Do you fix your own flats?
#1
xtrajack
Thread Starter
Join Date: Aug 2008
Location: Maine
Posts: 2,058
Bikes: Kona fire mountain/xtracycle,Univega landrover fs,Nishiki custom sport Ross professional super gran tour Schwinn Mesa (future Xtracycle donor bike)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Do you fix your own flats?
I was wondering how many here fix their own flats?
Yesterday morning on my way home, I met a woman walking her bike along the MUP. She told me "I have a flat tire."
Being the gentleman that I am, I replied "We can fix that." She said " I am just going to take it to the bike shop." (Approximately 4 miles away) My mind went "Why?"
That got me to wondering, how many folks ride and don't or won't fix their flats themselves. Also, why not?
Yesterday morning on my way home, I met a woman walking her bike along the MUP. She told me "I have a flat tire."
Being the gentleman that I am, I replied "We can fix that." She said " I am just going to take it to the bike shop." (Approximately 4 miles away) My mind went "Why?"
That got me to wondering, how many folks ride and don't or won't fix their flats themselves. Also, why not?
#2
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,984
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2395 Post(s)
Liked 2,952 Times
in
1,611 Posts
not me, not since I was about 8. before that either dad or the local service station did the flats
I think very few here would not fix their own.
but you bring up a good point....many casual/recreational cylists probably don't know the basics. Our admin is looking for a bike, and when she finds one, I have promised to teach her how to fix a flat.
I think very few here would not fix their own.
but you bring up a good point....many casual/recreational cylists probably don't know the basics. Our admin is looking for a bike, and when she finds one, I have promised to teach her how to fix a flat.
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.
#3
Very, very Senior Member
Join Date: May 2009
Location: Chicago
Posts: 1,224
Bikes: 2012 Surly Troll, 1999 Hardtail MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Yeah, definitely. For me it was all about the right tools. Once I got a "real" wrench (not one of those small ones) and tire levers, it was easy.
#5
just over the next hill
Join Date: Aug 2005
Location: Kansas City MO
Posts: 543
Bikes: Bianchi Volpe 2006 Fuji Tahoe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I was getting a flat every 200 miles for a while. So I was fixing a lot of flats. Now I have better tires and have had only one flat in over 4500 miles.
There is really nothing too it if you know how. And I am not the fastest one out there. Carrying a spare and switching, then patching the flat when I got home is the way I go.
Yes tire levers are needed.
There is really nothing too it if you know how. And I am not the fastest one out there. Carrying a spare and switching, then patching the flat when I got home is the way I go.
Yes tire levers are needed.
__________________
Enjoy the ride.
Bianchi Volpe 2006; Fuji Tahoe 1990
Enjoy the ride.
Bianchi Volpe 2006; Fuji Tahoe 1990
#6
xtrajack
Thread Starter
Join Date: Aug 2008
Location: Maine
Posts: 2,058
Bikes: Kona fire mountain/xtracycle,Univega landrover fs,Nishiki custom sport Ross professional super gran tour Schwinn Mesa (future Xtracycle donor bike)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I was getting a flat every 200 miles for a while. So I was fixing a lot of flats. Now I have better tires and have had only one flat in over 4500 miles.
There is really nothing too it if you know how. And I am not the fastest one out there. Carrying a spare and switching, then patching the flat when I got home is the way I go.
Yes tire levers are needed.
There is really nothing too it if you know how. And I am not the fastest one out there. Carrying a spare and switching, then patching the flat when I got home is the way I go.
Yes tire levers are needed.
#7
Member from- uh... France
Join Date: May 2009
Location: St Petersburg, FL
Posts: 329
Bikes: Specialized Roubaix, Bianchi Volpe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I came across a couple on the bike trail one weekend and the young lady had a flat. It was a fat tire and I had a road bike, but she said it was a slow leak and they had managed to ride several miles on it before it went completely flat. So I gave her a shot of my C02 and rode off into the sunset, leaving her boyfriend feeling inadequate.
#8
Senior Member
Join Date: Jun 2008
Location: Los Angeles
Posts: 1,894
Bikes: Bianchi Via Nirone 7, Jamis Sputnik
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I do. After having a few flats in one month, i've gotten pretty good at it. I always bring a spare tube if i'm going to be riding farther than walking distance.
#9
Banned
Since I was very young...... the LBS was across town, had very expensive labor rates, and I needed to use my bike on a daily basis.
