Go Back  Bike Forums > Bike Forums > Commuting
Reload this Page >

Adjusting Powergrips

Notices
Commuting Bicycle commuting is easier than you think, before you know it, you'll be hooked. Learn the tips, hints, equipment, safety requirements for safely riding your bike to work.

Adjusting Powergrips

Old 04-02-08 | 07:40 AM
  #1  
mkoso's Avatar
Thread Starter
Version 2.0
 
Joined: Aug 2007
Posts: 42
Likes: 0
From: Connecticut
Adjusting Powergrips

After finally ditching the broken toe clips for a set of Powergrips I have a question for users of them. How do you go about adjusting them? I mean, I know, loosen the screw, adjust the strap but, how exactly do you do it.
The reason I'm asking is because I have one that feels great and the other I can't seem to get right no matter what I do. Is there a period of just getting used to the way they feel too?

Mark
mkoso is offline  
Reply
Old 04-02-08 | 08:14 AM
  #2  
Senior Member
 
Joined: May 2007
Posts: 519
Likes: 0
takes a while to get used to them. I've had my pair for almost a year now and still have trouble getting my foot into the right grip after coming to a stop. Of course it doesn't help that I just switched shoes. Totally changes the pressure points on my feet and it will take a while to break them into the new shoes.

What exactly about the other one doesn't feel great? Too tight, too loose? There's not a lot of adjustment that you can do to them. I bought the full pedal set and didn't do any adjustment to them at all. After a while they kind of mold to your foot/shoe and you don't even notice them anymore (until you have to put your foot back in).
bizzz111 is offline  
Reply
Old 04-02-08 | 08:21 AM
  #3  
markhr's Avatar
POWERCRANK addict
 
Joined: Mar 2005
Posts: 3,783
Likes: 0
From: North Acton, West London, UK
Originally Posted by bizzz111
...After a while they kind of mold to your foot/shoe and you don't even notice them anymore (until you have to put your foot back in).
+1

It also helps if you use exactly the same pair of shoes for every ride. If that's not possible then at least size them to the most regularly used pair.
__________________
shameless POWERCRANK plug
Recommended reading for all cyclists - Cyclecraft - Effective Cycling
Condor Cycles - quite possibly the best bike shop in London
Don't run red lights, wear a helmet, use hand signals, get some cycle lights(front and rear) and, FFS, don't run red lights!
markhr is offline  
Reply
Old 04-02-08 | 09:56 AM
  #4  
mtnwalker's Avatar
Senior Member
 
Joined: Dec 2006
Posts: 1,963
Likes: 7
From: Sunnyvale, CA

Bikes: '84 Centurion Accordo RS, '06 Gary Fisher Marlin, '06 Schwinn Fastback 27, '06 Litespeed Teramo

+1 on the same pair of shoes every ride or at least the same type. Meaning, running shoes, dress shoes, boots or whatever. I know this kinda defeats the purpose of being able to use different shoes on the bike.

But I guess what you could do is plan ahead of time and adjust the grips the day before for the shoes you are going to use. What I do then is place the shoe in the grips and adjust the straps. I just compensate for the size of the shoe when my feet are in them. This trick will get you close enough to the right adjustment.
mtnwalker is offline  
Reply
Old 04-02-08 | 12:42 PM
  #5  
mkoso's Avatar
Thread Starter
Version 2.0
 
Joined: Aug 2007
Posts: 42
Likes: 0
From: Connecticut
Thanks for responding to me. I have been using the same shoes when I ride so that shouldn't be an issue. It's really hard to explain but my right foot just doesn't feel like it's seated right in the strap. It's probably just something that'll break in.
Thanks again.
mkoso is offline  
Reply
Old 04-02-08 | 01:14 PM
  #6  
jyossarian's Avatar
SERENITY NOW!!!
20 Anniversary
 
Joined: Aug 2005
Posts: 8,739
Likes: 2
From: In the 212

Bikes: Haro Vector, IRO Rob Roy, Bianchi Veloce

I think I know what you mean. My left foot doesn't feel seated properly, usually because I push the strap forwards a few times trying to get my foot in. I don't get it all the way in, so the strap sits forward a bit and doesn't secure properly. Trying to get your foot secured while riding in traffic can be a PITA and it's why I have to feel around w/ my foot w/o looking at what I'm doing.
__________________
HHCMF - Take pride in your ability to amaze lesser mortals! - MikeR



We demand rigidly defined areas of doubt and uncertainty!
jyossarian is offline  
Reply
Old 04-02-08 | 01:21 PM
  #7  
mtnwalker's Avatar
Senior Member
 
Joined: Dec 2006
Posts: 1,963
Likes: 7
From: Sunnyvale, CA

Bikes: '84 Centurion Accordo RS, '06 Gary Fisher Marlin, '06 Schwinn Fastback 27, '06 Litespeed Teramo

Originally Posted by mkoso
Thanks for responding to me. I have been using the same shoes when I ride so that shouldn't be an issue. It's really hard to explain but my right foot just doesn't feel like it's seated right in the strap. It's probably just something that'll break in.
Thanks again.
I had the same issue too. I fixed it by taking measurements of the strap going through the tightening bolt. It worked well after that. I didn't realize 3 to 5 mm of length can make a big difference. BTW, the grips doesn't stretch that much if any.
mtnwalker is offline  
Reply
Old 04-02-08 | 05:35 PM
  #8  
Junior Member
 
Joined: Apr 2008
Posts: 14
Likes: 0
Funny you should mention this topic because I've been having exactly the same thoughts. In my case, I always wear the same shoes, but my right foot doesn't go in smoothly. The surface of the Power Grip that touches the left side of the instep on my right foot doesn't fold the same way as on the left foot. At first I thought it might be because I had adjusted the length differently on each side, but I checked and they're the same.

This isn't a big deal but it would be nice to fix it. The only alternative for people like me who are chicken to clip in is the King Grip (see https://www.rivbike.com/search/run?qu...product=14-053)
jlforrest is offline  
Reply
Old 04-02-08 | 05:56 PM
  #9  
Conservative Hippie
 
Joined: Mar 2005
Posts: 4,268
Likes: 0
From: Wakulla Co. FL
Check the angles of the metal pieces. I did a hard pedal strike with my left pedal one day and it took me three days to figure out I bent that one almost straight.
CommuterRun is offline  
Reply
Old 04-02-08 | 06:43 PM
  #10  
Junior Member
 
Joined: Aug 2006
Posts: 15
Likes: 0
From: Troy, NY

Bikes: Fuji Touring for commuting; Jamis Ventura for fun

I have the same problem, but it seems to be because the strap on one side gets beaten up from hitting the pavement until I can get my foot in after a stop. Its much looser than the other strap due to this and my foot does not feel as secure in the strap.
BurghBiker is offline  
Reply
Old 04-03-08 | 07:27 AM
  #11  
mkoso's Avatar
Thread Starter
Version 2.0
 
Joined: Aug 2007
Posts: 42
Likes: 0
From: Connecticut
Actually, I was riding home last night and I think I figured it out.

My right foot was hanging off the side of the pedal by about half the width of my foot. The hole where the back of the strap was attached was closer to the center of the pedal then the edge. What I wound up doing was taking the strap off and attaching it with the bolt that holds the cage to the pedal frame. This seems to have moved the strap over enough that I can more positively engage my foot and everything feels 100% better.

Thanks again for all the responses. It was nice to know that I wasn't the only one having issues.
mkoso is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.