Where do you work on your bikes????
#27
Banned.
Joined: Dec 2007
Posts: 27,199
Likes: 1,463
#31
Senior Member

Joined: Nov 2009
Posts: 275
Likes: 2
From: Medina, OH
Bikes: 85 Cilo, '91 Bianchi Volpe, '00 Gary Fisher, '74 Raleigh SuperCourse, '06 Soma Groove, '09 Nashbar X
Primary shop where all the bicycle tools are located is in the basement. Cool in the summer, warm in winter, plus the fridge is right next to the workbench... After someone dragged a muddy MTB thru the kitchen, into the foyer and down the steps (very exciting afternoon
, amazing he survived that ) , we built one of those PVC 'Instructables' workstands to use in a decon station in the garage/driveway.
, amazing he survived that ) , we built one of those PVC 'Instructables' workstands to use in a decon station in the garage/driveway.
#32
Senior Member
Joined: Aug 2009
Posts: 3,473
Likes: 29
From: Madison, WI
Well, at this point I've pretty much taken over the spare room downstairs of our 2 bedroom apartment. It's so nice to finally have a nice warm room to just go work on bikes in. It's 12'x12', so nothing compared to some of you guys, but it works for me. I put my new tarantulas in there and basically turned it into my shop. Pretty soon I might have the official discussion with my girlfriend about it just becoming my guy room. I gotta wear her down a little more on this whole idea of having 5-10 bikes in what is currently the spare room, which was originally intended to be a guest room.
She's actually really good about it, though. I always have a couple bikes leaned up against the railing upstairs and she never says anything.
She's actually really good about it, though. I always have a couple bikes leaned up against the railing upstairs and she never says anything.
#33
aka Tom Reingold




Joined: Jan 2009
Posts: 44,345
Likes: 6,645
From: New York, NY, and High Falls, NY, USA
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
I usually have the radio on when I'm wrenching. I love it. Sometimes I connect my ipod to the boombox.
I guess I have to try some beer or wine. It might be nice.
I guess I have to try some beer or wine. It might be nice.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#34
Pandora; Prairie Home Companion or instant Netflix............
or maybe this...............
https://www.youtube.com/watch?v=5eCdIe0wdvU
#35
Senior Member

Joined: Nov 2008
Posts: 3,921
Likes: 334
From: New York Metro Area
Bikes: ,77 kabuki DT, '76 & '81 Fuji Americas, '87 Simoncini, '91 Fuji Saratoga, '99 Bianchi Alfana1 Fuji Royale, '83 Miyata Pro
Garage...basement...living room floor...kitchen table...den...driveway...coffee table (not alone)....anywhere and everywhere...I have even cleaned parts in the kitchen sink...I just do it neatly, and clean up after myself (plus a little extra cleaning thrown in) which explains why I am still alive and breathing
#36
Forum Moderator
Joined: Jul 2007
Posts: 23,014
Likes: 10,558
From: Kalamazoo
Almost all of my wrenching is done in the workshop that is in the rear of my garage. This winter I plan to move down into an freshly emptied area of the basement. 60F beats 20F for working on bikes.

__________________
Carbon: Fuji SL2.1 Di2.......Aluminum: Cannondale Synapse 105........Steel: Schwinn Circuit 853
...
Carbon: Fuji SL2.1 Di2.......Aluminum: Cannondale Synapse 105........Steel: Schwinn Circuit 853
...
#37
Senior Member
Joined: Jul 2009
Posts: 11,128
Likes: 39
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Uhmmm.. lets see,......
Garage, of course, The sidewalk in front of our house, The deck in the back, Living Room, Kitchen counter, Bathroom (for late night small parts disassembly cleaning/lubing)...and then of course, the bedroom!
I guess the question should have been "Where do you NOT work on your bike and parts"?? I wish I could d the same with my motorcycle!
Chombi
Garage, of course, The sidewalk in front of our house, The deck in the back, Living Room, Kitchen counter, Bathroom (for late night small parts disassembly cleaning/lubing)...and then of course, the bedroom!
I guess the question should have been "Where do you NOT work on your bike and parts"?? I wish I could d the same with my motorcycle!

