket NO chain rings or chain ring bolts (maybe 5000 miles)

One pair Sora triple shifters 8 speed normal wear and tear from use not abuse (Maybe 5000 miles also)

One Messenger bag by Columbia Sportswear. Small with lots of internal padding. would be good for a laptop.

Brooks b72 (Old some cracking of the leather but you should be able to clean it up )

Want:
ultegra open pro wheels or other heavy duty road wheels.

Speedplay frogs. or x series

Brooks saddle (prefer b17, swift or cut b17

Make offer with other stuff you think might get my interest

54 cm track frame and fork (I can always dream can’t I?)

truing stand

Email Keith1759@aol.com for pics

bw286

Shimano 600 172.5mm cranks. very good condition, one small spot of heel rub on NDS


NOS Ritchey Logic Crankset 172.5, double.
from what i can tell, these are pretty rare in anycondition. mine are new.


FSA Carbon Crankset. 170mm, 130bcd


56T QBP Engagement ring. mounted for a TT bike, ridden 2wice


Bars, top to bottom:
Syncros Ti flatbar, 25.4 i believe
generic riser bar, 15 deg sweep
Deda Crono Nero bullhorns 31.8mm clamp, 42cm ctc


NOS Sakae FX, 70mm, 26.0


both these guys look to be fiarly high quality
silver- 95mm, 26.0 clamp, japanese but unbranded.
black- guessing it to be 80mm, 26.0 clamp. unbranded but nice


Funky supersetback titec post, 27.2. some very light scratches in the black


2 silver 26.8 posts
american classic is long, clb is short and with mucho setback

Shimano 105 (greenish) front brake, no nut included

PlatyPius

Those were the shiznit 'back in the day'.

I remember that SuperGo had them on sale at one point for $89 and I couldn't afford it. I was so pissed. lol.

bw286

all i know is they are not 130bdc. i need to get to the LBS to measure them soon.

cudak888 

bw286, you did not list anything that you wish to trade for.

-Kurt

bw286

sorry, had to do it in 2 posts, didnt get the second one in on here.

Business810

Here are some updates to the list, though I am starting to think some of my "wants" are a long-shot and I may be better served purchasing them...

Have:

NOS Araya Aero 2 polished, unmachined tubular rim, 32h
Selle Italia Flite with titanium rails - older style from the 90's, again well-worn but functional
Shimano Deore XT 32h hubset, rim brake only
Kalloy Laprade seatpost, 25.8x350mm
Thomson Elite seatpost, 26.8x410mm
1988 Centurion LeMans, 58cm, complete bike with a Exage Sport/600 component mix
2003 KHS Alite 500 MTB frame, 17" center-to-center, includes brand new replaceable derailleur hanger
Manitou Mars fork - 7.25" steerer length, stem and Cane Creek headset included, but needs to be rebuilt
NOS FSA Moto cranks, 24t/36t/bashguard, external bearing
Shimano 14-28t 6 speed freewheel
Stronglight 86bcd 48t chainring
NOS SR 74bcd 34t chainring
NOS unbranded 130bcd 40t chainring
Shimano 130bcd 39t chainring
Shimano 130bcd 53t chainring
Suntour Cyclone M-II front derailleur, clamp on
Bianchi celeste water bottle cage
Shimano 105 front brake, BR-1055
Shimano 105 rear brake, BR-1055 (assuming I can get the Ultegra rear listed below!)
Shimano Dura Ace front brake, date code "ZK"
Dia-Compe Power Control 7 flat bar brake levers
Shimano Deore LX brakes, front and rear, BR-M750
Shimano STX RC flat bar brake levers, BL-MC40
Nitto forged "I-beam" style stem, 80mm
Nitto Olympiade 115 bars, ~36cm wide
Schwinn Collegiate owner's manual


Want:

dust caps for SR quill pedals (as seen here on Velo Base - the MKS replacement caps might work, too)
Shimano Ultegra rear brake, BR-6500 or -6600
Brooks Pro, Swift, or Swallow, preferably in black
brown leather saddle - Brooks, Ideale, etc., not as picky about model
SKS Raceblade fenders

huerro

Want:
triple trekking crank set
long cage rear mech (neither of these need to be anything fancy, just mechanically sound)
cones for Exage hubs

Have:
Cinelli Giro-D'italia bars 64-40 plenty of scratches
Cinelli 100mm stem. ok condition
27.2 Shimano 600 aero seat post good condition. Blingy.

-holiday76

want:

Mavic levers, aero or non aero.
25mm seat post

have:
wrights saddle, brown
simplex retro-friction gold levers
mavic starfish crank, no rings, 172.5

other stuff too, what are you looking for?

USAZorro

ok - here's where I stand. I have a project that screams for black stem and bars. I have a black Cinelli stem - 26.4, and a black ITM handlebar - 26.0. The combination won't work together too well.

Want:

- Either a black stem, 90mm length +/- 10 mm with 26.0mm opening for the bars - - - or black bars 40-42 cm width, with a 26.4mm diameter mating surface. Single groove would be ideal, but I'll take what I can get here.
- Black, medium reach brake calipers.
- Rear derailleur with sufficient pull to handle 9 speed cassette (different project)
- STI levers (brifters - model/brand not especially important) for 9 speed (for the other project)

Have:

- Would be willing to part with either of the items I would no longer need.
- I have other stems
- Another bar (modolo speedy)
- Some 6 speed freewheels
- Brake levers
- 144 bcd chainrings
- a nice front wheel - Dura Ace hub, matrix aero rim
- some other things.

23skidoo

I've got a nice long cage Deore LX in excellent condition I'd swap for that Blingy, plus a little extra if you don't think a straight swap is an equitable deal. If you want to see a pic, drop me an email addy in a PM and I'll snap a couple and attach them in a return. I've got to leave for my part-time job as a city-rec volleyball official--I should be paying them for all the lovely spandex exposure--but will be home around 10:30 central and can take care of it then since I'm pretty much a night owl.

bw286

some more thingys. see my list above for wants
got a big pile of stuff that's not doing anything sitting around.
anyone got some interest? hudson valley area, but i will ship 'em

Antipodes

...and heavy.

PlatyPius

And Nashbar.

banjo_mole 

I don't have an Ebay account, but if the price stays low, someone should buy it for me:
https://cgi.ebay.com/GIOS-SILCA-frame...3A1%7C294%3A50

We could work something out.

Spinz

I need a Campy Centaur double front derailleur with a 28.6mm clamp. I have some stuff listed on page 14 for trade. PM if you have a spare. Lp

monogodo

With my settings, this is page 14.

Spinz

Here ya go. Lp

I have:
Thomson Elite 26.8mm x 330mm silver aluminum seat post that looks new.

1989 Campagnolo Chorus CO10-SM rear derailleur looks very good has a few scratches but functions flawlessly --- white pulleys.

Ultegra 6500 Front Derailleur with 26.8 mm clamp less than 50 miles on it.

Bell Solar Helmet size L yellow and silver, new.

I need a 28.6 braze on adapter -- silver.

Geordi Laforge

I have: Cinelli Campione del Mondo 66-40 in 26.4.

excellent condition besides a few scratches from installation into a stem.

bw286

badly needing a 26.0 post. got lots of stuff above^

onetwentyeight 

campagnolo non aero brake levers (1pr or just a single if it matches the ones i have, non drilled levers with campagnolo in a diamondish shape...) i have replacement hoods so condition of them is unimportant to me.