Water Proof/Resistent gloves Advice
#1
Thread Starter
Senior Member
Joined: Nov 2007
Posts: 882
Likes: 1
From: Suburbia, Ontario
Bikes: Specialized FSR
Water Proof/Resistent gloves Advice
Hi all,
Seems like the rainy season has arrived. Im wondering if anyone has any good water proof riding gloves they could recommend. The temperature isn't really cold, but the rain can be chilly on its way down. Something lightweight with a degree of water protection should be sufficient.
Does anyone have any leads? Pics are welcome. Free shipping to Canada is a bonus.
Cheers
Seems like the rainy season has arrived. Im wondering if anyone has any good water proof riding gloves they could recommend. The temperature isn't really cold, but the rain can be chilly on its way down. Something lightweight with a degree of water protection should be sufficient.
Does anyone have any leads? Pics are welcome. Free shipping to Canada is a bonus.
Cheers
#2
I've not had luck with waterproof gloves. A friend a work uses a pair of Gore gloves that he likes. I have two pair of wool gloves in winter I swap out to give time to dry and two pair of summer gloves I swap when wet.
#3
LET'S ROLL
Joined: Nov 2009
Posts: 4,789
Likes: 59
From: NEW YORK, NY - USA
Bikes: 2014 BMC Gran Fondo, 2013 Brompton S6L-X
If it's too warm to wear my winter gloves, I used to go glove free.
But now, I started wearing dishwashing gloves and I like it. Now
for all of the Fred haters, I'm not using the yellow ones; I'm using
blue ones that I "borrowed" from my job
But now, I started wearing dishwashing gloves and I like it. Now
for all of the Fred haters, I'm not using the yellow ones; I'm using
blue ones that I "borrowed" from my job
__________________
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
#4
Senior Member

Joined: Feb 2001
Posts: 12,948
Likes: 9
From: England
I seem to get wetter with waterproof gloves than without.
I just use a fleece windstopper glove with a leather palm. It gets wet then it dries out.
I always wear gloves, their main purpose is to protect your hands from a skinning in a fall and I can assure you that they work. I removed 1mm of leather from my summer mitts in one slide.
I just use a fleece windstopper glove with a leather palm. It gets wet then it dries out.
I always wear gloves, their main purpose is to protect your hands from a skinning in a fall and I can assure you that they work. I removed 1mm of leather from my summer mitts in one slide.
#5
Older than dirt
Joined: May 2008
Posts: 5,342
Likes: 2
From: Winchester, VA
Bikes: Too darn many.. latest count is 11
Anything truly waterproof means your hands are going to sweat inside them. I'll agree with a previous poster - Gore Bike Wear gloves. Pricey, but work very well.
#6
Senior Member


Joined: Jul 2008
Posts: 30,465
Likes: 4,547
From: 25 miles northwest of Boston
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
multiple pairs of gloves. alternate between while drying others. choose gloves that perform well when wet. some may be "waterproof" and some others may just be good fabric that feels good when wet. some may perform better in downpours while others are suited for drizzle. try a pair or two that are expensive from a pro bike shop and try some cheaper stuff from the hunting section of K-mart
#7
GATC

Joined: Jul 2006
Posts: 8,839
Likes: 183
From: south Puget Sound
I got some unbelievable water-proof/breathable goretex cycling gloves that others have cited above. I love them. They are definitely only for sub 50F though, maybe sub 40F. But still, it's the difference between working fingers and not-working fingers when I get to the office through the cold part of our 9 month rainy season. This time of year, above 50F, I just wear crocheted fingerless gloves.
Layering can also work but it can be tricky and I never got it to perform as solidly as those gore gloves have been.
On the other hand, so to speak, these specific gloves are pretty flimsy and the liner gets pulled inside out easily (maybe why they're remaindered to performance? I also got mine cheap). My long-term plan (maybe not too long actually) would be to cut out the liner and then yeah wear wool glove liners under the shell.
Layering can also work but it can be tricky and I never got it to perform as solidly as those gore gloves have been.
On the other hand, so to speak, these specific gloves are pretty flimsy and the liner gets pulled inside out easily (maybe why they're remaindered to performance? I also got mine cheap). My long-term plan (maybe not too long actually) would be to cut out the liner and then yeah wear wool glove liners under the shell.
#8
Banned
Joined: Jun 2010
Posts: 43,586
Likes: 1,380
From: NW,Oregon Coast
Bikes: 8
Shell glove + separate liner glove, I got some loose Gore tex glove bladders,
I could put them on too, turns putting the gloves on into a 6 part process,
but mostly with the shell/liner glove, the ability to dry them separately
speeds the drying.
Got he kit for my Irish/Scotland Tour.
but for best rain protection, .. a cycling rain cape.
It drapes over the bars, and your hands..
I could put them on too, turns putting the gloves on into a 6 part process,
but mostly with the shell/liner glove, the ability to dry them separately
speeds the drying.
Got he kit for my Irish/Scotland Tour.
but for best rain protection, .. a cycling rain cape.
It drapes over the bars, and your hands..
Last edited by fietsbob; 05-19-11 at 08:13 AM.
#9
Senior Member
Joined: Apr 2011
Posts: 209
Likes: 0
I bought some SealSkins gloves that work very well for mid-range temps - between 35 and 70 more or less.
https://www.sealskinz.com/ultra-grip-gloves
I got mike from a UK web site (Wiggle or something) but I think REI, Bass Pro, etc sells them, too.
https://www.basspro.com/SealSkinz-Wat.../19362/-677059
They are very snug fitting, so you might want to buy a size larger.
https://www.sealskinz.com/ultra-grip-gloves
I got mike from a UK web site (Wiggle or something) but I think REI, Bass Pro, etc sells them, too.
https://www.basspro.com/SealSkinz-Wat.../19362/-677059
They are very snug fitting, so you might want to buy a size larger.
#11
No one carries the DogBoy

