Bike Forums
it's got a serial number for anyone who can decypher
it's got a serial number for anyone who can decypher
0 2024/02/14 10:11:04
interesting to mix the Nervex Pro lugs with this modern fork crown
interesting to mix the Nervex Pro lugs with this modern fork crown
0 2024/02/14 10:08:19
crowsfoot front spoke lacing?
crowsfoot front spoke lacing?
0 2024/02/14 10:08:18
0 2024/02/14 10:08:16
BB too wide for this shell?
BB too wide for this shell?
0 2024/02/14 10:07:32
usually see this shifter boss on Italian frames
usually see this shifter boss on Italian frames
0 2024/02/14 10:06:48
0 2024/02/01 20:49:18
washer is part #4473 in the green circle
washer is part #4473 in the green circle
0 2024/01/31 14:30:03
very small and grainy but you get the drift and the diff
very small and grainy but you get the drift and the diff
0 2024/01/31 11:09:28
0 2024/01/29 10:41:07
0 2024/01/29 10:41:06
0 2024/01/29 10:41:05
0 2024/01/29 10:41:04
0 2024/01/29 10:41:03
0 2024/01/29 10:41:02
0 2024/01/29 10:41:01
0 2024/01/29 10:41:00
0 2024/01/29 10:40:59
0 2024/01/29 10:40:57
it looks better than my camera will record
it looks better than my camera will record
0 2024/01/20 15:57:47
weather poor so lighting doesn't give a best results but this looks better "in person"
weather poor so lighting doesn't give a best results but this looks better "in person"
0 2024/01/20 08:38:16
same deal on opposite side, next going to wipe the raw steel with alcohol and make ready for the pen (but ambient weather is too wet and cold so that's going to be in a day or two)
same deal on opposite side, next going to wipe the raw steel with alcohol and make ready for the pen (but ambient weather is too wet and cold so that's going to be in a day or two)
0 2024/01/19 14:41:11
one side with 2 more levels sanded with wet/dry paper then gray 3M pad, it's not "perfect" but I consider it "smooth enough" for this fork
one side with 2 more levels sanded with wet/dry paper then gray 3M pad, it's not "perfect" but I consider it "smooth enough" for this fork
0 2024/01/19 14:39:09
0 2024/01/19 14:37:05
I stripped the crummy dull aluminum-looking paint off this once-chrome-plated CIOCC crown so it's not exactly the "before" pic, but this is one side with rough sanding
I stripped the crummy dull aluminum-looking paint off this once-chrome-plated CIOCC crown so it's not exactly the "before" pic, but this is one side with rough sanding
0 2024/01/19 14:33:48
looks OK here and the rest of the assembly does too
looks OK here and the rest of the assembly does too
0 2024/01/17 11:36:44
no better from this side
no better from this side
0 2024/01/17 11:36:42
how does THAT happen?
how does THAT happen?
0 2024/01/17 11:36:41
need only these two parts
need only these two parts
0 2024/01/17 11:36:19
0 2024/01/12 09:50:40
0 2024/01/12 09:07:10
0 2024/01/12 08:43:48
cage wear
cage wear
0 2024/01/12 08:43:47
logo in the clamp casting on these 810s, not pad-printed
logo in the clamp casting on these 810s, not pad-printed
0 2024/01/12 08:43:46
0 2024/01/12 08:43:45
0 2024/01/12 08:43:44
yes it has that adapter plate!
yes it has that adapter plate!
0 2024/01/12 08:31:12
some wear to inner cage and to pulley teeth
some wear to inner cage and to pulley teeth
0 2024/01/12 08:31:11
0 2024/01/12 08:31:10
pinstripe cage from 851?
pinstripe cage from 851?
0 2024/01/12 08:31:09
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.