Debris and Broken Glass On The Road
#51
#53
Dirt junkie.

Joined: Nov 2011
Posts: 406
Likes: 6
From: Minneapolis
Bikes: Surly Ice Cream Truck, Peacock Groove road bikem, Salsa Fargo
I suggest you watch your back, my friend.
#54
#55
I see a big movie deal in his future!!
On topic , i gave up on avoiding it . I added a tyrer liner to my already puntuce resitant tyres and now i just have to watch out for nails, metal wire and bougainvillea vines .
#56
Senior Member
Joined: Feb 2007
Posts: 4,398
Likes: 6
From: Seville, Spain
Bikes: Brompton M6R, mountain bikes, Circe Omnis+ tandem
Even though I use the highly puncture resistant Marathon Plus tires, I still try to avoid running over glass, but if I do, I stop and have a look to make sure I haven't picked up any shards. If I see any, I knock them off with a gloved hand or stick before they've had a chance to work their way in. This may be overkill, but it's a habit I picked up back in the 70's, before tires such as the Marathon Plus existed. Something's working because I very rarely have punctures.
Last edited by Ekdog; 11-26-12 at 04:14 PM. Reason: spelling
#57
I'd suggest some self sealing tubes like Michlins or alternatively adding Stans Notubes or Zefal latex goam to a standard tube. You could further up that for effectiveness by going to tires with flat protection built in IN ADDITION to the tube protection mentioned.
If glass gets past that - chances are you'll need a new tire and not just a new tube. Otherwise - you should be good for the season. One cautionary note - anti-flat liquids aren't recommended for winter use. They'll be too sluggish to spread effectively and just upset the balance of the wheel.
daven1986 Get some armadillo tyres, and don't worry about it

Some of you recommend self healing tires or self sealing tubes, I wonder where can I get those since I don't have any bike shops around were I live. Just have a Big Walmart or some other big stores. Of course you all going to say online...I will make my research, however daven1986 were can I get armadillo tires??? I my bike is a cruiser, retro type so can I find this tires with white bands?
Thank you for everyone that post here with good advice, I have a check list now and I will practice how to fix a tire at home.
#58
2 Fat 2 Furious
Joined: Nov 2010
Posts: 3,996
Likes: 2
From: England
Bikes: 2009 Specialized Rockhopper Comp Disc, 2009 Specialized Tricross Sport RIP
I was so worried today while I was riding my bike, for the first time I've seen so many broken glass and debris all over the place, almost all the road...
Last week I took the precaution to buy a spare inner tube just in case, but I still worry cause like it or not there is always the chance to get in trouble on the road.
Now My question is do I need more than the spare inner tube for safety and quick fixing? Just trying to carry the necessary, I also carry a pump.
Last week I took the precaution to buy a spare inner tube just in case, but I still worry cause like it or not there is always the chance to get in trouble on the road.
Now My question is do I need more than the spare inner tube for safety and quick fixing? Just trying to carry the necessary, I also carry a pump.
I've ridden Schwalbe Marathon Plus tyres for something like 6000 miles so far and so far only had one puncture, caused by a half-inch piece of hawthorn. Other times I've pulled similarly sized thorns out of the tyre and they haven't gone through.
Marathons are heavy tyres, and they will make the ride harder as they don't give as much as tyres without the plastic lining. That said I'd rather deal with a harder ride than fixing a puncture in the rain when I'm in a hurry.
__________________
"For a list of ways technology has failed to improve quality of life, press three"
"For a list of ways technology has failed to improve quality of life, press three"
#59
Senior Member



