Quick Release Bike Lights
#1
Thread Starter
abides and rides
Joined: Feb 2007
Posts: 471
Likes: 0
Quick Release Bike Lights
I'm currently trying to find some decent lights (one front, one rear) that don't require a permanent mount on the bike and are quick and easy to put on and take off. After looking around a few shops there seem to be a few options for front lights with a quick release clamp/mount, but not much for rear lights.
I'm very tempted to get some of the Knog 5 LED lights (Knog Toad and/or Bullfrog) as the design seems great, and the ease of mounting/removing is perfect for what I want, but they don't really seem like the most effective lights out there.
I'm looking to spend a maximum of around $80USD and just want some compact and effective "to be seen" lights rather than lighting up the whole street. Any suggestions much appreciated.
I'm very tempted to get some of the Knog 5 LED lights (Knog Toad and/or Bullfrog) as the design seems great, and the ease of mounting/removing is perfect for what I want, but they don't really seem like the most effective lights out there.
I'm looking to spend a maximum of around $80USD and just want some compact and effective "to be seen" lights rather than lighting up the whole street. Any suggestions much appreciated.
#2
Senior Member
Joined: Jul 2008
Posts: 1,757
Likes: 0
From: UK
I've got a knog bullfrog.
The switch isn't very well designed and doesn't work reliably.
Light output isn't very high either.
Not one I'd recommend, however other people may have had better luck with them.
It might be worth you looking at cycle lights on DX, a couple of blinkies front and back would probably suit you.
The switch isn't very well designed and doesn't work reliably.
Light output isn't very high either.
Not one I'd recommend, however other people may have had better luck with them.
It might be worth you looking at cycle lights on DX, a couple of blinkies front and back would probably suit you.
#3
I'm currently trying to find some decent lights (one front, one rear) that don't require a permanent mount on the bike and are quick and easy to put on and take off. After looking around a few shops there seem to be a few options for front lights with a quick release clamp/mount, but not much for rear lights.
https://www.amazon.com/Planet-Bike-Bl...lp_edpp_img_in
#4
Thread Starter
abides and rides
Joined: Feb 2007
Posts: 471
Likes: 0
I just want something simple and compact that will be as quick and easy as possible to mount and remove.
#6
Yeah, I really love the mounting system of the Knogs but would like something more effective if I can find it. I've looked on DX and didn't see anything much decent which will quick mount/detatch apart from a quick release mount which could be paired with a torch I suppose.
I just want something simple and compact that will be as quick and easy as possible to mount and remove.
I just want something simple and compact that will be as quick and easy as possible to mount and remove.
https://www.amazon.com/Lock-Blocks-Se...3994830&sr=1-1
The LockBlock attaches with a velcro strap, so it can be removed in about 2 seconds and installed in about 3 seconds.
I haven't tried this one personally, but I've used one of its predecessors. It has a mount that attaches easily with a thumbscrew.
#7
Zoom zoom zoom zoom bonk

Joined: Sep 2006
Posts: 4,939
Likes: 1,005
From: New Zealand
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Trek Marlin 6, Scott Sub 35, Kona Rove, Trek Verve+2
Blackburn flea lights probably fit your needs.

Cateye do a quick release front that is self contained:
EL-450
Cateye do a quick release front that is self contained:
EL-450
#9
Thread Starter
abides and rides
Joined: Feb 2007
Posts: 471
Likes: 0
Get a set of TwoFish LockBlocks and a decent AA LCD flashlight:
https://www.amazon.com/Lock-Blocks-Se...3994830&sr=1-1
The LockBlock attaches with a velcro strap, so it can be removed in about 2 seconds and installed in about 3 seconds.
https://www.amazon.com/Lock-Blocks-Se...3994830&sr=1-1
The LockBlock attaches with a velcro strap, so it can be removed in about 2 seconds and installed in about 3 seconds.
I forgot to mention that I very nearly did buy a set of Fleas, znomit, but after some thought it seemed like the recharge system would end up being really annoying. They seem like very nifty lights though and I reckon I would've bought some if they had an AC recharger instead of the seemingly tedious system that they have.
#10
Thread Starter
abides and rides
Joined: Feb 2007
Posts: 471
Likes: 0
#11
Senior Member
Joined: Jul 2008
Posts: 1,757
Likes: 0
From: UK
Or do you mean that even a quick release light - where the bracket stays on the seatpost or frame - is unacceptable ?
#12
Thread Starter
abides and rides
Joined: Feb 2007
Posts: 471
Likes: 0
#13
You Know!? For Kids!



