Apparently I'm incapable of owning a beater
#26
Banned
I don't plan on owning a beater bike since most of the local bikes are the wrong size, and style. Plus, by the time I get the beater bike to my minimum commuting standards, I might as well have bought a new bike with all the time, money, and energy spent on the beater.
#28
Senior Member
Join Date: Nov 2007
Location: Santa Fe, NM
Posts: 4,599
Bikes: Vassago Moosknuckle Ti 29+ XTR, 90's Merckx Corsa-01 9sp Record, PROJECT: 1954 Frejus SuperCorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 157 Times
in
75 Posts
I absolutely refuse to ride a low quality bike. They are horrible to keep maintained, and have bad ride characteristics (to my preferences).
The bike posted by the OP is my kind of beater - it starts with a quality frame and goes from there to become a nice riding frankenbike. I like that. And for $375 he's created a perfectly functional bike for less than the cost of a few nice components.
#29
born again cyclist
thanks. i tend to agree.
she's 15 years old and just an old cro-mo mid-level '90s mountain bike (nothing all that special in the grand scheme of things), but for some reason i'm obsessed about keeping her looking good as she ages. my much newer titanium road bike is the one i should be obsessing over, but the fact is that i obsess over all 3 of my bikes. it's just not in the cards for me to ride a crappy-looking beater bike because if i ever got my hands on one, i'd immediately start tinkering with it to bring out its inner bike beauty. i just can't let a bike to be all run-down and ugly.
she's 15 years old and just an old cro-mo mid-level '90s mountain bike (nothing all that special in the grand scheme of things), but for some reason i'm obsessed about keeping her looking good as she ages. my much newer titanium road bike is the one i should be obsessing over, but the fact is that i obsess over all 3 of my bikes. it's just not in the cards for me to ride a crappy-looking beater bike because if i ever got my hands on one, i'd immediately start tinkering with it to bring out its inner bike beauty. i just can't let a bike to be all run-down and ugly.
Last edited by Steely Dan; 11-18-10 at 01:29 PM.
#30
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,815
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3281 Post(s)
Liked 4,029 Times
in
1,487 Posts
BTW, I guess I should apologize at this point for having essentially duplicated the 20-year old clunker thread. All that's missing is Sixty-Fiver's seemingly endless stream of beautiful old bikes.
#31
commuter
Join Date: Jul 2009
Posts: 111
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wow - the bikes in your pics look they just came off an assembly line. I buy my bikes new, ride them till they self destruct, and then start replacing parts till enough fails that its seems more economical to buy new. I personally like finding their core limitations. Dont get me wrong, I use grease and such where and when appropriate.
But my 4 bikes never looked as good as yours in the pics. Even on the day that I purchased them. Course they never see wash or wax unless its something spitting up from the pavement onto the bike.
But my 4 bikes never looked as good as yours in the pics. Even on the day that I purchased them. Course they never see wash or wax unless its something spitting up from the pavement onto the bike.
#32
Stealing Spokes since 82'
Join Date: Jan 2010
Location: Boy-z, Ideeeho
Posts: 1,875
Bikes: The always reliable kuwie
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
thanks. i tend to agree.
she's 15 years old and just an old mid-level '90s mountain bike (nothing all that special in the grand scheme of things), but for some reason i'm obsessed about keeping her looking good as she ages. my much newer titanium road bike is the one i should be obsessing over, but the fact is that i obsess over all 3 of my bikes. it's just not in the cards for me to ride a crappy-looking beater bike because if i ever got my hands on one, i'd immediately start tinkering with it to bring out its inner bike beauty. i just can't let a bike to be all run-down and ugly.
she's 15 years old and just an old mid-level '90s mountain bike (nothing all that special in the grand scheme of things), but for some reason i'm obsessed about keeping her looking good as she ages. my much newer titanium road bike is the one i should be obsessing over, but the fact is that i obsess over all 3 of my bikes. it's just not in the cards for me to ride a crappy-looking beater bike because if i ever got my hands on one, i'd immediately start tinkering with it to bring out its inner bike beauty. i just can't let a bike to be all run-down and ugly.
#33
You gonna eat that?
