100% of my bikes are yellow!

Here is my new commuter. I sure do like it.

Here are some pics of my recently completed Salsa Casseroll. I bought the frame from Jenson when it was on sale for $289.

Side view:
http://farm3.static.flickr.com/2244/...8ce6cd.jpg?v=0

Cockpit:
http://farm3.static.flickr.com/2366/...6d2f7e.jpg?v=0

Crank side:
http://farm3.static.flickr.com/2039/...64b116.jpg?v=0

Rear:
http://farm3.static.flickr.com/2372/...151fe0.jpg?v=0


Build list:
Frame/Fork: Salsa Casseroll, 60cm
Pedals: Shimano SPD A-520
Handlebars: Bontrager Race Lite 44cm (from my Trek 5200)
Bar Tape: Fizik Microtex
Headset: Cane Creek S-8
Stem: Cannondale 110mm (from e-bay)
Wheelset: Open Pro / Ultegra hubs with Wheelsmith DB spokes
Crankset: Campy Ultra Torque Centuar CT (compact 50/34)
Chain: SRAM PC971
Rear Der: Shimano XT med. cage
Front Der: Shimano 105
Shifters: Shimano Dura Ace bar-ends, 9-speed
Brakes: Tektro R556 with Kool Stop pads
Brake levers: Tektro R200
Seatpost: Thomson Elite
Saddle: Brooks B-17
Fenders: SKS P35
Water bottle cages: King
Cassette: Shimano 105 13-25T
Bag: Carradice Barley
Tires: Michelin Carbon 23c right now, switching to Panaracer Pasela 32c soon.

Beautiful setup. I love the bag.

I love this bike. It reminds me of a far less ghetto version of my own.

that bike would be amazing with drop handlebars.

what is with the pad on the top tube? I've seen it on a lot of flat-bar fixed-gears.

yes! southside it is. right near the southwall and the tracks.

the pad on the top tube is just a top tube pad. alot of people use it for the looks, but i use it so when i lock up, to the post/pole etc. it doesnt scratch up my frame.

Well after much thought and consideration, I have decided to cut down to one bike. So my mountain bike that used to look like this:

http://i194.photobucket.com/albums/z...r/100_3871.jpg

now has been put into full use as a commuter and looks like this:

http://i194.photobucket.com/albums/z...r/100_3879.jpg
http://i194.photobucket.com/albums/z...r/100_3881.jpg

Oh and fenders are on their way so then the whole setup will be complete. May be getting some barends if I can find some I like. Been looking at the cane creek ergo ends that come on a few of the treks

"The Sun" - Birmingham-made frame with 700C wheels and internal 8
 

Some fantastic bikes out there! More originality in setup than the lion's share of the road and mountain bikes pictured in other forums. Fixed gears? Well, they're a breed apart...
Here's my (admittedly filthy) commuter:
Same setup (saddle height, reach and drop) as my racing bikes. Roughly 50 year old frame: "The Sun", made in Birmingham with original decals, gold pinstriping, brass head badge, and oil ported BB. Original BSA crank. Custom 700C wheels with black alexrims laced to sealed hub up front and Shimano Nexus internal 8spd (also sealed) in rear replacing the 27s. Schwalbe 700 x 30c Marathon tires - flat proof, grippy, and fast - can you tell that I like them? Gripshift on riser bars. Old school Gran Compe stem with triangular profile. Selle Italia SLR gel saddle. Lowrider front rack (rear rack would spoil the lines, IMHO) with gray/black Ortlieb paniers. Lots of reflective decals on old aluminum fenders and frame. The whole thing must weigh about 40 lbs but it's fast, stable, and comfortable. Irreplaceable, but stealth enough that nobody's tried to steal it...
Should anyone know about "The Sun" bikes, please email me!

Kona smoke 06 haven't commuted on her yet as im on hols, but will be taking her around some bike tracks and rail trails over the next week or so


http://farm3.static.flickr.com/2285/...3e18249e_b.jpg
http://farm3.static.flickr.com/2023/...34bf1742_b.jpg

that kona is sweet. I love the black,
what size tires are on that?

26 1.5 city slickers.. pretty smooth actually

Hey, how did you get a rack to fit on your Smoke? I have one too, but the fenders have this weird hookup I couldn't fit a proper rack to

http://i6.photobucket.com/albums/y24...e/DSCF7370.jpg

so I have to use a seatpost one instead

http://i6.photobucket.com/albums/y24...e/DSCF7365.jpg

http://i6.photobucket.com/albums/y24...e/DSCF7369.jpg

Actually since those pictures (from my last post) last summer in Vancouver I've used my Smoke in a Regina winter:

http://farm3.static.flickr.com/2316/...72e903df_o.jpg

I've never really biked in the winter before, and even in the summer Regina isn't exactly the best place to commute, but I was told lowering the seat (to lower your centre of gravity) and deflating the tires (to increase traction surface area) can be helpful. I was actually surprised how stable it was, especially at stops where I'd put my foot down and my leg would slide right out, though the bike held firm.

