How nice is your floor pump?
#1
Thread Starter
Senior Member


Joined: Jan 2008
Posts: 15,106
Likes: 4,763
From: Beaverton, OR
Bikes: Yes
How nice is your floor pump?
I've decided it's time to start keeping a floor pump at work. I've got a cheapo Hurricane pump right now. It's not fancy, but it works with either valve type and the guage is only off by about 5 psi. I'm trying to decide whether to just get another cheap pump or spring for something nice and move this one to the office.
So, what kind of floor pump do you use and what do you think of it?
So, what kind of floor pump do you use and what do you think of it?
Last edited by Andy_K; 05-08-10 at 01:20 AM.
#3
Senior Member

Joined: Jul 2002
Posts: 40,863
Likes: 3,116
From: Sacramento, California, USA
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Pretty nice, I think. It's a Specialized Air Tool. I like that it has a metal tube. $35 I think.
#4
Senior Member
Joined: Nov 2008
Posts: 314
Likes: 0
From: Sherman Oaks, CA
Bikes: Specialized Crossroads Elite, Specialized Trcross Comp
#6
Plays in traffic
Joined: May 2006
Posts: 6,971
Likes: 16
From: Rochester, NY
Bikes: 1996 Litespeed Classic, 2006 Trek Portland, 2013 Ribble Winter/Audax, 2016 Giant Talon 4
I bought mine over four years ago with my first bike. It's a Giant and has a gauge at the top of the main tube and one of those automatic presta/schraeder heads. No leaks, always works, I think it was around $30 or $35. Only complaint is that the hose hanger doesn't hold the hose tightly.
#7
Mind if I ask why you need a pump at work? How often do you put air in your tires? I'm finding once a week is more than enough for me...
#8
I had a Joe Blow for about 10 years until the rubber hose somehow dried out and cracked. I don't think the gauge was terribly accurate, though; measured way low. Now I have a Lezyne that seems really nice, and the gauge seems to be much better. It was something like $60 though.
#9
Senior Member
Joined: Dec 2009
Posts: 903
Likes: 1
From: Rochester, NY
Bikes: 2010 Kona Dr. Dew, Moose Bicycle XXL (fat bike), Yuba Mundo V3
An Avenir Airsource something-or-other. It has a pressure dial and a universal head. Works well enough up to 85 psi or so. I haven't tried higher.
#10
Thread Starter
Senior Member


Joined: Jan 2008
Posts: 15,106
Likes: 4,763
From: Beaverton, OR
Bikes: Yes
It happens often enough that it would be nice to just walk back to my desk and get a good pump.
#12
The space coyote lied.



Joined: Sep 2008
Posts: 48,866
Likes: 11,056
From: dusk 'til dawn.
Bikes: everywhere
I need to get a floor pump at work also, as I frequently have a couple or three bikes at work and a couple or three at home, never know what's gonna happen.
My home pump is REALLY nice except for the handle - it's a plastic handled Silca. Got it on super sale for $10 in 1995 or so. Only took about 3 years to get used to the handle. I'd likely go with another Silca.
My home pump is REALLY nice except for the handle - it's a plastic handled Silca. Got it on super sale for $10 in 1995 or so. Only took about 3 years to get used to the handle. I'd likely go with another Silca.
#13
Not safe for work


