What do you think of this bike for a short commute?
#1
Newbie
Thread Starter
Join Date: Apr 2014
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What do you think of this bike for a short commute?
I found this bike on Craigslist for $175. I am thinking about buying it to commute to and from light rail stations in Baltimore for work. It won't be more than a one mile commute at either end of the rail ride. I like it for its light frame and mustache handlebars that allow me to sit upright or lean forward. Is a three speed acceptable for a commute as short as mine? The route from the light rail to work is a slight incline (you can see it if you search "railroad ave, Baltimore" and head north on Fall Rd using street view). I'm a little concerned about not being able to change gears while pedaling, but I could get used to it. Besides commuting, I'll use my bike to get around the city. Thanks for your help!
Last edited by cheezliz; 04-12-14 at 02:17 PM.
#2
Senior Member
Join Date: Jun 2006
Location: Anchorage AK
Posts: 149
Bikes: 2015 Salsa Fargo 3, 2000 Specialized Rockhopper
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 9 Times
in
4 Posts
Knowing guys who commute 5-10 miles on single speed bikes ,a 3 speed is a big plenty unless your one mile is straight up. If you like it, and the price is acceptable, buy it and ride the stuffing out of it.
#3
♋ ☮♂ ☭ ☯
Join Date: Feb 2005
Location: 40205 'ViLLeBiLLie
Posts: 7,902
Bikes: Sngl Spd's, 70's- 80's vintage, D-tube Folder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
The only issue with Peugeots s that if the require any parts, it can be a little frustrating matching them up due to the odd french sizings and threads, etc.
I would not let that stop me from buying a nice one, though. that looks like a nice one
I would not let that stop me from buying a nice one, though. that looks like a nice one
__________________
☞-ADVOCACY-☜ Radical VC = Car people on bikes. Just say "NO"
☞-ADVOCACY-☜ Radical VC = Car people on bikes. Just say "NO"
#4
Banned
cheap old used bike if stolen is not much of a loss .. but get a really good lock ..
Sturmey 3 speed .. why worry about shifting while pedaling
you only need to stop pedaling for a half second for the gear change to take place, ,and you can downshift while stopped . (stop sign/light)
its actually simpler than a derailleur bike , in the long run ..
Sturmey 3 speed .. why worry about shifting while pedaling
you only need to stop pedaling for a half second for the gear change to take place, ,and you can downshift while stopped . (stop sign/light)
its actually simpler than a derailleur bike , in the long run ..
Last edited by fietsbob; 04-12-14 at 02:30 PM.
#5
Newbie
Thread Starter
Join Date: Apr 2014
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
All very good points. Thanks! Keep 'em coming; I want to give the seller an answer tonight before someone else tests it out tomorrow.
Very true, and important to consider in Baltimore. I have a U-lock and a cable that I assume will be enough protection.
Very true, and important to consider in Baltimore. I have a U-lock and a cable that I assume will be enough protection.
#6
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
That was a very solid bike. It came with, I believe, Rigida 16-22 aluminum rims which are very good. The parts on the bike is solid as is the frame. This will make a fine commuter.
#7
contiuniously variable
Hope you got it, looks quite good for your described uses!
- Andy
- Andy
#8
Senior Member
Join Date: Jun 2007
Location: Minneapolis
Posts: 8,101
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 52 Post(s)
Likes: 0
Liked 17 Times
in
13 Posts
Bring a magnet with you and see if the rims are aluminum or steel. If they are steel stopping in the rain will be a challenge. I've had a couple of Peugeots and I'm having a little trouble figuring out how old that one is. The lion decal on the head tube was something I thought they used in the 80's. On the other hand it looks like it has cottered cranks which I thought they quit using in the 70s but maybe I'm wrong. Cottered cranks are a pain to work on.
There's a lot of steel parts on it so it's going to weigh at least 30 lbs. However, it should be fine for the distance you're planning on traveling and it sounds like the seller took good care of it. The wheels would be my only concern. My wife's old Peugeot came with steel wheels that had a serrated braking surface. Not only was it tough to stop in the rain, it always made an unpleasant noise while braking until I replaced the wheels. Make sure you ride it and try the brakes out (as well as the shifting and everything else).
There's a lot of steel parts on it so it's going to weigh at least 30 lbs. However, it should be fine for the distance you're planning on traveling and it sounds like the seller took good care of it. The wheels would be my only concern. My wife's old Peugeot came with steel wheels that had a serrated braking surface. Not only was it tough to stop in the rain, it always made an unpleasant noise while braking until I replaced the wheels. Make sure you ride it and try the brakes out (as well as the shifting and everything else).
Last edited by tjspiel; 04-12-14 at 08:10 PM.
#10
Newbie
Thread Starter
Join Date: Apr 2014
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bring a magnet with you and see if the rims are aluminum or steel. If they are steel stopping in the rain will be a challenge. I've had a couple of Peugeots and I'm having a little trouble figuring out how old that one is. The lion decal on the head tube was something I thought they used in the 80's. On the other hand it looks like it has cottered cranks which I thought they quit using in the 70s but maybe I'm wrong. Cottered cranks are a pain to work on.
There's a lot of steel parts on it so it's going to weigh at least 30 lbs. However, it should be fine for the distance you're planning on traveling and it sounds like the seller took good care of it. The wheels would be my only concern. My wife's old Peugeot came with steel wheels that had a serrated braking surface. Not only was it tough to stop in the rain, it always made an unpleasant noise while braking until I replaced the wheels. Make sure you ride it and try the brakes out (as well as the shifting and everything else).
There's a lot of steel parts on it so it's going to weigh at least 30 lbs. However, it should be fine for the distance you're planning on traveling and it sounds like the seller took good care of it. The wheels would be my only concern. My wife's old Peugeot came with steel wheels that had a serrated braking surface. Not only was it tough to stop in the rain, it always made an unpleasant noise while braking until I replaced the wheels. Make sure you ride it and try the brakes out (as well as the shifting and everything else).
#11
Senior Member
Join Date: Mar 2012
Location: southeastern PA - a mile west of Philadelphia
Posts: 430
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Be advised that you can place a magnet directly on an actual aluminum rim only to potentially discover that the rim appears to be attracted by the magnet! Thus, this would seem to suggest that the rim is made of steel when in fact the rim could be made of aluminum with steel joining pins at the rim’s joining seams.
Hence, apply the magnet at various points along the rim to determine the rim’s aluminum or steel composition or you might just coincidentally apply the magnet at its joining seams and detect the steel joining pins and be given a false impression of the rim’s composition. The Bontrager rims on my road bike give this false impression at their seams only (which is precisely where I coincidentally initially tried the magnet trick).
Hence, apply the magnet at various points along the rim to determine the rim’s aluminum or steel composition or you might just coincidentally apply the magnet at its joining seams and detect the steel joining pins and be given a false impression of the rim’s composition. The Bontrager rims on my road bike give this false impression at their seams only (which is precisely where I coincidentally initially tried the magnet trick).
Thread
Thread Starter
Forum
Replies
Last Post
Steely Dan
Commuting
55
02-23-18 04:59 AM