Corners are kind of scary though, especially coming off a mostly-clear main road onto a snowed-over side (residential) one - drivers don't seem to realise bikes have to slow to a crawl to make the corners without sliding out. Also, you end up riding in the ruts in the road, where there's more bare road for traction - drivers didn't seem to understand that I couldn't just ride on the edge where it was all slippery.

http://farm3.static.flickr.com/2257/...c080f9b0_o.jpg

Proper studded tires would've been helpful, but as long as the roads are clear of high snow and not totally iced over, it's manageable with regular slicks. Disc brakes would be nice too, in case your rims get caked with ice and make rim brakes useless.

Wrong! At least for me. I have short legs and a long torso, making a stem riser a necessity for proper fit.

08' Diamondback Insight 1

My Commuter Ride
 

Well, here it is. I just lowered the handlebar an inch (2 spacers), and I want to get a bigger headlight. I hit the Scott Pierson Trail last night in the rain to find out that it is not lit. My little light did fine, but I think it needs a bit of help :o

http://lh5.google.co.uk/simon.quantr...JPG?imgmax=800

http://lh5.google.co.uk/simon.quantr...JPG?imgmax=800

My winter bike, the Orange Menace:

http://img.photobucket.com/albums/v6...0/bikes004.jpg

Summer bike (now has the Brooks when it not on my winter bike).

http://img.photobucket.com/albums/v6...reBikes007.jpg

http://img.photobucket.com/albums/v6...reBikes012.jpg

My Bridgestone XO-1:

http://kentuckybicycling.com/wp-cont...overall460.jpg

Top Tube Preservation
 

They keep the top tube prestine, the same reasoning that applies to putting a plastic cover over a newly purchased couch. Except trendier. One might question the purpose of keeping the top tube prestine by covering with a pad if the top tube is never seen due to it being covered by a pad. A conundrum to be sure. I imagine that groups of fixed-gear fanatics get together in covered garages under low UV light and gently remove the top tube pads and admire that beauty that is their top tube for a brief moment before the light begins to break down the paint (30 second window, I think). At which point the pad is quickly restored.

:)

Except that nobody worries about denting a couch. Some handlebars favored by fixed riders will poke right into the top tube. If dent-free counts as "pristine", then that's a good enough reason.

You're right there, with a couch it's more about the grape juice issue. BTW, handlebars that pierce your top tube should get a darwin award, this seems to be an unsafe practice. I am doubting that the pad would make much difference there.

So as to not go too off topic here, I ride a couple year-old poprad that has little left of stock componants, and a dahon speed pro. I have no pictures. I'll try and "spell check" from now on.

It would make even less difference with that flat-bar fixie/SS because its bars won't touch the top tube at all (which I only realized after I wrote my post and saw the pic again.. lol).

I almost bought a Dahon Mu XL off of Craigslist; I only held back because I'm still enamored by the Tikit and its crazy-fast fold. I'm still sure that I'll get a folder someday.

The Dahon MU XL looks to be quite a tasty ride, probably a little more practical for commuting than the speed pro and its skinny weakish tires. Love BF and the tikit looks very nice, that would be a tough choice.

Let's start putting top tube pads on folders as well, we can think of a reason later.

Top tube pads on ALL bikes, just like on my BMX when I was a kid!

I'll have to re-route my rear brake cable to do that... Oh, heck, I'll just cut the cable. The style points will only improve my stopping power! :p

I must be tired cause that actually sounded funny to me when I wrote it

it just fitted right on i mounted the rack attchement points and the fender ones on the same hole.....

nice looking bike btw

I don't own a fixed-gear bike and I have never ridden one .... I have, however, gone on youtube and watched video of folks riding fixies. Very interesting the way the hardcore, "I've got no brakes but can pedal backwards" fixie rider stops ... the rider leans waaaayyyy foward, down on the handlebars and top tube, locking their legs and sliding to a stop.

I think if this was my idea of fun, I would certainly invest in a pad for the top tube .... probably the stem, too ... and it wouldn't be paint I was thinking about. :D

I've been commuting on the Kona Kilauea since I bought it new in '94. I added the Motobecane Le Champion to the mix in '02 for the nicer weather days. I always switch my lights and QR seatpost rack to whichever bike I decide to ride that day. I'm building up an old Fuji FG, so maybe I'll finally put some fenders and a real rack on something. http://i119.photobucket.com/albums/o.../Bike/Kona.jpghttp://i119.photobucket.com/albums/o...LeChampion.jpg