#10
Senior Member
Join Date: Sep 2001
Location: Montreal
Posts: 6,521
Bikes: Peugeot Hybrid, Minelli Hybrid
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
If you have QR and Panaracer Pasela foldable tires, you only need a pump or CO2 to change the tube and get on your way again. With cheap bikes most people dont even have a wrench to get the wheel off.
#11
Senior Member
Join Date: Feb 2009
Location: PNW - Victoria, BC
Posts: 1,486
Bikes: 2002 Litespeed Vortex - 2007 Trek Madone 5.9 - 2004 Redline Conquest Pro - Specialized S-Works Festina Team Model - 93 Cannondale M 800 Beast of the East
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I carry a spare tube, tire irons, a pump and co2.
I only use the co2 when I'm in a hurry.
Anyone who rides regularly, should know how to fix a flat; it's really not that difficult.
I only use the co2 when I'm in a hurry.
Anyone who rides regularly, should know how to fix a flat; it's really not that difficult.
#12
GATC
My wife doesn't, she calls me. She also doesn't post/read here.
If at all possible I patch in the field but I do have a spare tube. Usually it's faster for me to find the leak and crack the bead, pull the tube out there to patch w/o removing the wheel.
If at all possible I patch in the field but I do have a spare tube. Usually it's faster for me to find the leak and crack the bead, pull the tube out there to patch w/o removing the wheel.
#13
Junior Member
Join Date: May 2010
Location: Muscatine, Iowa
Posts: 152
Bikes: Bridgestone T700, Colnago International, Cannondale SR and ST 700, BH Vento, C. Itoh Super Light, Schwinn High Sierra
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It wasn't until I worked at a real bike shop (years ago) that I found out that they fixed them and people actually brought their bikes in to have it done... So to your question, of course. Any cyclist fixes their own flats. That goes for my tubulars too.
#14
Senior Member
Of course I fix my own flats! Burst a few tubes in my time, ripped a few with the lever in my time, ruined a valve or 50 in my time.
I carry a spare tube, glueless patches (for number 2 only) and only 2, Co2 cartridges on my road bike. Pump on all the others.
Coworker: You ride ALL the way from home and back?!
Me: Yeah, it's only 10k...
Coworker: What happens when you get a flat?
Me: I fix it.
Coworker: How?
Me: Spare tube or a patch.
Coworker: How do you pump it up?
Me: <blink...blink...blink>....a pump...?
I carry a spare tube, glueless patches (for number 2 only) and only 2, Co2 cartridges on my road bike. Pump on all the others.
Coworker: You ride ALL the way from home and back?!
Me: Yeah, it's only 10k...
Coworker: What happens when you get a flat?
Me: I fix it.
Coworker: How?
Me: Spare tube or a patch.
Coworker: How do you pump it up?
Me: <blink...blink...blink>....a pump...?
#15
aka Timi
#16
Senior Member
Join Date: Aug 2007
Location: Long Beach, ca
Posts: 952
Bikes: RadRunner Plus, Kona Dew Deluxe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I rode for years without repairing my own flats, until I got into the technical side of cycling. Just how I was raised.
#17
Senior Member
Fixing my own flat is much faster than getting help. Fixing other people's flats makes me feel happy. I don't get many flats since I got religious about maintaining proper pressure and staying out of the debris zone, but I fix somebody else's every few group rides. Sometimes a female cyclist has a tire bead that is really hard to get over the rim, and I don't blame her for wanting somebody else's stronger fingers to take the abuse.
Last time I flatted on my own bike, I was about 2-3 miles into a metric century group ride and somewhere near the front of the pack. I hopped off, pulled out my spare tube and levers, changed the tube (and verified it was a bad tube not something sharp), and remounted everything well before the back of the group had passed. I caught up with some of my friends who started at the front by the first rest stop.
Last time I flatted on my own bike, I was about 2-3 miles into a metric century group ride and somewhere near the front of the pack. I hopped off, pulled out my spare tube and levers, changed the tube (and verified it was a bad tube not something sharp), and remounted everything well before the back of the group had passed. I caught up with some of my friends who started at the front by the first rest stop.
#18
Senior Member
Join Date: Mar 2010
Location: Arlington, VA
Posts: 147
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i took it to the bike show when i didn't have a tube and tools on me. other than that carry i my stuff i need to fix it except a pump, which i will get soon.
