Bike Forums
1953 GH6 front, refurbished. Disconnected but working. Will include washers that press on the Dynohub to activate it.
1953 GH6 front, refurbished. Disconnected but working. Will include washers that press on the Dynohub to activate it.
0 2020/10/30 13:22:33
1953 AW Rear, refurbished
1953 AW Rear, refurbished
0 2020/10/30 13:22:27
GB Sports Hiduminium brakes, replacements for what was on the bike when I got it.
GB Sports Hiduminium brakes, replacements for what was on the bike when I got it.
0 2020/10/30 13:22:23
CB Clapham transfer on downtube, with Bonderized decal above.
CB Clapham transfer on downtube, with Bonderized decal above.
0 2020/10/30 13:22:17
Bronze fillet brazing exposed with age.
Bronze fillet brazing exposed with age.
0 2020/10/30 13:22:11
"Built Especially for Colson by Claude Butler of London" Original Brampton crankset. 501 pedals, made in England.
"Built Especially for Colson by Claude Butler of London" Original Brampton crankset. 501 pedals, made in England.
0 2020/10/30 13:22:04
0 2020/10/30 13:21:58
0 2020/10/30 13:21:51
Wheels could use some time in the stand. Tires are Kenda Comfort.
Wheels could use some time in the stand. Tires are Kenda Comfort.
0 2020/10/30 13:21:43
Paint was derusted and protected by boiled linseed oil, which you can refresh periodically or wash off and start again.
Paint was derusted and protected by boiled linseed oil, which you can refresh periodically or wash off and start again.
0 2020/10/30 13:21:34
0 2020/10/28 21:33:55
0 2020/10/28 21:33:46
0 2020/10/28 20:19:49
0 2020/10/28 20:19:41
0 2020/10/28 20:18:19
0 2020/10/28 20:18:06
0 2020/10/11 19:17:35
0 2020/10/11 19:17:20
0 2020/10/11 19:17:07
"Especially Built for [Colson logo] by Claud Butler of London, England"
"Especially Built for [Colson logo] by Claud Butler of London, England"
0 2020/10/01 12:56:30
Dunlop chrome steel wheels. Tires are Kenda Comfort.
Dunlop chrome steel wheels. Tires are Kenda Comfort.
0 2020/10/01 12:17:03
0 2020/10/01 12:16:58
0 2020/10/01 12:16:50
0 2020/10/01 12:16:44
0 2020/10/01 12:14:06
Cleaning exposed the bronze at the joints. Not sure why the paint is more vulnerable there, but it looks kind of cool to highlight the workmanship.
Cleaning exposed the bronze at the joints. Not sure why the paint is more vulnerable there, but it looks kind of cool to highlight the workmanship.
0 2020/10/01 12:13:59
0 2020/10/01 12:13:53
"Especially Built for [Colson Logo] by Claud Butler, London
"Especially Built for [Colson Logo] by Claud Butler, London
0 2020/10/01 12:13:44
October 1, 2020
October 1, 2020
0 2020/10/01 11:46:14
September 1, 2020
September 1, 2020
0 2020/10/01 11:45:48
0 2020/09/19 11:39:50
And, voila! Sits nicely at the rim. I'll either buy or mill down something as a permanent fix.
And, voila! Sits nicely at the rim. I'll either buy or mill down something as a permanent fix.
0 2020/09/19 10:16:16
Inspired by those concave/convex washers but not having a set handy, I made these, just to see if it would angle the pads enough.
Inspired by those concave/convex washers but not having a set handy, I made these, just to see if it would angle the pads enough.
0 2020/09/19 10:15:52
0 2020/09/18 22:57:48
0 2020/09/18 22:57:30
0 2020/09/18 22:54:43
Well, damn. These beautiful brakes a a bit long. I can get just over half the pad on the rim as they sit now.
Well, damn. These beautiful brakes a a bit long. I can get just over half the pad on the rim as they sit now.
0 2020/09/18 22:54:18
If an E10 LED fits, shouldn't I just do that? The rear lamp was trashed when I got the bike, so for now I've just tucked the wire away behind the bracket.
If an E10 LED fits, shouldn't I just do that? The rear lamp was trashed when I got the bike, so for now I've just tucked the wire away behind the bracket.
0 2020/09/18 20:48:45
How do people position these shifters? The engraving seems to assume it will sit upside down from this. Also, this is set up for 3 or 4 speeds, so I'm not sure what position to use as 2 when setting it up.
How do people position these shifters? The engraving seems to assume it will sit upside down from this. Also, this is set up for 3 or 4 speeds, so I'm not sure what position to use as 2 when setting it up.
0 2020/09/18 20:22:13
0 2020/09/18 20:16:39
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.