98' Lemond Zurich Rebuild
#1
Newbie
Thread Starter
Join Date: Aug 2022
Location: Ohio
Posts: 13
Bikes: 2017 Surly Cross Check, 1998 Lemond Zurich (frame only)
Likes: 0
Liked 0 Times
in
0 Posts
98' Lemond Zurich Rebuild
Hello,
Was recently handed down an old Lemond Zurich frame from a friend. I've never built up a bike before, but I will have some help from someone who has done it a lot but I need to acquire all the components first. I have two main questions:
1) this was a 2x9 speed when it was first manufactured. Most newer road bikes I've seen are 10-11, and the components meet those specs. Is it possible and advisable to put 2x10 on this bike? In general, do I have some latitude in slightly diverging from the stock build specs on this frame?
2) can anyone definitively say that 700c x 28mm tires have enough clearance for this frame?
Any additional advice from folks that have experience with these frames are welcomed. The price was right (free) and it's a beautiful frame, but building up a bike wasn't something I anticipated doing.
Thanks in advance.
Was recently handed down an old Lemond Zurich frame from a friend. I've never built up a bike before, but I will have some help from someone who has done it a lot but I need to acquire all the components first. I have two main questions:
1) this was a 2x9 speed when it was first manufactured. Most newer road bikes I've seen are 10-11, and the components meet those specs. Is it possible and advisable to put 2x10 on this bike? In general, do I have some latitude in slightly diverging from the stock build specs on this frame?
2) can anyone definitively say that 700c x 28mm tires have enough clearance for this frame?
Any additional advice from folks that have experience with these frames are welcomed. The price was right (free) and it's a beautiful frame, but building up a bike wasn't something I anticipated doing.
Thanks in advance.
#2
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,961
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Liked 7,968 Times
in
4,420 Posts
It is modern enough that any curent/recent mechanical road drivetrain will work. 8, 9, 10, 11sp- all fine.
Pick the one you want and just make sure all components are compatible.
As for tires, use a hex wrench to check the space between the frame and tires at the chainstays, seat tube, brake bridge, and fork crown. You need to keep at least a few mm of space all around the tire to account for road debris, wheel wobble, etc.
Pick the one you want and just make sure all components are compatible.
As for tires, use a hex wrench to check the space between the frame and tires at the chainstays, seat tube, brake bridge, and fork crown. You need to keep at least a few mm of space all around the tire to account for road debris, wheel wobble, etc.
#3
Senior Member
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,859
Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv
Likes: 0
Liked 816 Times
in
474 Posts
You've got a very nice frame. Be good to it.
While, on a practical basis, there isn't a whole lot of difference between a 9 and 10 speed bike, like nearly none, as mstateglfr mentions, 8-11 will work, but keep an eye on component compatibility. You mention a frame..did you receive any components with the frame? You'll find that building a bike up can cost a few bucks. If you have, for example, a set of shifters that came with the frame..that may determine how you want to proceed.
With respect to 28mm tires..I have two Lemond road bikes, an '01 and an '02, and they both can run "28mm" tires (Panaracer GravelKing Slicks). The '02 is a titanium frame and 28s just nicely fit. The other frame, steel, fits 28s just fine. GK slicks are known to run a bit small (I've measured 26.7mm on H Plus Son Archetype rims). Tires in general can run slightly different sizes on different wheels.
jamesdak has a couple pre-2000 Lemonds, I think, and may know better on tires sizes for a '98.
While, on a practical basis, there isn't a whole lot of difference between a 9 and 10 speed bike, like nearly none, as mstateglfr mentions, 8-11 will work, but keep an eye on component compatibility. You mention a frame..did you receive any components with the frame? You'll find that building a bike up can cost a few bucks. If you have, for example, a set of shifters that came with the frame..that may determine how you want to proceed.
