16 mile one way commute, need advice
05-20-09, 11:08 AM
#26
No Shirt No Shoes NO DICE
Join Date: Jul 2007
Location: the Southland
Posts: 61
Bikes: 2005 Giant OCR2, 1995 Raleigh M80, 2006 Electra Coaster, 2008 Novara Buzz V
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This is a more elegant solution than P-clamps:
https://www.amazon.com/Sunlite-Bicycl...2836362&sr=8-1
I just got one of these and it works great! Just measure your seat tube to make sure you get the right size. My frame is aluminum and I needed the larger one.
https://www.amazon.com/Sunlite-Bicycl...2836362&sr=8-1
I just got one of these and it works great! Just measure your seat tube to make sure you get the right size. My frame is aluminum and I needed the larger one.
05-20-09, 01:24 PM
#27
Enjoy
Join Date: Nov 2003
Location: Seattle metro
Posts: 6,165
Bikes: Trek 5200
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
To the OP. The 2008 Trek Portland is an outstanding commuter bike. Light and smooth rode. The disc brakes tend to warp and need constant babysitting. You' may need full fenders also. Other than that, it's a great bike.
05-20-09, 01:41 PM
#28
triathlete? roadie? MTB?
Join Date: Oct 2008
Location: Bellevue, NE
Posts: 384
Bikes: Cannondale Slice One tri bike, Cannondale F300 Hardtail MTB, Bianchi Giro roadie
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Like a couple have said, try cutting down on what you carry. Leave the shoes and belt at work, maybe, or some other things that you can leave there. Leave as much as possible at work, and carry only the essentials in.
I also do a 16 mile each way commute over hilly terrain, and I get by with a backpack. I understand everyone's circumstances are unique, but there is probably a way to cut down on what you have to carry.
I also do a 16 mile each way commute over hilly terrain, and I get by with a backpack. I understand everyone's circumstances are unique, but there is probably a way to cut down on what you have to carry.
05-20-09, 02:07 PM
#29
Senior Member
Join Date: Feb 2007
Posts: 1,157
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Sounds like I would keep & use the bike I already had. For additional support for a seatpost rack, you can go to a hardware store & get some angle iron, about 3/4" x 3/4 " that has round or elongated holes in it. Cut & fit one end under the side " lip " of the rack using stove bolts, & the other end can fasten by opening up the end, where it looks like a " U " & slip it behind the wheel nuts/skewer. You can then add panniers, baskets, to the rear. Hope I described it good enough.
05-20-09, 02:14 PM
#30
Squeaky Wheel
Personally, I don't mind loading my work clothes/shoes/towel in my trunk bag/panniers every day. It's one less thing to think about (now what's at work and what's at home again?), and I view the extra weight as a training aid...
05-20-09, 02:18 PM
#31
Portland Fred
The problem with seatpost racks is that unless you have a sloping top tube, they ride up quite high under the seat and leave little room for your stuff. Mine broke after about a year, probably because I had to mount the load so far back to clear the seat that it suffered excess stress from the leverage.
OP, backpacks suck in the wind. Learn how to travel light, get a used cyclocross bike that will take a rack and mount racing tires on it. You'll be plenty fast.
05-20-09, 02:29 PM
#32
Senior Member
Topeak has a seatpost mountable rack. Roll your stuff into a bag or something, and put it on the back. You're done 
This way you'd save yourself a ton of money, and you get to keep your trusty Jamis.
This way you'd save yourself a ton of money, and you get to keep your trusty Jamis.
05-20-09, 11:17 PM
#34
Senior Member
I bought a topeak seatpost rack and matching trunk bag in 1999 and I still use it every day on my commuter. Works well for me. My current bike has a carbon fiber seatpost and the rack has never damaged it. I keep the clamp tight on the seatpost and don't have any problems with the rack sliding from side to side. Since it only takes a few seconds to put on and take off, I leave the rack at home on my weekend rides.
05-21-09, 06:18 PM
#35
Senior Member
Join Date: Nov 2006
Location: Pittsfield, MA
Posts: 633
Bikes: Motobecane Fantom Cross 2008 Schwinn Super Sport 1972 SS. Surly Pacer Rando bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I have no racks on my Raleigh, which was my primary commuter for a couple of years. I bought a seat post rack and a small pannier from Performance. It was exactly what I needed to carry my clothes, minus shoes to work. I left shoes there. Now I have a cross bike, with a big rack. I can carry anything.
05-24-09, 10:34 PM
#36
Member
Thread Starter
Join Date: Jul 2008
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Update from the OP
I discussed all of what I learned here with my wife. Big mistake. Thanks to all the posts showing me how I could use my current bikes, my $2000 budget got usurped by the house painting and new garage doors budget.
I am now going to try one of 2 options. First, I took an old set of mavic classic elite roadie rims and put some 25's on the front of my Trek 7300 but had to stick with the current rims for the back due to drop out spacing of 135mm. I put 28's on the back. I ripped off the riser bar and heavy adjustable stem and but a mountain bike stem and light weight bar on the trek. I changed out the seatpost and heavy seat for lighter left overs from my parts bin. Also, I took off the pedals with cages and replaced with some SPD clipless pedals I took off one of my mountain bikes. All together I may have dropped a few pounds from the pig and decreased rolling resistance with skinny tires. I will try a commute to work on tuesday. No money spent so far on this, just using parts from other bikes I have.
If I don't notice a significant increase in speed I will have to go with one of the options for mounting a rack to the Jamis. Thanks again to everyone although I shouldn't have shared the info with my wife
I discussed all of what I learned here with my wife. Big mistake. Thanks to all the posts showing me how I could use my current bikes, my $2000 budget got usurped by the house painting and new garage doors budget.
I am now going to try one of 2 options. First, I took an old set of mavic classic elite roadie rims and put some 25's on the front of my Trek 7300 but had to stick with the current rims for the back due to drop out spacing of 135mm. I put 28's on the back. I ripped off the riser bar and heavy adjustable stem and but a mountain bike stem and light weight bar on the trek. I changed out the seatpost and heavy seat for lighter left overs from my parts bin. Also, I took off the pedals with cages and replaced with some SPD clipless pedals I took off one of my mountain bikes. All together I may have dropped a few pounds from the pig and decreased rolling resistance with skinny tires. I will try a commute to work on tuesday. No money spent so far on this, just using parts from other bikes I have.
If I don't notice a significant increase in speed I will have to go with one of the options for mounting a rack to the Jamis. Thanks again to everyone although I shouldn't have shared the info with my wife
05-26-09, 07:27 AM
#37
********
Join Date: Jun 2007
Posts: 159
Bikes: Bianchi, Trek, Another Trek, Raleigh, Fuji and Santana and another Santana
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I do 19 miles each way on a Salsa Casseroll. Stock 105 build. I've added a rack and Dinotte 400's front and back. Ride 28mm Conti Gatorskins at 120 PSI. It is a comfortable, well mannered ride, and deals well with the sketchier bits of my route. I dream of something lighter though.