Joined: Apr 2005
Posts: 6,166
Likes: 29
From: Just NW of Richardson Bike Mart
Bikes: '05 Trek 1200 / '90 Trek 8000 / '? Falcon Europa
The brackets are small and unobtrusive and weigh next to nothing. I have a bracket for my Cateye TL-LD1000 on both my road bikes and I also use a rear light from Trek that clips to a loop on my seat bag.
For a front light, get a P7 or Fenix flashlight and a Two Fish Lock Block mount, which used velcro to secure the light to the mount and the mount to the bars.
You might even be able to use a two fish lock block and a light with a clip to secure a rear light to your seat post or seat stay.
For a front light, get a P7 or Fenix flashlight and a Two Fish Lock Block mount, which used velcro to secure the light to the mount and the mount to the bars.
You might even be able to use a two fish lock block and a light with a clip to secure a rear light to your seat post or seat stay.
__________________
Are you a registered member? Why not? Click here to register. It's free and only takes 27 seconds! Help out the forums, abide by our community guidelines.
Are you a registered member? Why not? Click here to register. It's free and only takes 27 seconds! Help out the forums, abide by our community guidelines.
#14
Senior Member
Joined: Jul 2008
Posts: 1,757
Likes: 0
From: UK
#15
Galveston County Texas
Joined: Nov 2007
Posts: 33,335
Likes: 1,286
From: In The Wind
Bikes: 02 GTO, 2011 Magnum
#16
For the rear light, get a Planet Bike SuperFlash:
https://www.amazon.com/Planet-Bike-Bl...lp_edpp_img_in
https://www.amazon.com/Planet-Bike-Bl...lp_edpp_img_in
PB Spok Set = $25 = no bracket
Last edited by jdmitch; 06-03-09 at 10:17 AM.
#17
Junior Member
Joined: May 2009
Posts: 140
Likes: 0
From: Chandler, AZ
Bikes: Scattante CFR Elite road bike and Schwin mountain bike
I have a Cateye Optiflex headlight. It mounts and removes very quickly and easily. The PlanetBike Blaze headlight also mounts and removes quickly and easily. The Blaze is much brighter and the blink pattern is that same as the SuperFlash taillight. When I got my Catey a couple of years ago it also came with a red lens cover so it could be used as a taillight. I don't know if that is the case now.
#18
To the OP. If you remove the mount each time, you'll have to realign it each time you put it back on. Did you consider that? I leave my lockblocks on the bike and take the lights off when I lock up. If I unmounted them from the handlebar, a lot of the convenience is wasted because I have to re-aim and re-strap them in, and I have 3 of them. Mounts don't weigh anything and unless there's a particular thief about, nobody messes with them.
I've never seen a convenient, non-"fiddly", secure and simple mount that you'd want to reinstall every time you used it. Don't think there is one. You'd probably wear most of them out clamping and unclamping them all the time.
Take a look at mounts that swivel and are of pretty high quality (price) if you want to clamp/reclamp. The Mawri mounts are nice if you can figure out how to attach your particular light.
I've never seen a convenient, non-"fiddly", secure and simple mount that you'd want to reinstall every time you used it. Don't think there is one. You'd probably wear most of them out clamping and unclamping them all the time.
Take a look at mounts that swivel and are of pretty high quality (price) if you want to clamp/reclamp. The Mawri mounts are nice if you can figure out how to attach your particular light.
#19
Also, most light mounting systems are designed to easily break into 2 parts. If you want to completely remove the whole shebang from your bike between uses, you should just glue the two parts together and in a fixed position once you have it aimed. You'll still need to re-aim vertically, though.
Still a bad idea, IMHO.
Still a bad idea, IMHO.
#20
Banned
Joined: Nov 2004
Posts: 10,082
Likes: 1
Sounds like BS fixed gear fashionista aesthetics to me. Don't worry, you won't ruin the 'look' of your bike with a tiny bracket, and your friends will still like you.......
#21
Senior Member
Joined: Jul 2008
Posts: 1,757
Likes: 0
From: UK
#23
Senior Member
Joined: Jul 2008
Posts: 1,757
Likes: 0
From: UK
#24
i should have qualified that with a "good to be seen by" light. you can't see anything with them, but people will see you in most situations.
for seeing by, you need a more serious light with high output.
for seeing by, you need a more serious light with high output.
#25
Just to add a couple of things, one could hang / mount either of these in a number of places:
Glo-Toobs
Krill Lights
Glo-Toobs
Krill Lights




