WTB Legnano seat post clamp bolt
11-02-12 | 03:12 PM
#1
Thread Starter
Newbie
Joined: Nov 2012
Posts: 4
Likes: 0
WTB Legnano seat post clamp bolt
I have just acquired a Legnano frame, a Gran Premio, I believe. The seat post clamp bolt is missing.
Does anyone have one to sell, or can anyone provide pics on how to make one. Thanks
Does anyone have one to sell, or can anyone provide pics on how to make one. Thanks
11-02-12 | 03:23 PM
#3
WTB Legnano seat post clamp bolt
There are two different styles of Legnano under top tube seat post bolts. I am currently at work so I don't have access to my bike's pics.
Google around and I'm sure you'll find pics of both types.
Google around and I'm sure you'll find pics of both types.
__________________
Carbon: Fuji SL2.1 Di2.......Aluminum: Cannondale Synapse 105........Steel: Vintage Specialized Sirrus
...
Carbon: Fuji SL2.1 Di2.......Aluminum: Cannondale Synapse 105........Steel: Vintage Specialized Sirrus
...
11-02-12 | 03:30 PM
#4
Senior Member
Joined: Feb 2009
Posts: 1,344
Likes: 0
From: san leandro
Bikes: enough bikes to qualify for Hoarders......
Looks like the hardest part would be drilling the offset hole straight from end to end in a piece of aluminum rod of appropriate diameter, then cut into two pieces. Following that tap one side for threads and drill out the other to match the bolts shank.
Hope this is helpful
Hope this is helpful
11-02-12 | 05:23 PM
#5
Thread Starter
Newbie
Joined: Nov 2012
Posts: 4
Likes: 0
Legnano seat post clamp bolt
11-02-12 | 05:32 PM
#7
Senior Member
Joined: Jul 2009
Posts: 11,128
Likes: 39
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
I assume you're really looking for something similar to the wedge bolt and scalloped bushings on this stem that clamps down on the handlebar center sleeve in this case??:
If there's just a hole going through past your seat post.....
If that's the case, I'm nt sure if those are easy to find as they are not that common. As seemed to have been noted already, you might have to fabricate something similar from aluminum and steel bar stock and a bolt if you cannot find one for your bike.
Chombi
If there's just a hole going through past your seat post.....
If that's the case, I'm nt sure if those are easy to find as they are not that common. As seemed to have been noted already, you might have to fabricate something similar from aluminum and steel bar stock and a bolt if you cannot find one for your bike.
Chombi
