Getting ready to prime!
04-26-20 | 01:53 PM
#1
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 2,905
Likes: 248
From: NE Ohio
Bikes: 1992 Serotta Colorado II,Co-Motion Speedster, Giant Escape Hybrid, 1977 Schwinn Super Le Tour
Getting ready to prime!
Sandblasted the frame and fork and just mixed up the primer. It requires about 45 minutes to incubate. Then it is time to spray!
Getting closer!!!
Getting closer!!!
04-26-20 | 09:34 PM
#4
Senior Member
Joined: Feb 2012
Posts: 19,344
Likes: 5,461
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Tom- So what paint are you using? Andy
__________________
AndrewRStewart
AndrewRStewart
04-27-20 | 04:59 AM
#5
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 2,905
Likes: 248
From: NE Ohio
Bikes: 1992 Serotta Colorado II,Co-Motion Speedster, Giant Escape Hybrid, 1977 Schwinn Super Le Tour
I am using Nason Chromabase. There is a Auto paint store about 30 minutes away and they have been very helpful. I have used this on 3 other frames.
04-27-20 | 07:52 AM
#6
Senior Member
Joined: Feb 2012
Posts: 19,344
Likes: 5,461
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Tom- I believe this paint is pretty much the same family of chemistry that I have chosen for my lathe and the frame that will use the Lug Making Part Dux efforts. It looks like you're spraying from their rattle cans? I'll be brushing on mine. Andy
__________________
AndrewRStewart
AndrewRStewart
