32 vs 36 Spokes?
#1
Full Member
Thread Starter
32 vs 36 Spokes?
I just read about 1000 posts on this time worn subject, and to my surprise, not one person mentioned anything about aerodynamics.
Everything else is mentioned, "how much do you weigh? how much weight do you carry? are you using aluminum nipples, a wheel is only as good as it's builder, the hub, spokes, rims, and ties comprise the total system, 36 spokes ride smoother, 32 spokes are rigid, 36 spokes are stronger, 32 spokes are lighter, are you using 3 cross or 4 cross? are you using stainless, are you using double butted, are you using DT? how much spoke tension? "
on and on.
what is the real reason for using 32 over 36?
wind!
not one person out of all those posts got this.
turn your bike upside down and put it in the biggest gear.
crank the pedals as fast as you can.
what limits the speed you can achieve?
wind. the wheel turns into a fan at higher speeds.
the less spokes, the less fan effect. this is the reason for disc wheels.
my question is, what are the power savings when using 32 over 36? is there a percentage figure out there?
thanks for any help.
Everything else is mentioned, "how much do you weigh? how much weight do you carry? are you using aluminum nipples, a wheel is only as good as it's builder, the hub, spokes, rims, and ties comprise the total system, 36 spokes ride smoother, 32 spokes are rigid, 36 spokes are stronger, 32 spokes are lighter, are you using 3 cross or 4 cross? are you using stainless, are you using double butted, are you using DT? how much spoke tension? "
on and on.
what is the real reason for using 32 over 36?
wind!
not one person out of all those posts got this.
turn your bike upside down and put it in the biggest gear.
crank the pedals as fast as you can.
what limits the speed you can achieve?
wind. the wheel turns into a fan at higher speeds.
the less spokes, the less fan effect. this is the reason for disc wheels.
my question is, what are the power savings when using 32 over 36? is there a percentage figure out there?
thanks for any help.
#2
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,685
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 4423 Post(s)
Liked 4,068 Times
in
2,714 Posts
Most of the time when we are talking wheels with those numbers of spokes we are typically talking to someone looking for a heavier duty wheel so strength and such is more important than aerodynamics.
Yes the point you have brought up is not a bad one but honestly most people aren't worried about the "fan" effect on a 36h wheel and if they are they probably aren't riding a 36 or higher spoke count wheel.
I don't know what the power savings would be and I doubt it would be an easy calculation as a heavier wheel could act as a flywheel as you get higher speeds but would be slower at lower speeds (plus a host of other factors)
Yes the point you have brought up is not a bad one but honestly most people aren't worried about the "fan" effect on a 36h wheel and if they are they probably aren't riding a 36 or higher spoke count wheel.
I don't know what the power savings would be and I doubt it would be an easy calculation as a heavier wheel could act as a flywheel as you get higher speeds but would be slower at lower speeds (plus a host of other factors)
Likes For veganbikes:
#3
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,652
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3906 Post(s)
Liked 6,517 Times
in
3,229 Posts
Sheldon taught me to use 32 in the front, 36 in the rear.
Likes For SurferRosa:
#4
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
This clearly explains why my ceiling fan has 5 blades instead of 30.
Likes For Cyclist0108:
#5
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,347
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3907 Post(s)
Liked 4,859 Times
in
2,241 Posts
I use the number of spokes the hub dictates.
Standard classic wheel - around riding without worrying about truing = 36 spokes is best for my 190unaerodynamicpounds
Lighter weight classic wheelset = 32
classic tandem wheelset = Phil w/ 40 spokes.to extra sturdy rims
But isn't 32+ spokes kinda mute
I thought everyone was running 20/24/28 spoke wheels in mid&high level road bikes. And the Urban category.
edit: is this the mtb forum?
Standard classic wheel - around riding without worrying about truing = 36 spokes is best for my 190unaerodynamicpounds
Lighter weight classic wheelset = 32
classic tandem wheelset = Phil w/ 40 spokes.to extra sturdy rims
But isn't 32+ spokes kinda mute
I thought everyone was running 20/24/28 spoke wheels in mid&high level road bikes. And the Urban category.
edit: is this the mtb forum?
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 03-14-21 at 11:44 PM.
Likes For Wildwood:
#6
Luke
I am struggling to understand why anyone riding 36 or 32 spoke wheels for that matter are concerned about aerodynamics at all.
The difference between 2.0/1.5/2.0 spokes and bladed spokes such as aerolites on a 24h shallow alloy (long spokes) wheel is <<<<1w iirc. Like negligible difference. How wide open your mouth is would have a bigger difference.
Point being the difference between a thin db spoke like a rev/laser etc^^ and a slightly (relatively) wider spoke like sg champions etc would be less than the previous delta most likely.
I do not think there will be any tangible difference other than placebo, but the rule of thumb is for every +4 spokes, you double the fatigue life of the wheel (or spokes) which to me is more important especially if you already have 32 spokes nowadays
What rims are you using? Are you racing?
ride yo bike
The difference between 2.0/1.5/2.0 spokes and bladed spokes such as aerolites on a 24h shallow alloy (long spokes) wheel is <<<<1w iirc. Like negligible difference. How wide open your mouth is would have a bigger difference.
Point being the difference between a thin db spoke like a rev/laser etc^^ and a slightly (relatively) wider spoke like sg champions etc would be less than the previous delta most likely.