Joined: Feb 2007
Posts: 2,123
Likes: 8
From: Toronto, Ontario, Canada
Bikes: KHS Town and Country 100 & Jamis Durango Femme 1.0
#14
Señior Member
Joined: Sep 2005
Posts: 13,748
Likes: 10
From: Michigan
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
I've got a $13 plastic floor pump that I bought at a department store. I've used the hell out if it, and even take it on vacation, tossing it into the cargo trailer where it crashes around with propane tanks and other crap, and I've pumped up car tires with it when back in the woods. It works perfectly well.
The gauge on it seems to be pretty accurate, it reads the same as both of my digital gauges.
The gauge on it seems to be pretty accurate, it reads the same as both of my digital gauges.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#16
genec
Joined: Sep 2004
Posts: 27,072
Likes: 4,533
From: West Coast
Bikes: custom built, sannino, beachbike, giant trance x2
I used to use my SCUBA tanks, but the floor pump is lighter and easier to move about.
#17
I am a caffine girl
Joined: Nov 2009
Posts: 1,815
Likes: 1
From: Bay Area
Bikes: 2012 Stumpjumper FSR Comp...2010 Scott CR1 CF...2007 Novara FS Float2.0...2009 Specialized Hardrock Disc...2009 Schwinn Le Tour GSr
I have a Serfa and a Joe blow sport. There's been time where I had to pump 5 bikes for my nephew, their friends, my SO and my bike just before heading out on a group ride. Got tired of pumping those tires and found the best pump so far after a search mission in the old garage. I found my old battery operated pump for my car tires and now I use that most of the time. I use a adapter for my Presta valve. Several nice thing about this pump is that the valve lever is opposite of standard bike pump and I don't lose any air locking the valve head or removing it. It has a built in light which is nice at time. It also can jump start my car battery on morning where I find a flat tube and is in a rush to get out of the house and where I am lazy to transfer my stuff to the other bike 
Question: Why is that car tire pumps have the lever pushing down to lock while bicycle pumps are the opposite? What is the idea behind that?

Question: Why is that car tire pumps have the lever pushing down to lock while bicycle pumps are the opposite? What is the idea behind that?
Last edited by colleen c; 05-08-10 at 12:05 PM. Reason: added question
#18
Papaya King
Joined: Aug 2005
Posts: 1,640
Likes: 2
From: Columbus, Ohio (Grandview area)
Bikes: 2009 Felt X City D, 1985 (?) Trek 400, 1995 (?) Specialized Rockhopper, 1995 Trek 850
I have a cheap Bell from Kmart. It has a gauge that seems to be accurate. I think my highest pressure tires are about 85psi, and that seems to be just about all this pump wants to do. If I got a road bike with higher pressure tires, I think I'd want a nicer pump, but this one works for my current needs.
#19
Buh'wah?!

Joined: Jul 2008
Posts: 2,086
Likes: 2
From: Charlottesville VA
Bikes: 2014 Giant Trance
I have a cheap Bell from Kmart. It has a gauge that seems to be accurate. I think my highest pressure tires are about 85psi, and that seems to be just about all this pump wants to do. If I got a road bike with higher pressure tires, I think I'd want a nicer pump, but this one works for my current needs.
I bought a Topeak Joe Blow sport. Works great. If it ever dies, I might spend more just for good looks or something (like a Lezyne), but hopefully that'll be quite some time from now.
-Gene-
#21
I had a Joe Blow for about 10 years until the rubber hose somehow dried out and cracked. I don't think the gauge was terribly accurate, though; measured way low. Now I have a Lezyne that seems really nice, and the gauge seems to be much better. It was something like $60 though.
I have a crappy $10 pump with gauge I got from Canadian Tire. Works perfectly, gauge is close enough, plastic presta adapter works better than any of my brass ones.
#22
Joe Blow Sport. This is the best pump, I have gotten friends to buy it, and almost bought a second for my girlfriend. Stand up good, strong, good hand grips, and easy to read gauge with movable arrow pointer.

This is also the best head for a pump, I thought about upgrading once, and I don't like how the other Topeak heads work, This is great and easy.
This is also the best head for a pump, I thought about upgrading once, and I don't like how the other Topeak heads work, This is great and easy.
#23
I have a blackburn, I haven't had any trouble with it yet, hopefully never. But as far as the OP goes, I think mine is pretty nice. I paid $45ish. Combo valve, guage on the top and a fairly smooth pumping action.
#24
Member
Joined: Mar 2010
Posts: 28
Likes: 0




