mavic wintech
01-01-06 | 04:40 PM
#2
DEADBEEF
Joined: Aug 2002
Posts: 12,234
Likes: 10
From: Catching his breath alongside a road near Seattle, WA USA
Bikes: 1999 K2 OzM, 2001 Aegis Aro Svelte
I believe the WinTech uses a coded signal. Perhaps the computer needs to be resynchronised with the sensor transmitter coding. Check your user manual.
__________________
1999 K2 OzM
2001 Aegis Aro Svelte
"Be liberal in what you accept, and conservative in what you send." -- Jon Postel, RFC1122
1999 K2 OzM
2001 Aegis Aro Svelte"Be liberal in what you accept, and conservative in what you send." -- Jon Postel, RFC1122
01-01-06 | 06:34 PM
#3
Super Modest
Joined: Jun 2002
Posts: 25,343
Likes: 6,637
From: Central Illinois
Bikes: Trek Domane+x2, Trek Emonda
Originally Posted by rover-r-us
i reset my odometer for the new year and now it will not read.the batteries are good and the lever is right.
the clock works fine.
HELP
the clock works fine.
HELP
__________________
“Train hard until your legs are tanned, then keep going until the shape arrives.” -Jolanda Neff
01-01-06 | 07:07 PM
#4
Thread Starter
they call me GRUMPY
Joined: Jan 2006
Posts: 12
Likes: 0
From: va
Bikes: cannondale 6/13
Originally Posted by Trsnrtr
Did you reset it by removing a battery? If so, it will have to be re-synched. Even if you haven't removed a battery, you should probably try that anyway.
yes by removing the battery.i don't see in the book about re-synched.just how to replace the battery.
thanks
01-01-06 | 07:43 PM
#5
Super Modest
Joined: Jun 2002
Posts: 25,343
Likes: 6,637
From: Central Illinois
Bikes: Trek Domane+x2, Trek Emonda
Originally Posted by rover-r-us
yes by removing the battery.i don't see in the book about re-synched.just how to replace the battery.
thanks
thanks
The quick answer is go to the Speed/Cad screen and hold the right button down until the cadence flashes. Then spin the wheel until the speed shows up on the display. Then push the right button again.
Do it again for cadence if necessary except spin the cranks until you get a cadence reading.
-Dennis
__________________
“Train hard until your legs are tanned, then keep going until the shape arrives.” -Jolanda Neff
thats it thanks man!i thought CAD was just for pedaling cadence.now i see it
