How I build some lugged frames
01-07-10 | 03:25 PM
#1
Thread Starter
Tell it as it is
Joined: Nov 2005
Posts: 70
Likes: 0
From: in a cave
Bikes: ones that I ride
How I build some lugged frames
my first set of new Custodian lugs {stainless} being used in a frame I will take to NAHBS
__________________
it's steel
it's lugs
let the others get on with the madness
www.llewellynbikes.com
www.framebuilders.org
it's steel
it's lugs
let the others get on with the madness
www.llewellynbikes.com
www.framebuilders.org
01-08-10 | 02:26 PM
#4
Thread Starter
Tell it as it is
Joined: Nov 2005
Posts: 70
Likes: 0
From: in a cave
Bikes: ones that I ride
Always, I am not a fan of stays plonked on the sides.
Got to use plugs and mitre them into the seat lug when doing a stainless lug atmco
Got to use plugs and mitre them into the seat lug when doing a stainless lug atmco
__________________
it's steel
it's lugs
let the others get on with the madness
www.llewellynbikes.com
www.framebuilders.org
it's steel
it's lugs
let the others get on with the madness
www.llewellynbikes.com
www.framebuilders.org
01-08-10 | 03:04 PM
#5
Thread Starter
Tell it as it is
Joined: Nov 2005
Posts: 70
Likes: 0
From: in a cave
Bikes: ones that I ride
Eric, this is a new Dazza designed and produced lug set for OS tubes.
The "Custodian"
I wanted more curves than Nigella Lawson but still be able to be trimmed down to Kylie Minogue if desired.
Seat tube shelf in the stainless lugs to avoid the need for making a stainless bit of tube to sit on top of the seat tube and be rid of the exposed silver line.
Nomal steel lugs will be supplied with a pass through seat tube}
M6 Caphead seat post binder, any thing else is silly and a pain.
Cast M5 gear bosses, rounded seat post binger key hole slot to avoid seat post damage. I just had to have lugs with all the features that we should use in the 21st Century.
Cheers Dazza
The "Custodian"
I wanted more curves than Nigella Lawson but still be able to be trimmed down to Kylie Minogue if desired.
Seat tube shelf in the stainless lugs to avoid the need for making a stainless bit of tube to sit on top of the seat tube and be rid of the exposed silver line.
Nomal steel lugs will be supplied with a pass through seat tube}
M6 Caphead seat post binder, any thing else is silly and a pain.
Cast M5 gear bosses, rounded seat post binger key hole slot to avoid seat post damage. I just had to have lugs with all the features that we should use in the 21st Century.
Cheers Dazza
__________________
it's steel
it's lugs
let the others get on with the madness
www.llewellynbikes.com
www.framebuilders.org
it's steel
it's lugs
let the others get on with the madness
www.llewellynbikes.com
www.framebuilders.org
Last edited by Silverbraze; 01-08-10 at 03:08 PM.