With respect to 28mm tires..I have two Lemond road bikes, an '01 and an '02, and they both can run "28mm" tires (Panaracer GravelKing Slicks). The '02 is a titanium frame and 28s just nicely fit. The other frame, steel, fits 28s just fine. GK slicks are known to run a bit small (I've measured 26.7mm on H Plus Son Archetype rims). Tires in general can run slightly different sizes on different wheels.
jamesdak has a couple pre-2000 Lemonds, I think, and may know better on tires sizes for a '98.
#4
Senior Member
Join Date: Jun 2005
Location: Kentucky
Posts: 2,651
Bikes: 06 Lemond Reno, 98 GT Timberline mtn.bike
Liked 759 Times
in
467 Posts
I ride a '06 LeMond Reno. The Zurich is spec'd with 25's, as is my Reno. I have Michelin Pro 4 tires- 25's-on it which leaves 3/8" clearance to the seat tube. Now, those tires actually measured out to 28, so if your geometry is similar, could use 28's-if the tires you use are true to size. BTW-that is a very nice frame! Have fun building iit up.
#5
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,192
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Liked 1,550 Times
in
858 Posts
As stated above, you have a very nice frame set. I have a 2001 Lemond Tourmalet and a 2002 Poprad, I love riding both of them. The Tourmalet, I believe has about the same geometry as the Zurich, but I am not sure about any difference in the forks. My Tourmalet with the stock unicrown, steel fork fits 28mm, all brands I have tried, with no problem. I switched from threaded to threadless set up with a carbon fiber fork, it still fits the 28 mm I have tried on it, but the clearance is barely enough, maybe not enough for some. The Poprad is a CX bike, ergo, very different geometry and clearance. I actually ride the Poprad more due to being able to fit up to true 33mm tires. Knowing how much space you have to work with is definitely a help in deciding on tires, but brands very substantially in width. Also, with some forks, it is the fork crown or brake caliper that is the limiting factor, not the fork legs. The wheels are another factor in actual tire width. Unfortunately, without input from someone that has tried the specific tire, wheel, bike set up, it is a bit of guessing and trial and error.
Building a bike for the first time is a challenge, especially if you are as mechanically challenged as I am. It can be more costly than one anticipates, in particularly if one is set on specific items. It can also be frustrating at times. However, for me. when I finish a bike and all is operating as it should, the bike looks good and close to what I had pictured; it is high in satisfaction, feeling of accomplishment, and the real reward is a fine riding bike that you put together.
Building a bike for the first time is a challenge, especially if you are as mechanically challenged as I am. It can be more costly than one anticipates, in particularly if one is set on specific items. It can also be frustrating at times. However, for me. when I finish a bike and all is operating as it should, the bike looks good and close to what I had pictured; it is high in satisfaction, feeling of accomplishment, and the real reward is a fine riding bike that you put together.
#6
Senior Member
Join Date: Jan 2013
Posts: 2,815
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 672 Times
in
461 Posts
Congratulations, I own a '98 Zurich with the classic red with white panels on the terrific Reynolds 853 frame and it came with 25mm but I now ride 28mm. You have a 130mm dropout spacing so as said any 8 to 11 speed groupset/wheels will nicely fit. I found the stock 2x9 Shimano Ultegra 6500 groupset flawless but parts always get harder to find with older groupsets.
Likes For easyupbug:
#7
Newbie
Thread Starter
Join Date: Aug 2022
Location: Ohio
Posts: 13
Bikes: 2017 Surly Cross Check, 1998 Lemond Zurich (frame only)
Likes: 0
Liked 0 Times
in
0 Posts
Congratulations, I own a '98 Zurich with the classic red with white panels on the terrific Reynolds 853 frame and it came with 25mm but I now ride 28mm. You have a 130mm dropout spacing so as said any 8 to 11 speed groupset/wheels will nicely fit. I found the stock 2x9 Shimano Ultegra 6500 groupset flawless but parts always get harder to find with older groupsets.
