![]() |
Originally Posted by ColonelJLloyd
(Post 11765672)
I recently tried the VO half clips with MKS Touring pedals. I liked them better than no clips but not as much as full clips and straps.
Advance apologies to Tom: Holiday, I recently bought a pair of vintage cycling shoes and my LBS has cheap used SPD pedals. What cleats do I need to use these shoes with SPD pedals? I'm clipless ignorant. http://img.auctiva.com/imgdata/4/9/7...0840911_tp.jpg BTW, I'm interested in those 2-bolt slotted cleats if you're looking to get rid of them. |
Originally Posted by JohnDThompson
(Post 11766590)
I don't think those shoes will accept SPD cleats. It does look like they have drillings for Look type cleats, though.
BTW, I'm interested in those 2-bolt slotted cleats if you're looking to get rid of them.
Originally Posted by WNG
(Post 11766470)
Colonel:
I still have my pair of vintage Avia cleated shoes similar to your's. They were only LOOK compatible, not drilled for SPD. SPD wasn't released yet. John, what kind of pedals uses these slotted cleats? |
Rat trap, quill and track pedals all use that type of cleat. The clip straddles the top of the rear cage.
|
Originally Posted by Mike Mills
(Post 11766956)
Rat trap, quill and track pedals all use that type of cleat. The clip straddles the top of the rear cage.
|
I have a size 12 foot (46 Euro) and have always had difficulty with shoes and pedals. I also have flat feet, so often I can develop pressure points in my foot if things aren't properly set...
No question - the best set up for me are SPDs with a cycling sandal (I use Keenes). When cold, I use MTB shoes...preferably something with velcro and some flex in the upper. In my younger days, before SPDs, and when I was a wannabe competitive rider...I used Time pedals and Nike cycling shoes...became they came in widths and tended to run less narrow than the Euro stuff. |
Originally Posted by ColonelJLloyd
(Post 11766970)
I thought so, but wasn't sure if that was the case or if there were pedals with a raised section on the rear cage. Thanks.
http://prollyisnotprobably.com/asset...0x665-1387.jpg |
I've only ever ridden with clips and straps and never found them lacking. There is the knack of getting your shoe into the clip when starting out which isn't all that tough really. The only issue I have is in modern times, cycling shoes have these lateral velcro straps which completely interfere with getting clipped in, no fault of the clips. Next shoes I buy will have laces only, or longitudinal zippers, if such shoes exist.
A nice thing about clips/straps is, in a pinch, you can ride them quite comfortably and effectively in regular shoes, should the need arise. |
Originally Posted by JohnDThompson
(Post 11767102)
Cheers, Chris |
Originally Posted by Chris W.
(Post 11768890)
My all time favorite!!!
Cheers, Chris I didn't find them comfortable. My arch would get bent around the edge. But hmm, maybe my toe clips were just too long back then. Aaron, I can't believe your feet are as big as mine! |
Originally Posted by JohnDThompson
(Post 11767102)
|
Originally Posted by -holiday76
(Post 11765622)
I've been riding spd's for the past 14 years or so and in my situation couldnt imagine not having them for a few reasons:
- my size 13/14 feet dont fit well on those tiny pedals. - getting into straps while at a light is a pain though I'm sure it gets easier over time, but why should i bother? - i havent done a lot of experimenting, but spd shoes have very stiff soles. i havent found any shoes that dont either slip on regular pedals, and also have a stiff sole. cushy soles make for un-comforable feet after just a few miles for me. So anyway, with all that said, I just this week ordered a set of these to try with MKS touring pedals: http://store.velo-orange.com/media/c.../pd-0030_1.jpg i'm hoping that they might be a good compromise if I can find the right shoe and they still look kinda retro. I tried these half clips and couldn't really find any advantage in using them. I just took mine off last week and will probably sell them. |
1 Attachment(s)
I have 3 pairs of shoes (bike shoes, casual shoes and sandals) with Crank Bros cleats, so have Crank Bros pedals on my bikes. I like the Acid 1's for the platform, but will probably get a set of these for my Marinoni. They have a larger platform, and are available in silver for a decent C&V aesthetic: "Mallet"
http://bikeforums.net/attachment.php...hmentid=177731 |
Originally Posted by mkeller234
(Post 11769538)
I tried these half clips and couldn't really find any advantage in using them. I just took mine off last week and will probably sell them.
|
Uh? I was using them on Atom "rat trap" pedals which seem to grip my shoe pretty well and are two sided.