I do not think there will be any tangible difference other than placebo, but the rule of thumb is for every +4 spokes, you double the fatigue life of the wheel (or spokes) which to me is more important especially if you already have 32 spokes nowadays
What rims are you using? Are you racing?
ride yo bike
Likes For FTB:
#7
I’m a little Surly
Join Date: Jan 2010
Location: Near the district
Posts: 2,423
Bikes: Two Cross Checks, a Karate Monkey, a Disc Trucker, and a VO Randonneur
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 699 Post(s)
Liked 1,297 Times
in
648 Posts
I'll second that the folks thinking 32/36 spoke wheels aren't much concerned with aero, in my case I ride 36 because I have bags all over my bike.
Likes For Germany_chris:
#8
Senior Member
Join Date: Sep 2017
Posts: 7,976
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 7053 Post(s)
Liked 11,106 Times
in
4,742 Posts
In my experience, one broken spoke slows me down much more than four extra spokes.
Likes For Koyote:
#9
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,443
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 3,014 Times
in
1,935 Posts
the air drag from your legs might be greater than the drag produced by the amount of spokes.
buy 36 holes rims, use 28 spokes. Potential durability of a 36 holed wheel, but with the weight savings using less spokes.
buy 36 holes rims, use 28 spokes. Potential durability of a 36 holed wheel, but with the weight savings using less spokes.
__________________
-Oh Hey!
-Oh Hey!
#10
Senior Member
Join Date: Sep 2017
Posts: 7,976
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 7053 Post(s)
Liked 11,106 Times
in
4,742 Posts
#11
Senior Member
Join Date: Oct 2018
Location: VA
Posts: 1,437
Bikes: SuperSix Evo | Revolt
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 733 Post(s)
Liked 815 Times
in
414 Posts
24/24 on my road wheels, 24/28 on my gravel wheels. I'm 185lbs and ride hard, no issues.
And yes, more spokes does equal more drag, found a test showing 20 bladed spokes saving about 10w over 32 round spokes.
And yes, more spokes does equal more drag, found a test showing 20 bladed spokes saving about 10w over 32 round spokes.
#12
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,459
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3130 Post(s)
Liked 2,111 Times
in
1,374 Posts
I thought the reason to choose 32h is that it's getting really hard to find 36h
__________________
Genesis 49:16-17
Genesis 49:16-17
#13
Senior Member
Likes For asgelle:
#14
Banned
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924
Bikes: RANS Stratus TerraTrike Tour II
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 3352 Post(s)
Liked 1,056 Times
in
635 Posts
First of all I find it VERY hard to believe that 4 more spokes are going to cause that much more drag.
Second, does anyone have the specs that show that with the same style rim and hub what the max load a wheel can carry with both 32 and 36 spokes.
Second, does anyone have the specs that show that with the same style rim and hub what the max load a wheel can carry with both 32 and 36 spokes.
Likes For rydabent:
#15
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,443
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 3,014 Times
in
1,935 Posts
These "tests" of drag are done in a stationary state. Put the real world test to spoke count using the same person, same everything else, but swap out the wheels for just a different number of spokes.
__________________
-Oh Hey!
-Oh Hey!
#16
Senior Member
#17
Senior Member
Join Date: Sep 2017
Posts: 7,976
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 7053 Post(s)
Liked 11,106 Times
in
4,742 Posts
It's not a "false dichotomy."
If you were a serious racer, you'd have a leg amputated -- the aero benefits are indisputable.
#18
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,443
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 3,014 Times
in
1,935 Posts
#19
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,829
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1950 Post(s)
Liked 2,188 Times
in
1,332 Posts
If I decide to use my bike as a fan instead of the A/C this Summer, I’ll let you know how much savings I get off my electric bill. I’ll use a 32 spoke wheel in July and a 36 spoke wheel in August.
John
John
#20
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,443
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 3,014 Times
in
1,935 Posts
#21
Senior Member
Join Date: Jul 2007
Posts: 7,570
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1852 Post(s)
Liked 679 Times
in
430 Posts
(Note: I've got a set of 32-hole hubs on order. Going with 13mm deep and 21mm wide rims - cause aerodynamics don't matter for this wheelset.)
#22
Senior Member
Join Date: Jul 2009
Posts: 5,996
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 3978 Post(s)
Liked 7,422 Times
in
2,986 Posts
The best overall wheel performance is obtained when the number of spokes is a prime number. I suggest 31 in the front and 37 in the back.
Likes For tomato coupe:
#23
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,088
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6253 Post(s)
Liked 4,853 Times
in
3,345 Posts
cjenrick maybe you can do a study and enlighten us. I've never cared that much myself. But if it turns out to be a game changer who knows where and what level the bickering might get too.
#24
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,347
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3907 Post(s)
Liked 4,859 Times
in
2,241 Posts
Not to change the discussion away from 32 or 36 spokes,
BUT
if the subject is aerodynamics -
Shouldn't the feedback move toward rims and their shape, with tire width as a factor ('oh, i ride faster on 38s, cause the front tire wake breaks the air for my knees!' )
edit: maybe that high cadence pedaling is enough to slow you down!
Clear your handlebars, and your aerodynamics and Mind will follow!
BUT
if the subject is aerodynamics -
Shouldn't the feedback move toward rims and their shape, with tire width as a factor ('oh, i ride faster on 38s, cause the front tire wake breaks the air for my knees!' )
edit: maybe that high cadence pedaling is enough to slow you down!
Clear your handlebars, and your aerodynamics and Mind will follow!
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 03-15-21 at 01:06 PM.
Likes For Wildwood:
#25
Senior Member
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,888
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1463 Post(s)
Liked 1,487 Times
in
871 Posts
Do people buying 32 or 36 spoke wheels really care about the aerodynamic differences?
This feels a bit like debating lap times of various cargo vans.
This feels a bit like debating lap times of various cargo vans.
Likes For msu2001la: