![]() |
Platform Pedals
5 Attachment(s)
Enough of this clipless crap ... anyone have a recommendation for a no-slip, high-grip platform pedal? The ones on my low bottom bracket recumbent are cheap. No interest in a clipless, this is for recreational riding and I don't have any problems of my feet slipping off of the pedals.
Here are five contenders. The first are the Grip Kings from Rivendell, shown beside a standard MKS pedal. I don't like the two thin lines design of the MKS. Second is Crank Brothers 5050X. Third is the Sun Zu Zu Fourth is the Odyssey triple cage Fifth is the Wellgo MG-1 magnesium pedal |
Does a recumbent eliminate the need to wear soccer shinguards when you use such pedals?
|
I've read comments by others referring to such a thing, but I have never experienced being hit in the shins by a platform pedal.
|
I like the Wellgo MG-1. Appairently so does my youngest son because he took mine to put on one of his bikes. I liked them well enough to buy new. The price is rather high.....................unless one is tempted to........................search Ebay...........................for MG-1..............................and acquire them from Hong Kong...........................:)
Yes indeed says Jimmy "Hong Kong, home of the shiney red pedal" |
Quote:
I'll stick with my SPD's (Safe Pedal Drive). |
Such pedals go under the nickname of "tenderizers".
|
I've got a pair of Kona Jack Sh*t pedals that I like.
|
Do you need these shoes to use those pedals?
|
Quote:
|
Where does your foot go on the Rivendell ones? On the horseshoe part or on the rectangle part?
|
The Rivendell pic is of two pedals. Their new Grip Kings are on the left, the classic MKS platforms are on the right. The image is meant to show how different they are. The Grip Kings are designed to maximize surface contact area.
|
--
|
Quote:
|
Quote:
|
Someone sounds angry. I think that recumbents need a roll cage and then if you fall to the side you just do a gentle roll. Or a good set of training wheels and that baby will never go over. Clipless scares me but I do love having the ability to pull up on a pedal. If I never rode up a hill, I would go back to platform pedals. I have a stationary recumbent with platform pedals and straps. One of the irritating things about riding it is that I have to hold my feet on the pedals or they want to fall off. What I need is a pedal which releases on the voice command of OH @@@@.
|
Speedplay Drilliums are the only way to go. bk
|
1 Attachment(s)
Quote:
They look too sleek and fast for me! |
I've got platforms on my flat-bar road bike too. And my hybrid and my Bridgestone city bike. My feet never slip off of any of them. When I was riding it up hills last week, I never noticed any problem. I have PowerGrips on my hybrid and so when I'm on the backstroke & try to pull up, it does feel like I am applying some upstroke pull. But when I do the same on my platforms, it feels exactly the same. And there is no effect on my speed uphills with or without the PowerGrip straps - even though they do hold my shoes tight to the pedal.
People write that they feel like they have to hold their feet onto the pedals with platforms. I was trying hard to lift my feet off of the pedals, while spinning at around 90 rpm, and was unsuccessful. |
Performance has some nice ones that are on sale - Forte. If you check the web site all of the Crank Brother's Platforms are on sale as well! I have been reading a mountain biking instruction book by Brian Lopes and he recommends learning the basics on platforms instead of clipless. I have stayed with platforms on my touring bike and thought of upgrading to MKS Touring Lites.
http://i229.photobucket.com/albums/e...FortePedal.jpg |
Performance & Nashbar always have those Forte platforms on sale. The sale prices do vary from week to week. In my first post I pictured one of the Crank Brothers pedals that they have on sale ... those are 2007 models that are discontinued and on clearance from many on-line e-tailers.
|
The MG-1's are the lightest of the larger DH style pedals made. They have sealed cartridge bearings. Reviewers seem to think that they have slightly less traction (and therefor are slightly less likely to damage your shins and calves) and are more comfortable to ride. They are however painted (many choices of colors for you OCP/Fred types) and the paint wears off exposing the bare metal underneath rather quickly.
The Ultimate platform pedal though is probably the Shimano PD-MX30 but the price will give you a nosebleed. |
I have the Sun Zu-Zu on my road bike, Donna has the Wellgo's on her mtn bike, I have the Nashbar pedals on my mtn.bike. I like the Sun pedal best out of all of them, because the pedal is more concave and fits the foot better. A vote for the Sun pedals here!
|
Quote:
AND- The lad I did a ride with the tandem on last September recently changed over to SPD's on one of his bikes. He has just bought the second pair for his second bike as he can't ride the bikes without them. |
http://www.performancebike.com/produ...-BLK-ANGLE.jpg
I have these, $24-ish right now from Performance. Not bad at all in the slippage dept. - which is why I bought them. Only problem I've had so far was that one of the screws holding the cleat on decided to become one with the roadside junk somewhere, so I had to re-assemble with lok-tite. I think SmashBar sells this same pedal with their name on it. |
I have a near identical pair of those on my flat bar road bike. But wanted to get something with a bit more stick-tion on my recumbent, as I don't have much weight over the pedals on it.
|
Quote:
|
I've read many threads on the various clipless types. Is there any such beast as a clipless that barely clips you in? Something that would exist primarily to keep your foot in place as you spin, but your shoe could pop out of easily - even in the middle of falling over. Where it would barely let you pull up on the upstroke before it would pop off?
The platforms with pins, such as the Sun Zu-Zu, Wellgo MG-1, and Speedplays act much this way to me. My foot stays in place ... but it doesn't necessarily mean it is in the right place. My PowerGrips are the closest thing I've found to a clipped-in experience that has a very easy out. Frankly, I like something that is even easier to get out of than them. |
Step right up ladies and gentlemen. Take a good look at the 21st century unclipped clipless pedals. This new invention has revolutionized (got it) the art of spinning you feet around in circles. Not SPD's, not Frogs, no.......nothing so crass as a mechanical attachment.
Magnets.............the power of the universe. Little electromagnets powered by the dynamo in your hub. The faster you go, the tighter your feet are attached to the bicycle yet.............when you are slowed down by pesky traffic.............you feet almost fall off of their own accord. Hey.......don't touch the product kid.........that's the only working model this side of the Mississippi. Once sold under the famous Dura-A** label and now liscensed to SCRAM, these babies weigh but a few grams and cost less than an ABM missle system. Step right up, plonk down a 10% handling charge and get on the reservation list for your very own set. Hey.........kid...........I told you not to touch the product.......................... Step right up everyone.......................... |
Where can I buy them?
|
I'm about to install those strapless plastic toe clips on one of my bikes to try that system out. Picked up a pair for $6.
|
| All times are GMT -6. The time now is 08:24 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.