This is where my novice experience shows. Are putting more recent 10 speed group sets (e.g. Tiagra 4700) risky for this frame? I'd love to find the original group set, but as you indicated that may be challenging. Is there anything in particular I should pay attention to when looking at newer components? The majority of the responses on this thread have been unanimous on ensuring that all the components fit with another, but are there any considerations for newer grouppos on this frame?
#8
Newbie
Thread Starter
Join Date: Aug 2022
Location: Ohio
Posts: 13
Bikes: 2017 Surly Cross Check, 1998 Lemond Zurich (frame only)
Likes: 0
Liked 0 Times
in
0 Posts
You've got a very nice frame. Be good to it.
While, on a practical basis, there isn't a whole lot of difference between a 9 and 10 speed bike, like nearly none, as mstateglfr mentions, 8-11 will work, but keep an eye on component compatibility. You mention a frame..did you receive any components with the frame? You'll find that building a bike up can cost a few bucks. If you have, for example, a set of shifters that came with the frame..that may determine how you want to proceed.
With respect to 28mm tires..I have two Lemond road bikes, an '01 and an '02, and they both can run "28mm" tires (Panaracer GravelKing Slicks). The '02 is a titanium frame and 28s just nicely fit. The other frame, steel, fits 28s just fine. GK slicks are known to run a bit small (I've measured 26.7mm on H Plus Son Archetype rims). Tires in general can run slightly different sizes on different wheels.
jamesdak has a couple pre-2000 Lemonds, I think, and may know better on tires sizes for a '98.
While, on a practical basis, there isn't a whole lot of difference between a 9 and 10 speed bike, like nearly none, as mstateglfr mentions, 8-11 will work, but keep an eye on component compatibility. You mention a frame..did you receive any components with the frame? You'll find that building a bike up can cost a few bucks. If you have, for example, a set of shifters that came with the frame..that may determine how you want to proceed.
With respect to 28mm tires..I have two Lemond road bikes, an '01 and an '02, and they both can run "28mm" tires (Panaracer GravelKing Slicks). The '02 is a titanium frame and 28s just nicely fit. The other frame, steel, fits 28s just fine. GK slicks are known to run a bit small (I've measured 26.7mm on H Plus Son Archetype rims). Tires in general can run slightly different sizes on different wheels.
jamesdak has a couple pre-2000 Lemonds, I think, and may know better on tires sizes for a '98.
#9
Senior Member
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,859
Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv
Likes: 0
Liked 816 Times
in
474 Posts
It looks like the '98 model was Ultegra throughout. 9 speed Ultegra stuff (6500 series) is still easy to find on ebay. Shifters, front and rear derailleurs, hubs... I haven't looked for a crank lately so no idea there. Cassettes and chains are no issue. Rim brake wheelsets are available (try Velomine or Bicycle Wheel Warehouse. Velomine has high demand and sells out of various wheelsets quite often. Their inventory changes over time so you need to keep an eye on it). No idea on the cost of 10sp vs 9sp..haven't looked at 10sp stuff. Nothing these days is overly cheap. There's a seller (ezbikestore) on ebay for complete Jagwire cable sets at less than $25.
https://www.vintage-trek.com/Trek-Fis...1998lemond.pdf
If you're buying a built wheelset, make sure you appreciate the difference in sound (noise) a rear hub makes. Shimano is quiet, many others are quite noisy. Pick your preference.
https://www.vintage-trek.com/Trek-Fis...1998lemond.pdf
If you're buying a built wheelset, make sure you appreciate the difference in sound (noise) a rear hub makes. Shimano is quiet, many others are quite noisy. Pick your preference.
Last edited by fishboat; 08-08-22 at 10:13 AM.
#10
Senior Member
Join Date: Jan 2013
Posts: 2,815
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 672 Times
in
461 Posts
#11
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,602
Bikes: 2023 Niner RLT 9 RDO, 2022 Trek Supercaliber, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Liked 8,907 Times
in
4,181 Posts
Thanks!
