Bringing doughnuts to the office. How?
#1
Thread Starter
Full Member


Joined: Jun 2007
Posts: 264
Likes: 53
From: Russell Township, Ohio, USA
Bikes: 1975 Paris Sport 700, 2007 Dahon Mu P8 (folding bicycle), 1984 Miyata 210, 2024 Tenways CGO600 Pro e-bike
Bringing doughnuts to the office. How?
A group of folks at my office put together what we call the breakfast club, with the agreement that each Friday, whoever's turn it is brings enough for everyone in the group. Usually it's bagels or doughnuts for a dozen people.
Since I've been commuting pretty steadily by bicycle, I'd like to find a way to bring 2 dozen doughnuts when it's my turn, but I'm thinking it'll be hard to prevent the frosting from smearing off and fresh raised doughnuts from being smashed.
One wag at the office suggested stringing the holes over my handlebars
. Of course, my handlebars aren't long enough for that.
Has anybody done this successfully? I'm looking for suggestions and I'd rather not have to resort to driving the car.
Since I've been commuting pretty steadily by bicycle, I'd like to find a way to bring 2 dozen doughnuts when it's my turn, but I'm thinking it'll be hard to prevent the frosting from smearing off and fresh raised doughnuts from being smashed.
One wag at the office suggested stringing the holes over my handlebars
. Of course, my handlebars aren't long enough for that.Has anybody done this successfully? I'm looking for suggestions and I'd rather not have to resort to driving the car.
__________________
If something doesn't ache, I could be trying harder.
If something doesn't ache, I could be trying harder.
#4
What, me hurry?
Joined: Jul 2005
Posts: 235
Likes: 0
From: Boston, MA
Bikes: Rivendell Atlantis, 1987 Peugeot Iseran mixte
Grocery panniers, no problem.
#6
I got a cut off milk crate on my front rack you could do something similar with a bread crate as was said they are wider.
Pic of my dealhttps://flickr.com/photos/econnofoot/...15760630793460
Pic of my dealhttps://flickr.com/photos/econnofoot/...15760630793460
#9
Senior Member
Joined: Oct 2008
Posts: 463
Likes: 0
From: Marysville, WA
Bikes: Trek Portland/Gary Fisher Hoo Koo E Koo/LeMond Versailles
At the nudist colony the most popular guy is the one who can serve a dozen donuts while carrying a pot of coffee in each hand. If you need to keep both hands on the handlebars that may be somewhat applicable.
I also seem to recall something about the most popular gal being the one who can eat the last donut, but I don't know what that means.
I also seem to recall something about the most popular gal being the one who can eat the last donut, but I don't know what that means.
#11
The space coyote lied.



Joined: Sep 2008
Posts: 48,684
Likes: 10,955
From: dusk 'til dawn.
Bikes: everywhere
The Krispy Kreme near me has coffee for a nickel, so I've been going donut crazy lately. First time back to the shop with a dozen, the bungee did dig in to the box a bit and mildly injure some donuts. So I cut a plank of thin plywood the size of the donut box, brought it with me the next morning and laid it atop the box before strapping it to the trailer. Worked like a charm.
If you're using a rack, you could cut two plywood pieces, affix one to the rack with a couple nut and bolt sets and use the other sheet for atop the donut boxes.
If you're using a rack, you could cut two plywood pieces, affix one to the rack with a couple nut and bolt sets and use the other sheet for atop the donut boxes.
#12
Senior Member
Joined: May 2006
Posts: 1,766
Likes: 0
From: North of the 49th Parallel (GPS grid soon)
Bikes: MTB Peugoet Canyon (forgot the model), Nikishi? roadbike, MTB custom build,
To the OP,
MY thinking right away is to build something of a donut holder out of plexi-glass. It's reuseable, less waste (then having a large cardboard box), and you can build you your custom sizing.
