stem shim question
05-31-12 | 07:37 PM
#1
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 65
Likes: 0
From: Paoli, PA
Bikes: 2012 Singular Peregrine, 1976 Motobecane Grand Record, 1987 Schwinn Circuit, 1994 Cannondale M400
stem shim question
If you have a handlebar with a 25.4 diameter mount, do you get a stem with a 25.4 clamp, or do you use a stem with a 26.0 clamp with a shim?
How well do shims work on handlebars? Do they slip or stay pretty stable?
How well do shims work on handlebars? Do they slip or stay pretty stable?
06-01-12 | 07:26 AM
#2
Senior Member
Joined: Dec 2009
Posts: 8,343
Likes: 16
From: Louisville
For me, the stem is dependent on the top tube and handlebar in order to achieve the desired fit. If the handlebar happens to have a 25.4mm clamp section I'd prefer to have a stem with a 25.4mm clamp, but if I don't easily find one I have no qualms using a shim. The brand (group), angle and finish are all things I consider. I have used both the Nitto and VO shims and they work as advertised and are plenty stable. You do need to take care when installing them not to scratch the engraving on your fancy handlebar, though.
06-01-12 | 08:07 AM
#3
Socially Secure Cyclist
Joined: May 2011
Posts: 26
Likes: 0
From: Kankakee, IL USA
Bikes: 1988 Fuji Pulsar
A stem with a 25.4 clamp is preferred for 25.4 handlebars. I am using a Nitto Technomic quill stem (26.0 clamp) with my 1988 Fuji Pulsar's original handlebars (25.4). My shim is home-made from an empty solvent can (steel material). No slippage using the shim. Some use aluminum material from an empty pop can, but my choice is steel over aluminum. Whatever you choose, I see no reason to spend around $10 retail for a shim.
06-01-12 | 10:18 AM
#7
Senior Member
Joined: Jul 2009
Posts: 11,128
Likes: 39
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
I recently had to deal with a 25.4mm bar too when I was building up a project bike with a 1990's ITM stem that had a clamshell hinged type handlebar clamp. I was really surpised to find out that the stem required a 25.4mm bar when I could not get the Mavic 350 26mm bar to fit in it's hinged clamp. Do most ITM stems require a 25.4 bar?? I thought they were mostly 26mm clamps on them. If that is the case, switching over to an ITM stem might also be a good solution, instead of shimming your bar.
Chombi
Chombi
06-01-12 | 11:32 AM
#8
Bianchi Goddess
Joined: Apr 2009
Posts: 28,907
Likes: 4,152
From: Shady Pines Retirement Fort Wayne, In
Bikes: Too many to list here check my signature.
For me, the stem is dependent on the top tube and handlebar in order to achieve the desired fit. If the handlebar happens to have a 25.4mm clamp section I'd prefer to have a stem with a 25.4mm clamp, but if I don't easily find one I have no qualms using a shim. The brand (group), angle and finish are all things I consider. I have used both the Nitto and VO shims and they work as advertised and are plenty stable. You do need to take care when installing them not to scratch the engraving on your fancy handlebar, though.
I agree. I the stem is the right fit, and you can't find the same thing in 25.4 got a shim. But spend the money for one don't just use a few old beer cans.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
06-01-12 | 12:05 PM
#9
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 65
Likes: 0
From: Paoli, PA
Bikes: 2012 Singular Peregrine, 1976 Motobecane Grand Record, 1987 Schwinn Circuit, 1994 Cannondale M400