This is where my novice experience shows. Are putting more recent 10 speed group sets (e.g. Tiagra 4700) risky for this frame? I'd love to find the original group set, but as you indicated that may be challenging. Is there anything in particular I should pay attention to when looking at newer components? The majority of the responses on this thread have been unanimous on ensuring that all the components fit with another, but are there any considerations for newer grouppos on this frame?
This is where my novice experience shows. Are putting more recent 10 speed group sets (e.g. Tiagra 4700) risky for this frame? I'd love to find the original group set, but as you indicated that may be challenging. Is there anything in particular I should pay attention to when looking at newer components? The majority of the responses on this thread have been unanimous on ensuring that all the components fit with another, but are there any considerations for newer grouppos on this frame?
A Zurich was my first true road racing bike purchase, and I was riding it for my first race win. Wonderful frame. I wish I still had mine.
__________________
Platypus gravelus.
Platypus gravelus.
#12
Thanks!
This is where my novice experience shows. Are putting more recent 10 speed group sets (e.g. Tiagra 4700) risky for this frame? I'd love to find the original group set, but as you indicated that may be challenging. Is there anything in particular I should pay attention to when looking at newer components? The majority of the responses on this thread have been unanimous on ensuring that all the components fit with another, but are there any considerations for newer grouppos on this frame?
This is where my novice experience shows. Are putting more recent 10 speed group sets (e.g. Tiagra 4700) risky for this frame? I'd love to find the original group set, but as you indicated that may be challenging. Is there anything in particular I should pay attention to when looking at newer components? The majority of the responses on this thread have been unanimous on ensuring that all the components fit with another, but are there any considerations for newer grouppos on this frame?
#13
Senior Member
The only risk is that you mentioned Tiagra 10 speed. There's nothing particularly wrong with Tiagra 10 speed, but it has a complication. Just about any other Shimano group (you want to keep all of your drivetrain parts - shifters, derailleurs, cassette, mainly, crankset and brakes don't matter as much - from the same manufacturer), you can mix and match parts as long as they're for the same speed (can be any mix of Dura Ace, Ultegra, 105, whatever as long as they're all 10 speed or 11 or 9 speed - 8 speed Dura Ace or below is a different ball of wax), but Tiagra 10 speed isn't that way. It doesn't play nicely with any other 10 speed parts, so you have to get all Tiagra if you decide to go Tiagra 10 speed. Not that there's anything wrong with that, but, if you're sourcing used, it's a lot easier if you can be a bit more flexible.
#14
Newbie
Thread Starter
Join Date: Aug 2022
Location: Ohio
Posts: 13
Bikes: 2017 Surly Cross Check, 1998 Lemond Zurich (frame only)
Likes: 0
Liked 0 Times
in
0 Posts
The only risk is that you mentioned Tiagra 10 speed. There's nothing particularly wrong with Tiagra 10 speed, but it has a complication. Just about any other Shimano group (you want to keep all of your drivetrain parts - shifters, derailleurs, cassette, mainly, crankset and brakes don't matter as much - from the same manufacturer), you can mix and match parts as long as they're for the same speed (can be any mix of Dura Ace, Ultegra, 105, whatever as long as they're all 10 speed or 11 or 9 speed - 8 speed Dura Ace or below is a different ball of wax), but Tiagra 10 speed isn't that way. It doesn't play nicely with any other 10 speed parts, so you have to get all Tiagra if you decide to go Tiagra 10 speed. Not that there's anything wrong with that, but, if you're sourcing used, it's a lot easier if you can be a bit more flexible.
#15
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,192
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Liked 1,550 Times
in
858 Posts
Scottmph , PM'ed you regarding a 6500 group set, but I think you may not be able to PM yet. Post here if you have interest but cannot PM yet.
#16
Newbie
Thread Starter
Join Date: Aug 2022
Location: Ohio
Posts: 13
Bikes: 2017 Surly Cross Check, 1998 Lemond Zurich (frame only)
Likes: 0
Liked 0 Times
in
0 Posts
Scottmph , PM'ed you regarding a 6500 group set, but I think you may not be able to PM yet. Post here if you have interest but cannot PM yet.