Joined: Mar 2007
Posts: 9,190
Likes: 5,381
From: SF Bay Area, East bay
Bikes: Miyata 618 GT, Marinoni, Kestral 200, Soma double cross 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball, Waterford rs11
Armadillo's are usually only sold through Specialized dealers. Other options.. https://www.biketiresdirect.com/searc...lick-mtb-tires
#60
Tractorlegs
Joined: Oct 2011
Posts: 3,185
Likes: 60
From: El Paso, TX
Bikes: Schwinn Meridian Single-Speed Tricycle
Even though I use the highly puncture resistant Marathon Plus tires, I still try to avoid running oven glass, but if I do, I stop and have a look to make sure I haven't picked up any shards. If I see any, I knock them off with a gloved hand or stick before they've had a chance to work their way in. This may be overkill, but it's a habit I picked up back in the 70's, before tires such as the Marathon Plus existed. Something's working because I very rarely have punctures.
__________________
********************************
Trikeman
Trikeman
#61
Even though I use the highly puncture resistant Marathon Plus tires, I still try to avoid running oven glass, but if I do, I stop and have a look to make sure I haven't picked up any shards. If I see any, I knock them off with a gloved hand or stick before they've had a chance to work their way in. This may be overkill, but it's a habit I picked up back in the 70's, before tires such as the Marathon Plus existed. Something's working because I very rarely have punctures.
#62
Even though the above was developed for tubeless tires, you can put it in your tubes and it works great. It is much better than slime. You need a removable valve stem (sometimes hard to find for presta tubes) or you just poke a hole in a tube, squeeze the right amount of sealant in and then patch the hole.
__________________
Land of the Free, Because of the Brave.
Land of the Free, Because of the Brave.
#63
Senior Member

Joined: Jun 2008
Posts: 1,145
Likes: 780
From: Shanghai, China
Bikes: Waltly Custom Ti // Seaboard CX01 // Dahon Boardwalk
Failures to view the big picture.
https://news.softpedia.com/news/Glass...nt-94821.shtml
Glass manufacturing:
Two types of air emissions are generated: those from the combustion of fuel for operating the glass-melting furnaces, and fine particulates from the vaporization and recrystallization of materials in the melt. The main emissions are sulfur oxides (SOx), nitrogen oxides (NOx), and particulates, which can contain heavy metals such as arsenic and lead. Particulates from lead crystal manufacture can have a lead content of 20–60% and an arsenic content of 0.5–2%. Certain specialty glasses can produce releases of hydrogen chloride (HCl), hydrogen fluoride (HF), arsenic, boron, and lead from raw materials. Container, pressing, and blowing operations produce a periodic mist when the hot gob comes into contact with the release agent used on the molds. Some releases of particulates will take place in tapping. Lead glass manufacture may result in lead emissions of about 2–5 kg/t. In all cases, the concentration of heavy metals and other pollutants in the raw flue gas mainly depends on the type of fuel used, the composition of the feed material, and the portion of recycled glass. High input of sulfates or potassium nitrate may increase emissions of sulfur dioxide and nitrogen oxides, respectively. Where nitrate is used, more than two thirds of the introduced nitrogen may be emitted as nitrogen oxides. The use of heavy metals as coloring or decoloring agents will increase emissions of these metals.
https://news.softpedia.com/news/Glass...nt-94821.shtml
Glass manufacturing:
Two types of air emissions are generated: those from the combustion of fuel for operating the glass-melting furnaces, and fine particulates from the vaporization and recrystallization of materials in the melt. The main emissions are sulfur oxides (SOx), nitrogen oxides (NOx), and particulates, which can contain heavy metals such as arsenic and lead. Particulates from lead crystal manufacture can have a lead content of 20–60% and an arsenic content of 0.5–2%. Certain specialty glasses can produce releases of hydrogen chloride (HCl), hydrogen fluoride (HF), arsenic, boron, and lead from raw materials. Container, pressing, and blowing operations produce a periodic mist when the hot gob comes into contact with the release agent used on the molds. Some releases of particulates will take place in tapping. Lead glass manufacture may result in lead emissions of about 2–5 kg/t. In all cases, the concentration of heavy metals and other pollutants in the raw flue gas mainly depends on the type of fuel used, the composition of the feed material, and the portion of recycled glass. High input of sulfates or potassium nitrate may increase emissions of sulfur dioxide and nitrogen oxides, respectively. Where nitrate is used, more than two thirds of the introduced nitrogen may be emitted as nitrogen oxides. The use of heavy metals as coloring or decoloring agents will increase emissions of these metals.
#64
But you are right, plastic manufacturing causes less air pollution. How is air pollution control in China?
Can we get back on topic now?
__________________
Land of the Free, Because of the Brave.
Land of the Free, Because of the Brave.
Last edited by CB HI; 11-27-12 at 04:02 AM.
#65
Banned
Joined: Jul 2010
Posts: 8,543
Likes: 41
From: England / CPH
Bikes: 2010 Cube Acid / 2013 Mango FGSS
Actually, we've found it really hard to determine what are the raw material sources for PET manufacturing in China. Most companies would not release what they use (what % is refuse for example.)
Last edited by acidfast7; 11-27-12 at 03:44 AM.
#66
Oh No!!! While I was riding today again I've tried to avoid the glass and I almost crash to another biker, to prevent from crashing with him cause we were in a a very busy road I was in the inner part of the sidewalk and there was a wall my arm went straight to it like a sanding wall. OUCH!!!!! My arm hurts a little
I had to apply some healing cream cause is like a minor burn.
I'm starting to not like glass at all
...I will follow some advice ASAP. I will be always having this problem, the city I live in through out the years has come very trash polluted were ever you go.
OUCH!!!!
I had to apply some healing cream cause is like a minor burn.I'm starting to not like glass at all
...I will follow some advice ASAP. I will be always having this problem, the city I live in through out the years has come very trash polluted were ever you go.OUCH!!!!
#68
Banned
Joined: May 2011
Posts: 5,804
Likes: 0
From: Northern California
Bikes: Raleigh Grand Prix, Giant Innova, Nishiki Sebring, Trek 7.5FX
Oh No!!! While I was riding today again I've tried to avoid the glass and I almost crash to another biker, to prevent from crashing with him cause we were in a a very busy road I was in the inner part of the sidewalk and there was a wall my arm went straight to it like a sanding wall. OUCH!!!!! My arm hurts a little
I had to apply some healing cream cause is like a minor burn.
I'm starting to not like glass at all
...I will follow some advice ASAP. I will be always having this problem, the city I live in through out the years has come very trash polluted were ever you go.
OUCH!!!!
I had to apply some healing cream cause is like a minor burn.I'm starting to not like glass at all
...I will follow some advice ASAP. I will be always having this problem, the city I live in through out the years has come very trash polluted were ever you go.OUCH!!!!