#34
This bike is cat approved
Join Date: Mar 2010
Location: Lincoln, NE
Posts: 1,531
Bikes: To many to list...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#35
Banned
Folding bike is my beater, Older front hub was steel on those bikes , a 20 spoke radial. 349/16'' wheels
steel hubshell insures there will be no spokes pulling thru cracking the flanges..
Its the only one in town , too.
steel hubshell insures there will be no spokes pulling thru cracking the flanges..
Its the only one in town , too.
#36
Banned.
Join Date: Feb 2006
Location: SLC, UT
Posts: 832
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hahaha-just as guilty as you are!
I earnestly set out to build a beater a few years ago, but then reasoned, "I don't want to be that guy with dozens of bikes, so I might as well get one I really want..."
After four years of scanning Ebay, Craigslist & my local swapmeet, then stocking up on Dura Ace 7800 components, THEN building a bulletproof wheelset for it... voila: my beater...
...which I now relish almost as much as my '84 Masi Gran Criterium. Funny, I'd completely forgotten that this was supposed to be a beater until reading your post.
[Edit: I don't even think I could bring myself to ride it in the rain. And I've got two beater motorcycles like this too. ]
I earnestly set out to build a beater a few years ago, but then reasoned, "I don't want to be that guy with dozens of bikes, so I might as well get one I really want..."
After four years of scanning Ebay, Craigslist & my local swapmeet, then stocking up on Dura Ace 7800 components, THEN building a bulletproof wheelset for it... voila: my beater...
...which I now relish almost as much as my '84 Masi Gran Criterium. Funny, I'd completely forgotten that this was supposed to be a beater until reading your post.
[Edit: I don't even think I could bring myself to ride it in the rain. And I've got two beater motorcycles like this too. ]
#38
Senior Member
Going to buy a beater is what we all tell ourselves. If it were true, we would get the "Walmart " bike. We then go out and find something that has potential but is "down on its luck". We then fix it up to the point of dropping more money then we first thought possible.
At last ! another bike we have rescued and then we start the whole thing all over again.
* A light hearted attempt to explain the phenomena. I'm guilty as well, worse, I get attached to the beater.
3ss
At last ! another bike we have rescued and then we start the whole thing all over again.
* A light hearted attempt to explain the phenomena. I'm guilty as well, worse, I get attached to the beater.
3ss
#40
Have bike, will travel
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,284
Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 910 Post(s)
Liked 288 Times
in
158 Posts
My fast beater is stealthy;
I added a Trek 400D Elance to the stable a year ago. The bike is a 63mm sized 1987 Trek 400D Elance. It's a mid-level "sport/touring" model.
My thanks to bibliobob for sending me the CL posting.
In 2009 I converted my CX bike from a double crankset to a triple. After the conversion, I ended up with an extra Ultegra 10 speed FD, RD, 11-25 cassette, a new 105 chain, along with a Sram 46 & 38t Cyclocross Crankset & BB. I also had a Mavic Open Pro W/ 36 spoke Dura Ace hub rear wheel I purchased on eBay last year.
I only needed to get a front wheel and shifters to upgrade the Trek 400D Elance to a modern 2x10 drivetrain. I found new Dura Ace 10 speed bar-end shifters from Nashbar for $50 and purchased a 32 spoke 105 hub for $15. I had the bike shop source a matching 32 spoke Open Pro rim & spokes. I have about $750 in the bike at this point. Not cheap, but the result is excellent, IMO.
The bike is 22 lbs with the Brooks seat. This is a slighter lighter weight than the Soma. Mechanically, the bike gets an A+. The frame is responsive, stable and fun to ride. Much smoother riding than a modern Aluminum bike. The drivetrain is quick shifting and the gear set with 46 & 38t chainrings and a 11-25 10 speed cassette has a tight range. I can travel at any speed from 10 to 33 mph and always maintain my target cadence of 85 to 100 rpm.
With fenders and a VO bag;
I added a Trek 400D Elance to the stable a year ago. The bike is a 63mm sized 1987 Trek 400D Elance. It's a mid-level "sport/touring" model.
My thanks to bibliobob for sending me the CL posting.
