Pedals always upside down
 

Hi,

Sorry if this is a silly question but how do you stop pedals from being upside down in the resting position. When i take my feet off of my lyotard pedals they always go upside down.
It's a bit annoying having to get them to spin over to place my foot properly. Can they be weighted to lie the right way up? I'm not using clips by the way.

Thanks

You could put some stationary bike pedals on your bike as most of those usually have weights on the bottom to keep them right side up. Their pretty gawdy looking though.

There are weighted pedals, but most of us want the parts on our bikes to weigh as little as possible. These make it easier to flip the pedals.

http://cgi.ebay.com/MKS-Spin-Pedal-F...item564022c97f

What type of Lyotard pedals are these? Quill or rat trap?
Quill type pedals usually have a small tang/spike the sticks out of the cage at the rear of the pedal for you to use to flick the pedal into position with your cleated shoe to get into the strap/cage. Rat traps do not have a bottom or top to them so there should be no problem with those, unless you added on a strap and cage to them. You can possibly add a short bolt on the back cage to use to flick the pedals right side up then.

Chombi

I think they are quill pedals.
So there should be a spike to help to flip them over?
I shall check them out later and practice flipping them using the spike.
Thanks for the advice.

CPSC pedal reflectors get in the way of the flip-up tab. This is why I use reflectors only on the fronts of the pedals, with their mounting screws doing double duty for the toeclips, and reflective tape on the backs.

I called it a spike but it's usually more of a triangular shaped tab. There should be on on it if it's a quill type pedal, but admittedly, the French Lyotards do sometime seem to have simpler designs thatn other brands, so I wouldn't be surprised if they left it off., Again, a small short bolt threaded through the back cage portion could do the same job.

Chombi

+1
I just bought a set of these for my MKS touring pedals.

Apparently Chombi didn't follow my link.

Thanks for all of the advice.
I tried it with the spikes and it works out good although i need some practice.
I was originally trying to flip them over with my toes and they kept ending up upside down again doh!
It's nice to learn something new.

It will come naturally after some practice but make sure it dies not distract you too much as most of us almost fell off our bikes or ran into dsomething trying to flip our pedals with the "spikes" the first few times. A few practice session away from traffic will be good to do. Once you get used to it, you don't even have to look at the pedals when you do it.:thumb:

Chombi

UH WOW :twitchy: I have not really used clips and straps for so long I almost forgot about this little bit of joy:innocent:

You need some Campagnolo SGR pedals that have a mechanism that keeps them always facing upwards.

I've got a pair of those but can't bring myself to use them - they are SO heavy!

I have a bunch of NOS Toe Flip brand pedal flippers for sale, if anyone is interested..... :)

http://www.mandurahsbikeman.com.au/shop/images/5610

Sorry. Someone had to.

This is why I like double-sided "platform" pedals. Both sides the same = no upside down!

MKS sylvan touring:
http://i51.tinypic.com/jsk6qv.jpg

I have a pair of lyotard 136r double sided pedals I pulled off an old motobecane mirage that I use on my do-everything around town bike.

The common name for this type of pedal is "Rat Trap" for obvious reasons. Lyotard made jillions of these that came as standard on many Peugeots and other French bikes.

Chombi

Somewhat like the above..
Lyotard 460D (duraluminum) have been easy to flip the toe clip over ,
was the pedal of choice for cyclocross,
before step in pedals came on the scene, as cheap, and good enough.

Until you put toeclips on them, anyway.

Or the Lyotard #23 "Marcel Berthet" pedals, with the extra-large tab to make it easy to flip into the toeclip:
http://www.os2.dhs.org/~john/berthet-pedal.jpg

http://www.flickr.com/photos/stronglight/2585091573/

Stronglight hasn't been around lately and I miss him. He's probably more knowledgeable about C&V bikes than anyone else here. You can get a pretty good education just going through his Photostream site.

Which makes them awesome.

True, I ride all my pedals "naked" though. :innocent:

OP mentioned that he's also not using clips.

+1, A lot of the times I find his photostream while I am looking for something else. Then I forget about what I was doing and read the captions, photo after photo.