Chombi
#38
Senior Member



Joined: Dec 2005
Posts: 18,842
Likes: 11,753
My basement is my bike workplace (plus woodshop plus laundry room plus lots of storage of all sorts of junk). It has about a 1,000 sq foot footprint, and I use about half of that for bike storage and wrenching (we don't have a garage). Access is via a bulkhead door to the backyard and an interior door down a narrow staircase from the kitchen. Several local BF-ers have bumped their heads getting in and out of my basement! I'm generally a fairly tidy person, but somehow the bike inner sanctum ends up to be fairly disheveled:




Neal




Neal
#40
Back in the saddle again
Joined: May 2009
Posts: 110
Likes: 0
From: Kingston ON
Bikes: GT Outpost, $100 MTB SS conversion, GT Gutterball
I tore down two bikes, and assembled one from the remains in my one bedroom apartment. Did some of the painting there, too, but I don't recommend that... I share the space with four bikes altogether. I live alone so there's no one to carp about the crowding
#41
Bianchi Goddess



Joined: Apr 2009
Posts: 28,980
Likes: 4,258
From: Shady Pines Retirement Fort Wayne, In
Bikes: Too many to list here check my signature.
well I was simply working in my hotel room or the area right outside hidden from the sun. however that job has come to an abrupt end so now I'll be working in my new rearranged "Bike and Entertaining" area.
I am seldom actually home, well was seldom home LOL, so I wanted my living room to be very functional and useful. I was going to wait until I was a bit better organized to post some pics but here goes.
this is the 'work area I have not setup the stand yet
I am seldom actually home, well was seldom home LOL, so I wanted my living room to be very functional and useful. I was going to wait until I was a bit better organized to post some pics but here goes.
this is the 'work area I have not setup the stand yet
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#42
I have a three-car detached garage with an alley entrance and no driveway; the third bay is now full of bikes, as seen in the photo below. This is not the actual workspace, however. The previous owners left behind a wooden workbench in the garage and another in the basement. I usually work outdoors on the brick patio, because I prefer the natural light. (No, not the Natural Light beer.) If it's after dark, which in Michigan in summer is 10:00, then I'm in the garage, and I sometimes pull a car or van out of the middle bay so I can use the workbench with elbow room. I don't have the room to work on a bike in the basement, partly because I have a winemaking corner next to the workbench, too. I'll need to create some space in there, clear the workbench so I can work indoors this winter too.
#43
i've got a typical improv basement workshop, but together on the cheap:



right behind me in the last picture is one of the best aspects of the workshop: one of those deep double-wide utility sinks with hot and cold water. it's my degreasing and parts scrubbing station!



right behind me in the last picture is one of the best aspects of the workshop: one of those deep double-wide utility sinks with hot and cold water. it's my degreasing and parts scrubbing station!
#44
I never drink on my own just for the heck of it but I get beers sometimes in exchange for wrench time, it's pretty sweet to work in bikes with a good buzz on.
#45
My basement is my bike workplace (plus woodshop plus laundry room plus lots of storage of all sorts of junk). It has about a 1,000 sq foot footprint, and I use about half of that for bike storage and wrenching (we don't have a garage). Access is via a bulkhead door to the backyard and an interior door down a narrow staircase from the kitchen. Several local BF-ers have bumped their heads getting in and out of my basement! I'm generally a fairly tidy person, but somehow the bike inner sanctum ends up to be fairly disheveled:
Neal
Neal
#46
curmudgineer
Joined: Dec 2009
Posts: 4,417
Likes: 113
From: Chicago SW burbs
Bikes: 2 many 2 fit here
Like Auchencrow, I prefer working outside weather permitting. I was doing just that last weekend, but this week, fall/winter weather seems to have finally caught up to Northern Coloradol. When necessary, I work in my 2 car heated garage (complete with stereo, sub-woofer & beer fridge). It's a real drag...
#48
Neal... I love your dungeon.
I have three shops to work in...
Mine - a double garage that is often full to the gills with bikes.

The frame shop where I apprentice...

And I still spend a good deal of time at he bike co-op volunteering and it's a nice place to go and tinker and socialize.
I have three shops to work in...
Mine - a double garage that is often full to the gills with bikes.
The frame shop where I apprentice...
And I still spend a good deal of time at he bike co-op volunteering and it's a nice place to go and tinker and socialize.
#49
Senior Member
Joined: Nov 2007
Posts: 4,599
Likes: 158
From: Santa Fe, NM
Bikes: Vassago Moosknuckle Ti 29+ XTR, 90's Merckx Corsa-01 9sp Record, PROJECT: 1954 Frejus SuperCorsa
I've moved around.... ALOT over the years, and have worked on my bikes in great workshops, basements, extra bedrooms, decks, porches, you name it.
I have a great old 1920's garage with a wonderful workshop in Salt Lake City (it's a rent house), but am relegated to setting up my stand in my living room or on my balcony in my small downtown apartment in Calgary, where I am working these days.
I have a great old 1920's garage with a wonderful workshop in Salt Lake City (it's a rent house), but am relegated to setting up my stand in my living room or on my balcony in my small downtown apartment in Calgary, where I am working these days.