In 2009 I converted my CX bike from a double crankset to a triple. After the conversion, I ended up with an extra Ultegra 10 speed FD, RD, 11-25 cassette, a new 105 chain, along with a Sram 46 & 38t Cyclocross Crankset & BB. I also had a Mavic Open Pro W/ 36 spoke Dura Ace hub rear wheel I purchased on eBay last year.
I only needed to get a front wheel and shifters to upgrade the Trek 400D Elance to a modern 2x10 drivetrain. I found new Dura Ace 10 speed bar-end shifters from Nashbar for $50 and purchased a 32 spoke 105 hub for $15. I had the bike shop source a matching 32 spoke Open Pro rim & spokes. I have about $750 in the bike at this point. Not cheap, but the result is excellent, IMO.
The bike is 22 lbs with the Brooks seat. This is a slighter lighter weight than the Soma. Mechanically, the bike gets an A+. The frame is responsive, stable and fun to ride. Much smoother riding than a modern Aluminum bike. The drivetrain is quick shifting and the gear set with 46 & 38t chainrings and a 11-25 10 speed cassette has a tight range. I can travel at any speed from 10 to 33 mph and always maintain my target cadence of 85 to 100 rpm.
With fenders and a VO bag;
Last edited by Barrettscv; 01-04-11 at 09:56 PM.
#41
Born Again Pagan
Join Date: Aug 2009
Location: Southwestern Ontario
Posts: 2,241
Bikes: Schwinn hybrid, Raleigh MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Evolution of a beater.
I bought this Raleigh off of Kijiji (similar to Craiglist) for 40 bucks:
I swapped the handlebar, seat, and tires and added a rack & kickstand:
The original plan was to turn it into a dedicated winter bike with studded tires, IGH, and drum brakes. Figuring in for parts, stuff I could do, and stuff I would have to let a shop do, I could easily have gotten into the $600-$700 range. Once I figured that out I started saving my pennies for a new bike with all the features I wanted.
So instead I bought some slicks and fenders, added a bell and some lights, upgraded the rack, and started using it as a back-up commuter:
The cassette was really worn, so I decided to upgrade the wheels to a decent aluminum set, and replaced the worn BB and crankset. I now use it as my fair-weather recreational family hauler. I put the fenders on my daughter's bike (since her bike will see rain) and added a double-leg kickstand, some quality brake pads, and the seat for my son:
I could sink a bunch more money into it, but seeing as how it started life as a Big Box Store bike, I don't think it's worth it. One day I will either buy a bike like the OP's and upgrade it in a like fashion, or buy a nice new frameset from Soma or Surly and build that up as my family hauler. At that time the Raleigh will be relegated to the parts bin, or donated to someone who needs some basic, reliable transportation.
I swapped the handlebar, seat, and tires and added a rack & kickstand:
The original plan was to turn it into a dedicated winter bike with studded tires, IGH, and drum brakes. Figuring in for parts, stuff I could do, and stuff I would have to let a shop do, I could easily have gotten into the $600-$700 range. Once I figured that out I started saving my pennies for a new bike with all the features I wanted.
So instead I bought some slicks and fenders, added a bell and some lights, upgraded the rack, and started using it as a back-up commuter:
The cassette was really worn, so I decided to upgrade the wheels to a decent aluminum set, and replaced the worn BB and crankset. I now use it as my fair-weather recreational family hauler. I put the fenders on my daughter's bike (since her bike will see rain) and added a double-leg kickstand, some quality brake pads, and the seat for my son:
I could sink a bunch more money into it, but seeing as how it started life as a Big Box Store bike, I don't think it's worth it. One day I will either buy a bike like the OP's and upgrade it in a like fashion, or buy a nice new frameset from Soma or Surly and build that up as my family hauler. At that time the Raleigh will be relegated to the parts bin, or donated to someone who needs some basic, reliable transportation.
#42
Senior Member
Join Date: Jun 2008
Location: Atlanta
Posts: 2,978
Bikes: Cannondale T700s and a few others
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
It really is a sickness isn't it?
My most recent "Beater" 1984 Trek 420 picked up for $39 off CL.
