Ring-and-Posts
#1
Thread Starter
Newbie
Joined: Sep 2006
Posts: 2
Likes: 0
Ring-and-Posts
This is what the city of Toronto has installed for us to lock our bikes to. It's well known that they can be broken with a wood plank, but the city assures us that it's rare (8 cases) and the ring-and-posts are still the safest way to lock your bike...
well, it happened to me. I had a beater bike (lent to me by girlfriend's dad) locked outside. 4am on my way home, I saw this:


What a waste of a $60 U-Lock. ARgh.
well, it happened to me. I had a beater bike (lent to me by girlfriend's dad) locked outside. 4am on my way home, I saw this:


What a waste of a $60 U-Lock. ARgh.
#3
cab horn

Joined: Jun 2004
Posts: 28,353
Likes: 30
From: Toronto
Bikes: 1987 Bianchi Campione
It's well known that they can be broken with a wood plank, but the city assures us that it's rare (8 cases) and the ring-and-posts are still the safest way to lock your bike...
#5
I think they should've made the top of the pole big enough to prevent lift-off, and made a forged-steel ring sort of like this idea (except thicker where the post goes through it):
Last edited by mechBgon; 10-02-06 at 08:53 PM.
#6
Senior Member
Joined: Aug 2006
Posts: 998
Likes: 0
Kryptonite used to sell to people fairly thick metal posts with a 9-12" solid steel ball welded onto it for use for bike parking. Very simple, very elegant, once installed, but looked like a pain to install because of it being so top heavy. Apparently it didn't sell, as it looks like they are not being offered anymore.
Here is an idea for those Toronto rings... why not have them mounted so they spin/rotate somehow on the posts's axis? A bottom bracket is welded on the pole, the ring is placed on the pole where it can spin freely (like a vertical windmill), and a top bracked dropped on top of that and welded/brazed into place. This will make it harder for a would-be thief to get the required leverage with a 2x4, as the thief would have to push up/down to break the pole off, not sideways.
Here is an idea for those Toronto rings... why not have them mounted so they spin/rotate somehow on the posts's axis? A bottom bracket is welded on the pole, the ring is placed on the pole where it can spin freely (like a vertical windmill), and a top bracked dropped on top of that and welded/brazed into place. This will make it harder for a would-be thief to get the required leverage with a 2x4, as the thief would have to push up/down to break the pole off, not sideways.
Last edited by mlts22; 10-02-06 at 11:43 AM.
#7
Thread Starter
Newbie
Joined: Sep 2006
Posts: 2
Likes: 0
This has been known for a while now, but the city hasn't done anything yet. I just feel like going out and breaking a bunch of empty ring-posts myself just to send a message. 
The lock was probably worth more than the bike, it was a really bad beater bike that I wasn't keeping, and I am more pissed off about losing the lock. On the way home that night, I noticed the thieves did a thorough sweep of the city - Sunday night, empty streets. There was another ring taken off a post, and many victimized bikes. My main bike is actually a folder, so I don't have to worry about this BS anymore.

The lock was probably worth more than the bike, it was a really bad beater bike that I wasn't keeping, and I am more pissed off about losing the lock. On the way home that night, I noticed the thieves did a thorough sweep of the city - Sunday night, empty streets. There was another ring taken off a post, and many victimized bikes. My main bike is actually a folder, so I don't have to worry about this BS anymore.
#8
cab horn

Joined: Jun 2004
Posts: 28,353
Likes: 30
From: Toronto
Bikes: 1987 Bianchi Campione
This has been known for a while now, but the city hasn't done anything yet. I just feel like going out and breaking a bunch of empty ring-posts myself just to send a message.
#10
Originally Posted by operator
And leave the piece of wood there. But then again discolosure vs public safety?
#11
Senior Member
Joined: Aug 2006
Posts: 998
Likes: 0
Open disclosure is fairly moot -- almost any would-be thief knows about the 2x4 trick. Its similar to the round key lock issue, the thieves knew, but the honest people didn't, so the honest kept using them not realizing.
Last edited by mlts22; 10-03-06 at 05:04 PM.