Don't kill yourself, trying to save your darn tires!
....You can always buy new tires! However, you can't buy a new you!
#69
These don't work. In fact they are dangerous because they will roll off your rim. If you are lucky, like I was, it will happen in a low speed corner. God help you if it happens on a descent.
I know erig007 was probably joking, but I feel compelled to warn others away from these things. They ought to be illegal.
I know erig007 was probably joking, but I feel compelled to warn others away from these things. They ought to be illegal.
#70
#71
Senior Member
Joined: Feb 2007
Posts: 4,398
Likes: 6
From: Seville, Spain
Bikes: Brompton M6R, mountain bikes, Circe Omnis+ tandem
You are the one that brought up a solution to broken glass on the streets (plastic bottles) that some of us think is unacceptable because of its effects on the environment. That's hardly "hijacking" the thread. We're looking for the best solution to the problem.
#72
Senior Member
Joined: Feb 2007
Posts: 4,398
Likes: 6
From: Seville, Spain
Bikes: Brompton M6R, mountain bikes, Circe Omnis+ tandem
These don't work. In fact they are dangerous because they will roll off your rim. If you are lucky, like I was, it will happen in a low speed corner. God help you if it happens on a descent.
I know erig007 was probably joking, but I feel compelled to warn others away from these things. They ought to be illegal.
I know erig007 was probably joking, but I feel compelled to warn others away from these things. They ought to be illegal.
#73
Which was precisely on topic and you had to hijack the thread with an environmental rant having nothing to do with problems with glass causing flats. Get back on topic please.
__________________
Land of the Free, Because of the Brave.
Land of the Free, Because of the Brave.
#74
Senior Member
Joined: Feb 2007
Posts: 4,398
Likes: 6
From: Seville, Spain
Bikes: Brompton M6R, mountain bikes, Circe Omnis+ tandem
Going over to plastic bottles is not a viable alternative because of the impact it would have on the environment. I won't be bullied by the likes of you.
#75
The claims of plastic bottles destroying the earth, oceans or mankind are Pure BS.
__________________
Land of the Free, Because of the Brave.
Land of the Free, Because of the Brave.
Last edited by CB HI; 11-29-12 at 01:20 AM.