This idea just came to mind after a little expeirence with plexiglass from my bike light building. At Home Depot you can get that plexiglass in various thicknesses. I've used 1/16in but it may be a bit too thin for your uses. 1-2 sizes up would work but would need longer scoring with a knife or just use a saw/dremel tool. My thinking for you is to build something like a little drawer container. That way when you buy your donuts request to have them all in the little paper sleeves. This way the donuts won't stick to the box you've made and cleaner. You will measure the size of a normal dounut and give say 1-2 cm extra space then cut your pieces out then use clear silicone (smallest tube will work well) to bind the box together. Give a day to air out and you're good to use that as a carrier inside a backpack/pannier/ backrack.
|=====|
| |
|=====|
| |
|=====|
| |
|=====|
A donut is about ~1-1.25 inches thick. If your donuts are larger then that message me your store because I want some.
I've not measured my donuts but going on memory. My only donuts for reference are from Tim Hortons.
Built your boxes like the drawing above. It can't get much clearer then that. Most basic supplies are:
1. Plexiglass
2. Clear silicone (white works as well but clear looks better to the eye and most people)
3. 2 sheets of sandpaper. One very gritty thne other fine.
That's it. You just buy your donuts, then put fold the paper sleeve over to keep the donut fresh then insert into it's slot in the box. Make a few of them so you can stack them up narrow in a backpack or pannier and not worry about crushing them. If you're handy with electronics or just get a simple cheap LED driver off www.Dealextreme.com and a LED and make it a flashing donut station which people would probably like the lighting and take away from the often smirking comments when people make DIY solutions.
Damn... this idea has got me thinking of making one now.
MY thinking right away is to build something of a donut holder out of plexi-glass. It's reuseable, less waste (then having a large cardboard box), and you can build you your custom sizing.
This idea just came to mind after a little expeirence with plexiglass from my bike light building. At Home Depot you can get that plexiglass in various thicknesses. I've used 1/16in but it may be a bit too thin for your uses. 1-2 sizes up would work but would need longer scoring with a knife or just use a saw/dremel tool. My thinking for you is to build something like a little drawer container. That way when you buy your donuts request to have them all in the little paper sleeves. This way the donuts won't stick to the box you've made and cleaner. You will measure the size of a normal dounut and give say 1-2 cm extra space then cut your pieces out then use clear silicone (smallest tube will work well) to bind the box together. Give a day to air out and you're good to use that as a carrier inside a backpack/pannier/ backrack.
|=====|
| |
|=====|
| |
|=====|
| |
|=====|
A donut is about ~1-1.25 inches thick. If your donuts are larger then that message me your store because I want some.
I've not measured my donuts but going on memory. My only donuts for reference are from Tim Hortons.Built your boxes like the drawing above. It can't get much clearer then that. Most basic supplies are:
1. Plexiglass
2. Clear silicone (white works as well but clear looks better to the eye and most people)
3. 2 sheets of sandpaper. One very gritty thne other fine.
That's it. You just buy your donuts, then put fold the paper sleeve over to keep the donut fresh then insert into it's slot in the box. Make a few of them so you can stack them up narrow in a backpack or pannier and not worry about crushing them. If you're handy with electronics or just get a simple cheap LED driver off www.Dealextreme.com and a LED and make it a flashing donut station which people would probably like the lighting and take away from the often smirking comments when people make DIY solutions.
Damn... this idea has got me thinking of making one now.
#13
Senior Member
Joined: May 2006
Posts: 1,766
Likes: 0
From: North of the 49th Parallel (GPS grid soon)
Bikes: MTB Peugoet Canyon (forgot the model), Nikishi? roadbike, MTB custom build,
You can get mini hinges at Home Depot as well and screw in a plastic flap on top to make it look better. Just a thought.