Joined: Feb 2004
Posts: 2,320
Likes: 2
From: Upper Midwest USA
Bikes: Roubaix Expert Di2, Jamis Renegade, Surly Disc Trucker, Cervelo P2, CoMotion Tandem
I agree with AntEater. Forget trying to stay dry, just stay warm. Wool works, as do some of the techy stuff like Gore. Wool is much cheaper.
#12
If it's not that cold, wear wool.
If you wear gloves that are truly waterproof, you have to either have your hands above your forearms or a waterproof jacket over the gloves at your wrists or water is going to run down into the gloves.
As DogBoy says, wool is cheap.
If you wear gloves that are truly waterproof, you have to either have your hands above your forearms or a waterproof jacket over the gloves at your wrists or water is going to run down into the gloves.
As DogBoy says, wool is cheap.
#13
Senior Member
Joined: Nov 2007
Posts: 4,599
Likes: 158
From: Santa Fe, NM
Bikes: Vassago Moosknuckle Ti 29+ XTR, 90's Merckx Corsa-01 9sp Record, PROJECT: 1954 Frejus SuperCorsa
+1 on wool or something similar. Let the gloves get wet - you'll still stay quite warm (similar to how neoprene works in wetsuits).
I wear a pair of thin knit gloves similar to the sealskinz, and they work for me down to about 7C, at which point I add a waterproof overmitt.
I wear a pair of thin knit gloves similar to the sealskinz, and they work for me down to about 7C, at which point I add a waterproof overmitt.
#14
nashcommguy
Joined: Feb 2006
Posts: 2,499
Likes: 0
From: nashville, tn
Bikes: Commuters: Fuji Delray road, Fuji Discovery mtb...Touring: Softride Traveler...Road: C-dale SR300
) mentions it's waterproofing properties. An internet search would probably scare up a source.
#15
Senior Member
Joined: Dec 2010
Posts: 1,965
Likes: 6
From: Falls City, OR
Bikes: 2012 Salsa Fargo 2, Rocky Mountain Fusion, circa '93
I have the Gore Gore-tex gloves. They work. My hands get a little damp from sweat but that's it. They do when it's not raining, too, on the few occasions that I"ve experienced that! Yesterday and today are starting to get my hopes up.
In temps as low as 28 F. I didn't need any liners, which is good because I don't have anything that would fit.
In temps as low as 28 F. I didn't need any liners, which is good because I don't have anything that would fit.
#16
Senior Member
Joined: Aug 2007
Posts: 1,536
Likes: 4
From: central ohio
Bikes: 96 gary fisher 'utopia' : 99 Softride 'Norwester'(for sale), 1972 Raleigh Twenty. Surly 1x1 converted to 1x8, 96 Turner Burner
I think for what you want try a search for 'waterproof fishing glove'. I bought a pair from Sierra Trading Post a few years back. They're not exactly waterproof but they do keep my hands warm in a chilly rain. I have a 45 min commute and they start leaking after about 25 or 30 mins. Which I can deal with.
#17
Senior Member
Joined: Jul 2007
Posts: 357
Likes: 0
From: Santa Barbara, CA
I can't imagine wearing latex *anything* for cycling and thinking it's a good idea. I understand trying to save money or embracing ghetto-ness, but this is actually having a negative effect on you. Latex can't breathe. It makes absolutely no sense as a glove. Why not just wear nothing at all?
#18
Hrumph!
Joined: Jan 2009
Posts: 253
Likes: 0
From: Vancouver, Canada
Bikes: 2007 Dahon Cadenza w/ Alfine IGH11, modified MEC Desire w/Alfine IGH8,+ 2 ebikes: Bionx PL350 & 36V eZee FHB/Tidalforce frames.
I like these: MEC Drenchers.
Waterproof shells/glove covers.
Waterproof shells/glove covers.
#19
LET'S ROLL
Joined: Nov 2009
Posts: 4,789
Likes: 59
From: NEW YORK, NY - USA
Bikes: 2014 BMC Gran Fondo, 2013 Brompton S6L-X
I can't imagine wearing latex *anything* for cycling and thinking it's a good idea. I understand trying to save money or embracing ghetto-ness, but this is actually having a negative effect on you. Latex can't breathe. It makes absolutely no sense as a glove. Why not just wear nothing at all?