#17
Newbie
Thread Starter
Join Date: Aug 2022
Location: Ohio
Posts: 13
Bikes: 2017 Surly Cross Check, 1998 Lemond Zurich (frame only)
Likes: 0
Liked 0 Times
in
0 Posts
Congratulations, I own a '98 Zurich with the classic red with white panels on the terrific Reynolds 853 frame and it came with 25mm but I now ride 28mm. You have a 130mm dropout spacing so as said any 8 to 11 speed groupset/wheels will nicely fit. I found the stock 2x9 Shimano Ultegra 6500 groupset flawless but parts always get harder to find with older groupsets.
#18
Newbie
Thread Starter
Join Date: Aug 2022
Location: Ohio
Posts: 13
Bikes: 2017 Surly Cross Check, 1998 Lemond Zurich (frame only)
Likes: 0
Liked 0 Times
in
0 Posts
I ride a '06 LeMond Reno. The Zurich is spec'd with 25's, as is my Reno. I have Michelin Pro 4 tires- 25's-on it which leaves 3/8" clearance to the seat tube. Now, those tires actually measured out to 28, so if your geometry is similar, could use 28's-if the tires you use are true to size. BTW-that is a very nice frame! Have fun building iit up.
#20
Newbie
Thread Starter
Join Date: Aug 2022
Location: Ohio
Posts: 13
Bikes: 2017 Surly Cross Check, 1998 Lemond Zurich (frame only)
Likes: 0
Liked 0 Times
in
0 Posts
depending on how much you want new ones, you may want to find someone who can design new ones for you. I have an older Surly and someone at my bike shop designed new decals for the bike. Might have just been lucky to have someone local to do that, but may be a better option than combing through eBay.
#22
Newbie
Thread Starter
Join Date: Aug 2022
Location: Ohio
Posts: 13
Bikes: 2017 Surly Cross Check, 1998 Lemond Zurich (frame only)
Likes: 0
Liked 0 Times
in
0 Posts
#23
Senior Member
I had a '98 Zurich and I loved it. The bad thing about the Lemond's and Trek's of that era is the paint is paper thin and peels off if you sneeze on it. Almost impossible to find one of those bikes today that looks good, they all need repainting.
#24
Good luck and post pics! There's a "Show your LeMond" thread over in the Road Cycling forum that has lots of great bikes posted, but can always use more.
I'm currently working on a '99 Tourmalet build. I have pretty much all the parts, just need the time to put it together. I scored a near-complete, like new Campy Record 9-speed groupset off craigslist for a good price. That can be a good way to get parts if you live somewhere with a lot of road bikers, though you need to be savvy enough to assess the condition of parts yourself or you could get taken advantage of. I think now is a great time to buy higher end 9- and 10-speed stuff, since it's neither the "new hotness" nor is it old enough to be "real vintage," so I've definitely seen some Ultegra, Chorus, and even Dura-Ace go for nice prices. If you want Record of that era, I still think the price is as good as it's ever going to be, but... you definitely pay a price for being a snob. I should know, since I just paid it.
I'm currently working on a '99 Tourmalet build. I have pretty much all the parts, just need the time to put it together. I scored a near-complete, like new Campy Record 9-speed groupset off craigslist for a good price. That can be a good way to get parts if you live somewhere with a lot of road bikers, though you need to be savvy enough to assess the condition of parts yourself or you could get taken advantage of. I think now is a great time to buy higher end 9- and 10-speed stuff, since it's neither the "new hotness" nor is it old enough to be "real vintage," so I've definitely seen some Ultegra, Chorus, and even Dura-Ace go for nice prices. If you want Record of that era, I still think the price is as good as it's ever going to be, but... you definitely pay a price for being a snob. I should know, since I just paid it.
#25
Senior Member
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,859
Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv
Likes: 0
Liked 816 Times
in
474 Posts
Trek is certainly capable of sourcing and applying good paint. They did cure this issue..just not sure when it started and when they fixed it.