#14
Senior Member
Joined: May 2006
Posts: 1,766
Likes: 0
From: North of the 49th Parallel (GPS grid soon)
Bikes: MTB Peugoet Canyon (forgot the model), Nikishi? roadbike, MTB custom build,
|=====|
| |
|.........|
| |
|.........|
| |
|=====|
Hope this diagram comes out clearer.
| |
|.........|
| |
|.........|
| |
|=====|
Hope this diagram comes out clearer.
#15
Great design, but you might want to rethink the material. If you crash--or just drop the bike while parking--it seems like you're going to have shattered glass everywhere. A tire puncture is probably the best outcome of that scenario.
__________________








"Think Outside the Cage"
#17
Senior Member

Joined: Jul 2002
Posts: 40,863
Likes: 3,115
From: Sacramento, California, USA
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
I am such a geek. When I had to bring a birthday cake to the office, I just had the bakery tie up the box with string and held it in my left hand. I only rode less than a mile but it really wasn't that big a deal to ride one-handed. Just go slow and take a less busy route if possible.
#19
It's easy being green.
Joined: Jun 2008
Posts: 932
Likes: 0
From: in the desert
Bikes: Trek Beach Cruiser, Sun X-2 AX (bent)
Get the box of doughnuts put in a plastic/ handle-type bag. Hang the bag over your handlebars. I carry chips, eggs, and bread this way all the time.
#20
Senior Member
Joined: May 2007
Posts: 670
Likes: 0
From: Jacksonville, Florida
Bikes: Bianchi Axis (commuter), Specialized Tricross S-Works, BMC Team Machine SLT01, Mercier Kilo TT
You could also get one of those hard plastic rubbermaid storage containers with the lid, put the box of bagels/donuts in there, and strap it down to your rack. Would prevent them from getting smashed.
#21
A group of folks at my office put together what we call the breakfast club, with the agreement that each Friday, whoever's turn it is brings enough for everyone in the group. Usually it's bagels or doughnuts for a dozen people.
Since I've been commuting pretty steadily by bicycle, I'd like to find a way to bring 2 dozen doughnuts when it's my turn, but I'm thinking it'll be hard to prevent the frosting from smearing off and fresh raised doughnuts from being smashed.
One wag at the office suggested stringing the holes over my handlebars
. Of course, my handlebars aren't long enough for that.
Has anybody done this successfully? I'm looking for suggestions and I'd rather not have to resort to driving the car.
Since I've been commuting pretty steadily by bicycle, I'd like to find a way to bring 2 dozen doughnuts when it's my turn, but I'm thinking it'll be hard to prevent the frosting from smearing off and fresh raised doughnuts from being smashed.
One wag at the office suggested stringing the holes over my handlebars
. Of course, my handlebars aren't long enough for that.Has anybody done this successfully? I'm looking for suggestions and I'd rather not have to resort to driving the car.
#23
What is this demonry?!
Joined: Oct 2004
Posts: 1,097
Likes: 0
From: Central IL
Bikes: KHS Aero Comp.
I was successful in carrying a pumpkin pie over the course of 5 miles at 20mph+ by simple strapping it to the flat portion of my rack with some bungee cords. There was one bump where it hit the top of the container but it wasn't a large hit and the pie was still in tact.
oh and for the love of at least my stomach, don't eat dohnuts for breakfast. Reading the title just made me gag a little. Get some whole wheat/grain (whichever you prefer) bagels, they taste so much better especially if you get them fresh.
oh and for the love of at least my stomach, don't eat dohnuts for breakfast. Reading the title just made me gag a little. Get some whole wheat/grain (whichever you prefer) bagels, they taste so much better especially if you get them fresh.
#25
Senior Member
Joined: May 2007
Posts: 3,878
Likes: 1
From: Boston (sort of)
Bikes: 1 road, 1 Urban Assault Vehicle
Ride to work. Walk down the street to the donut shop. Acquire donuts.
(or, y'know, spend $50-$200 on some rack/luggage combo to do the same thing...up to you)
(or, y'know, spend $50-$200 on some rack/luggage combo to do the same thing...up to you)