I bike when it's raining regardless of temperature, so that could range from 40F to 80F. As you can see everybody has a different glove in this thread, it's all a matter of what works for you. For me rain 50F and under waterproof winter gloves, 50F - 60F dishwashing gloves, 60F and over nothing.
Bike to work week(which is every week for me), 4 straight days of damp/rainy commute


Soggy Bike to Work Day by 1nterceptor, on Flickr
__________________
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
#20
Noobie of the year :)
Joined: Jul 2009
Posts: 287
Likes: 0
From: Hour South of Boston
Bikes: 1980's Miyata Seven Ten
I make 4 times what the average American makes, so I'm not wearing dishwashing gloves because I'm broke 
I bike when it's raining regardless of temperature, so that could range from 40F to 80F. As you can see everybody has a different glove in this thread, it's all a matter of what works for you. For me rain 50F and under waterproof winter gloves, 50F - 60F dishwashing gloves, 60F and over nothing.
Bike to work week(which is every week for me), 4 straight days of damp/rainy commute
Soggy Bike to Work Day by 1nterceptor, on Flickr

I bike when it's raining regardless of temperature, so that could range from 40F to 80F. As you can see everybody has a different glove in this thread, it's all a matter of what works for you. For me rain 50F and under waterproof winter gloves, 50F - 60F dishwashing gloves, 60F and over nothing.
Bike to work week(which is every week for me), 4 straight days of damp/rainy commute

Soggy Bike to Work Day by 1nterceptor, on Flickr
Oh and I like the cut-off fenders
I wish all bikes were made with enough clearance for full fenders - my front fork has about 1 mm of room with 700x23 tires.
#21
LET'S ROLL
Joined: Nov 2009
Posts: 4,789
Likes: 59
From: NEW YORK, NY - USA
Bikes: 2014 BMC Gran Fondo, 2013 Brompton S6L-X

SKS also makes short fenders, Raceblades I think they're called.
You sure there's no room for this?

__________________
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
#22
Daily Rider
Joined: Sep 2006
Posts: 639
Likes: 0
From: Boulder, CO
Bikes: 89 Bridgestone MB-3, 93 Bridgestone RB-1,93 Bridgestone MB-1, 95 Klein Fervor, 02 BikeE AT, 06 Surly Cross-check, 8? Schwinn Frontier
__________________
[FONT="Verdana"][SIZE="1"]
2006SurlyCrosscheck]
1995KleinFervor
1993BstoneRB1
2007IROSSBFGS
1986PanasonicDX4000
2014E-JOE
[FONT="Verdana"][SIZE="1"]
2006SurlyCrosscheck]
1995KleinFervor
1993BstoneRB1
2007IROSSBFGS
1986PanasonicDX4000
2014E-JOE
#23
I've got a few different pairs of wind and/or water -proof gloves. I don't like any of them, especially for cycling. Unless it's freezing rain and -10 F out, or the wind is blowing you over, a thin pair of merino liners is the most comfortable thing you can have on your hands.
#24
Senior Member

Joined: Jul 2008
Posts: 6,431
Likes: 44
From: Minneapolis, MN
I bought a pair of waterproof gloves from Specialized which were waterproof but you could take out the liner and not have almost any insulation. Unfortunately they seem to have redesigned them and the new "Subzero" gloves are now mitten-style. :-(
The best looking gloves (from the pics) with a minimum of insulation that I've seen (online) are the Gore Bikewear Countdown gloves:
https://www.amazon.com/Gore-Countdown...5&sr=8-2-spell
However, comments from the other people in this thread definitely still apply - if you're not also completely decked out in waterproof gear none of these options are good,. because water will just run down your arm into the glove. In this case, or if you just want something cheaper, I would go with the suggestion of Merino Wool gloves - not waterproof, but they keep your hands warm even when wet so they should be good for any riding above freezing.
The best looking gloves (from the pics) with a minimum of insulation that I've seen (online) are the Gore Bikewear Countdown gloves:
https://www.amazon.com/Gore-Countdown...5&sr=8-2-spell
However, comments from the other people in this thread definitely still apply - if you're not also completely decked out in waterproof gear none of these options are good,. because water will just run down your arm into the glove. In this case, or if you just want something cheaper, I would go with the suggestion of Merino Wool gloves - not waterproof, but they keep your hands warm even when wet so they should be good for any riding above freezing.