#19
Senior Member
I was raised to try to fix everything myself - for better or worse. Now I factor in what my time is worth, what tools I have, and whether I have the skills I need for the seriousness of the job. Also, whether or not my neighbors will be watching. When my wife's car flatted in the driveway, I sure fixed that myself!
#20
Senior Member
Join Date: Oct 2008
Posts: 933
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Some people are scared they'll break their bike if they attempt to fix a flat. These are the same people who will spend $150 to have their car dealer change their oil.
#21
Senior Member
Join Date: Jul 2009
Location: Chicago, IL
Posts: 183
Bikes: Sputnik
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm a fake cyclist.
in 3+ years of 5-6 days/wk of commuting, I've never once fixed my own flat. There are 3 bike shops within 1 mile of my house. Two are within 2 blocks... I pass at least 4 or 5 more on my commute to/from work. For $8-$16 bucks a pop... taking it to the shop is no biggie.
Of course, my commutes are along highly populated urban routes that parallel public transit bus/train lines. If I get a flat, I just walk or train to the nearest bike shop and 15 minutes later... I'm back on the road. Its not like getting a flat out in the middle of nowhere like most of you.
If I ever took my bike to an isolated area, I'd be sure to have the appropriate supplies to change my own tire.
in 3+ years of 5-6 days/wk of commuting, I've never once fixed my own flat. There are 3 bike shops within 1 mile of my house. Two are within 2 blocks... I pass at least 4 or 5 more on my commute to/from work. For $8-$16 bucks a pop... taking it to the shop is no biggie.
Of course, my commutes are along highly populated urban routes that parallel public transit bus/train lines. If I get a flat, I just walk or train to the nearest bike shop and 15 minutes later... I'm back on the road. Its not like getting a flat out in the middle of nowhere like most of you.
If I ever took my bike to an isolated area, I'd be sure to have the appropriate supplies to change my own tire.
#22
Senior Member
Join Date: May 2007
Location: Raleigh, NC
Posts: 8,896
Bikes: Waterford RST-22, Bob Jackson World Tour, Ritchey Breakaway Cross, Soma Saga, De Bernardi SL, Specialized Sequoia
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 6 Times
in
4 Posts
I've always fixed my own flats. I carry a spare tube and a repair kit. Usually I pile up flatted tubes in my garage and fix them all on a rainy day.
What amazes me are the guys you see on group rides who don't carry any seatbag, tools, repair kit or tube. Then they flat and expect someone else to bail them out. I don't mind helping someone out who's had bad luck, such as 2 flats on the same ride, but I am very reluctant to give someone my spare tube because they are too much of a weight-weenie to carry one. What happens if I get a flat after giving them my spare tube?
What amazes me are the guys you see on group rides who don't carry any seatbag, tools, repair kit or tube. Then they flat and expect someone else to bail them out. I don't mind helping someone out who's had bad luck, such as 2 flats on the same ride, but I am very reluctant to give someone my spare tube because they are too much of a weight-weenie to carry one. What happens if I get a flat after giving them my spare tube?
#23
Je pose, donc je suis.
Join Date: Mar 2008
Location: Back. Here.
Posts: 2,898
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times
in
2 Posts
You'd be surprised (maybe?) at the number of people here that don't fix their own flats. On the other hand, you can't swing a dead cat without hitting a bike shop.
I fix all the flats for myself, Pedaleuse, and the Pedalettes. Swap the tube and patch when I get home. I have several tubes with 5-6 patches on them.
I fix all the flats for myself, Pedaleuse, and the Pedalettes. Swap the tube and patch when I get home. I have several tubes with 5-6 patches on them.
#24
Senior Member
Join Date: Dec 2009
Location: Michigan
Posts: 104
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I always fix my own flats. I would actually feel silly taking my bike to a shop for them to fix it.
I also try to do all my own bike maintenance too. The only times I had to take my bike in was to get some work done on my bottom bracket, because I did not have the proper tool for the job. I love learning how to fix things so, if I do take my bike in, I'm always asking if I can watch to see how they do it.
I also try to do all my own bike maintenance too. The only times I had to take my bike in was to get some work done on my bottom bracket, because I did not have the proper tool for the job. I love learning how to fix things so, if I do take my bike in, I'm always asking if I can watch to see how they do it.