Originally Posted by Mike Mills
(Post 11769667)
The advantage of them is this - they stop your foot from shooting off the front of the pedal and having the pedals serrated edges gouge the heck out of your achilles tendon area.
|
If it never happens to you count yourself lucky. Stuff happens, if it happens to you, then you will appreciate their usefulness.
Other than stopping that forward motion, I think they are marginally useful. I suppose they are also useful to ensure your foot is properly placed (fore-aft) over the pedal's spindle. |
Originally Posted by Mike Mills
(Post 11769812)
I suppose they are also useful to ensure your foot is properly placed (fore-aft) over the pedal's spindle.
|
Originally Posted by Mike Mills
(Post 11769667)
The advantage of them is this - they stop your foot from shooting off the front of the pedal and having the pedals serrated edges gouge the heck out of your achilles tendon area.
I always worry about if my shoes are a wet from dew or rain and I start mashing up a large hill. I may need to ret these on my townie bike just for safety, thaey seem like a good compromise between full cages and nothing at all. |
Originally Posted by mkeller234
(Post 11769538)
I tried these half clips and couldn't really find any advantage in using them. I just took mine off last week and will probably sell them.
now you tell me |
Originally Posted by Mike Mills
(Post 11769667)
The advantage of them is this - they stop your foot from shooting off the front of the pedal and having the pedals serrated edges gouge the heck out of your achilles tendon area.
|
Can't stand clips. I want to be able to ride my bike whenever I want, under whatever terms I want, not have one narrow pair of shoes that I have to wear when I ride, and have to deal with fooling around trying to flip the pedal and get my feet in when I've only got 10 seconds to cross the intersection anyway. Especially when it's really hot out or you know you're gonna be walking around down-town, so you feel like wearing flip flops. Tried that for all of about 4 seconds once.
I might see it differently if I was one of the 'century on my day off' kind of people, but as it stands I'm a '30mi on my day off for relaxation and enjoyment' kind of person. Those clips are usually the First thing that come off of a bike when I get it. I have a box of them sitting in my spare parts area. |
Originally Posted by -holiday76
(Post 11770410)
now you tell me
|
Originally Posted by noglider
(Post 11768959)
I had a pair of these long ago. They were well liked, then. I wonder why they went out of production. Maybe we should urge V-O to make them.
I didn't find them comfortable. My arch would get bent around the edge. But hmm, maybe my toe clips were just too long back then. Aaron, I can't believe your feet are as big as mine! |
Originally Posted by 3speed
(Post 11770850)
Can't stand clips. I have a box of them sitting in my spare parts area.
I call first dibs! |
Originally Posted by Mike Mills
(Post 11771905)
I call first dibs!
|
I also tried the V-O half clips and wasn't crazy about them. This was on a 50+ mile ride back in April on mixed terrain. I figured I'd need to get on and off of the pedals pretty quickly but needed some foot retention. The half clips did allow those two things to happen, but they were no easier to get into and flip the pedals (MKS touring pedals) than regular clips, and I didn't like how uncomfortable they were unless my foot was perfectly centered in the clip. You can just make out the half clip in the lower right and upper left corners of this pic:
http://lh5.ggpht.com/_GmYBBzTzcVQ/S8...0/IMG_0085.JPG Of course, ymmv. Neal |
| All times are GMT -6. The time now is 10:33 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.