The cool is the Stock Mallard Helicomatic wheels were replaced with Polished CR 18's on 105 hubs. I think it might be a 8 speed hub although it has a 7 speed cassette on it.
Parts laying around here:
8 speed 105 SC group thats about to get pulled off the $300 beater R300 Cdale (its getting replaced with Ultegra drivetrain and Campy Proton wheels. I think this group will land on my wifes Terry with the 3x8 RSX brifters and the 105 Tripple. So that still leaves a 105 long cage and the 105SC 2 sets of 105 cranks (but I do like that halfstep with granny gear it has on it).
Hmm I have some 7 Speed Shimano Bar ends but I really what to put the Dirt drops on my Mountain bike and would need the 7x3 bar ends for that.
I have a nearly complete Campy Avanti groupo here as well.
Decisions, decisions. Course if I had half a clue I could just flip it as is and put a quick $130 in my pocket LOL.
My most recent "Beater" 1984 Trek 420 picked up for $39 off CL.
The cool is the Stock Mallard Helicomatic wheels were replaced with Polished CR 18's on 105 hubs. I think it might be a 8 speed hub although it has a 7 speed cassette on it.
Parts laying around here:
8 speed 105 SC group thats about to get pulled off the $300 beater R300 Cdale (its getting replaced with Ultegra drivetrain and Campy Proton wheels. I think this group will land on my wifes Terry with the 3x8 RSX brifters and the 105 Tripple. So that still leaves a 105 long cage and the 105SC 2 sets of 105 cranks (but I do like that halfstep with granny gear it has on it).
Hmm I have some 7 Speed Shimano Bar ends but I really what to put the Dirt drops on my Mountain bike and would need the 7x3 bar ends for that.
I have a nearly complete Campy Avanti groupo here as well.
Decisions, decisions. Course if I had half a clue I could just flip it as is and put a quick $130 in my pocket LOL.
#43
nashcommguy
Join Date: Feb 2006
Location: nashville, tn
Posts: 2,499
Bikes: Commuters: Fuji Delray road, Fuji Discovery mtb...Touring: Softride Traveler...Road: C-dale SR300
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I ended up buying alot of gear from him over the next few years. It was a crappy, noname, pac-rim rb, but I loved it. Gave it to a friend who rode the crap out of it and gave it to someone else...wonder if that bike is still around?
#45
Have bike, will travel
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,284
Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 910 Post(s)
Liked 288 Times
in
158 Posts
#47
Have bike, will travel
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,284
Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 910 Post(s)
Liked 288 Times
in
158 Posts
#48
Senior Member
Join Date: Jul 2006
Location: Columbus, OH
Posts: 11,375
Bikes: '08 Surly Cross-Check, 2011 Redline Conquest Pro, 2012 Spesh FSR Comp EVO, 2015 Trek Domane 6.2 disc
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
I rescued my beater from a dumpster. It's a rusted 1988 Trek 400 and I haven't repainted it. The majority of the parts on it are scavenged from a salvaged 1991 Schwinn PDG Series-5 (Japanamount). I spent less than $100 getting it to rideable condition as a fixie and it's going to be my primary commuter ride for a while. I've taken it on a century ride. It's a true beater, and I love it like it was my fancy brevet bike.
__________________
"I feel like my world was classier before I found cyclocross."
- Mandi M.
"I feel like my world was classier before I found cyclocross."
- Mandi M.
#49
Senior Member
Join Date: Apr 2005
Location: Brownsville, TX
Posts: 2,174
Bikes: Surly CC
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Around here I think peeps would be more incline to steal a "beater" because of the simple fact that they can roll into one of the local pawn shops, grab a fast $10 and never worry about it again. It's the $1.5k+ bikes they don't touch for fear of death. The biking community is tight here, and there isn't a big enough population to hide a theft like that. Add in the grand theft option for anything of real value and the average punk won't touch anything that looks nice.
Thread
Thread Starter
Forum
Replies
Last Post
Squeeze
Classic & Vintage
10
08-17-13 08:32 AM
SurlyLaika
Bicycle Mechanics
36
06-30-12 11:19 AM