Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Which way to install brake pads?

Search
Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Which way to install brake pads?

Thread Tools
 
Search this Thread
 
Old 05-16-14 | 08:22 AM
  #1  
Thread Starter
Junior Member
 
Joined: Jul 2007
Posts: 145
Likes: 2
From: Pittsburgh, PA

Bikes: 1996 Marinoni Leggero, 1978 Bianchi Superleggera, 1972 Peugeot PX-10, 2007 Specialized Rockhopper

Which way to install brake pads?

Having the day off today and since it is raining I decided to finally replace the brake pads on my 70s Bianchi Superleggera. The calipers are Campagnolo super/nuovo record and I replaced the pads with salmon Kool-Stop pads.

After I completed the job I realized that my pads may not be properly installed. Although everything is working as it should, should the brake shoe be facing the other way? I mean so that during braking the pad will go up against the end of the shoe? The way it is now the pad will tend to come off the shoe, right?

Kinda hard to describe so please see the picture below. Do I have them backwards? Does the same apply for the front?

Please advise.

Thanks in advance

Attached Images
File Type: jpg
photo.jpg (37.1 KB, 81 views)
aggst1 is offline  
Reply
Old 05-16-14 | 08:28 AM
  #2  
Senior Member
20 Anniversary
 
Joined: Jun 2004
Posts: 363
Likes: 0

Bikes: Lynskey Helix, Serotta Fierta IT, Torelli, Raleigh Carbon Revenio 3.0

The closed end should be facing the front of the bike since the pad will be pushed that way during braking
bruin11 is offline  
Reply
Old 05-16-14 | 08:28 AM
  #3  
CroMo Mike's Avatar
All Campy All The Time
Titanium Club Membership
10 Anniversary
 
Joined: Nov 2013
Posts: 1,432
Likes: 124
From: Richmond, Virginia

Bikes: Listed in my signature.

The rear ones in the picture are correct. The front ones should be installed with the open end toward the fork.
__________________
My C&V Bikes:
1972 Bottecchia Professional, 1972 Legnano Olympiade Record,
1982 Colnago Super, 1987 Bottecchia Team C-Record,
1988 Pinarello Montello, 1990 Masi Nuova Strada Super Record,
1995 Bianchi Campione d'Italia, 1995 DeBernardi Thron









CroMo Mike is offline  
Reply
Old 05-16-14 | 08:29 AM
  #4  
Grand Bois's Avatar
Senior Member
 
Joined: Mar 2005
Posts: 17,392
Likes: 40
From: Pinole, CA, USA
Originally Posted by aggst1
The way it is now the pad will tend to come off the shoe, right?

No, not unless you roll it backwards and apply the brake.
Grand Bois is offline  
Reply
Old 05-16-14 | 08:34 AM
  #5  
Thread Starter
Junior Member
 
Joined: Jul 2007
Posts: 145
Likes: 2
From: Pittsburgh, PA

Bikes: 1996 Marinoni Leggero, 1978 Bianchi Superleggera, 1972 Peugeot PX-10, 2007 Specialized Rockhopper

Thanks guys... I guess next time I should think before I post... HA! I must have been thinking of going backwards...
aggst1 is offline  
Reply
Old 05-16-14 | 07:34 PM
  #6  
old's'cool's Avatar
curmudgineer
 
Joined: Dec 2009
Posts: 4,417
Likes: 113
From: Chicago SW burbs

Bikes: 2 many 2 fit here

If they're oriented incorrectly, you'll find out for sure the next time you have a panic stop...
old's'cool is offline  
Reply
Old 05-16-14 | 08:10 PM
  #7  
jimmuller's Avatar
What??? Only 2 wheels?
Titanium Club Membership
15 Anniversary
 
Joined: Apr 2010
Posts: 13,501
Likes: 995
From: Boston-ish, MA

Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10

I agree with the direction, but I've always questioned whether the pads can actually come out. The same pressure which holds the pad to the rim also holds the pad to the shoe. Has anyone ever seen this happen?
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
jimmuller is offline  
Reply
Old 05-16-14 | 09:26 PM
  #8  
CroMo Mike's Avatar
All Campy All The Time
Titanium Club Membership
10 Anniversary
 
Joined: Nov 2013
Posts: 1,432
Likes: 124
From: Richmond, Virginia

Bikes: Listed in my signature.

Can't say that I've ever seen it happen. I replaced some the other day and had to really work to get the old ones out and the new ones in.
__________________
My C&V Bikes:
1972 Bottecchia Professional, 1972 Legnano Olympiade Record,
1982 Colnago Super, 1987 Bottecchia Team C-Record,
1988 Pinarello Montello, 1990 Masi Nuova Strada Super Record,
1995 Bianchi Campione d'Italia, 1995 DeBernardi Thron









CroMo Mike is offline  
Reply
Old 05-17-14 | 06:35 AM
  #9  
wahoonc's Avatar
Membership Not Required
 
Joined: Jan 2005
Posts: 16,853
Likes: 18
From: On the road-USA

Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG

Originally Posted by jimmuller
I agree with the direction, but I've always questioned whether the pads can actually come out. The same pressure which holds the pad to the rim also holds the pad to the shoe. Has anyone ever seen this happen?
Yes on my Raleigh Sports... it was late at night after a double shift at work when I swapped the pads out, got 5 hours of sleep and headed off to work the next morning... first traffic light got exciting! It was a serious DOH! moment.

Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(

ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.

"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"
_Nicodemus

"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"
_krazygluon
wahoonc is offline  
Reply
Old 05-17-14 | 09:55 AM
  #10  
Grand Bois's Avatar
Senior Member
 
Joined: Mar 2005
Posts: 17,392
Likes: 40
From: Pinole, CA, USA
Originally Posted by jimmuller
I agree with the direction, but I've always questioned whether the pads can actually come out. The same pressure which holds the pad to the rim also holds the pad to the shoe. Has anyone ever seen this happen?
Try it and see what happens.

Wear a helmet.
Grand Bois is offline  
Reply
Old 05-17-14 | 10:55 AM
  #11  
jimmuller's Avatar
What??? Only 2 wheels?
Titanium Club Membership
15 Anniversary
 
Joined: Apr 2010
Posts: 13,501
Likes: 995
From: Boston-ish, MA

Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10

Originally Posted by Grand Bois
Try it and see what happens.

Wear a helmet.
I always wear a helmet but I will not try it.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
jimmuller is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Black Jaque
Bicycle Mechanics
0
04-01-13 03:23 PM
katy24
Classic & Vintage
9
10-26-11 06:46 PM
Ember
Bicycle Mechanics
4
09-10-11 12:24 PM
bikeee
Road Cycling
2
05-09-10 12:16 PM
tjspiel
Commuting
9
03-04-10 07:21 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.