Tube problems
03-08-07 | 10:01 AM
#1
Thread Starter
Newbie
Joined: Mar 2007
Posts: 2
Likes: 0
Tube problems
(note: I am new to cycling so please forgive my ignorance and help me learn)
I bought a Giant road bike back in December(I can't remember the exact model because I had to ride my cruiser to campus today due to the problem I am about to state) with 650 wheels. I recently had to buy new tubes (about two weeks ago) because the tubes that came with the bike ended up puncturing while I was trying to pump the tires. So I've started to utilize a new technique of putting the spickets at the 12 o'clock position before putting on the pump, pumping to the desired psi, then taking the wheel b/t my legs and using both hands to pull the pump straight off the spicket. Beforehand, I was jiggling the pump on and off the pump, which I suspected was the original culprit. However, this morning, I just punctured the tube again ... and ended up being late to class but that doesn't matter. I am just enraged that I just spent $32 just two weeks ago for new tubes and that I am going to have to spend another $16. What am I doing wrong? Any tips?
Leilani
P.S. Since it seems that I would be changing my tubes quite often, would anyone mind showing me how to change them? I've seen people change them several times but I am quite wary of doing it myself.
I bought a Giant road bike back in December(I can't remember the exact model because I had to ride my cruiser to campus today due to the problem I am about to state) with 650 wheels. I recently had to buy new tubes (about two weeks ago) because the tubes that came with the bike ended up puncturing while I was trying to pump the tires. So I've started to utilize a new technique of putting the spickets at the 12 o'clock position before putting on the pump, pumping to the desired psi, then taking the wheel b/t my legs and using both hands to pull the pump straight off the spicket. Beforehand, I was jiggling the pump on and off the pump, which I suspected was the original culprit. However, this morning, I just punctured the tube again ... and ended up being late to class but that doesn't matter. I am just enraged that I just spent $32 just two weeks ago for new tubes and that I am going to have to spend another $16. What am I doing wrong? Any tips?
Leilani
P.S. Since it seems that I would be changing my tubes quite often, would anyone mind showing me how to change them? I've seen people change them several times but I am quite wary of doing it myself.
03-08-07 | 10:20 AM
#2
Senior Member
Joined: May 2002
Posts: 2,316
Likes: 205
From: Likely North of you.
Bikes: 2020 Trek Domane SL6, 2021 Salsa Cutthroat 600, 2018 Giant Trance 2, 1998 Marinoni Turismo, 2016 Rocky Mountain -20 fat bike, mid-80s Velo Sport single speed, 2020 Fyxation Quiver
Originally Posted by burying lamps
(note: I am new to cycling so please forgive my ignorance and help me learn)
I bought a Giant road bike back in December(I can't remember the exact model because I had to ride my cruiser to campus today due to the problem I am about to state) with 650 wheels. I recently had to buy new tubes (about two weeks ago) because the tubes that came with the bike ended up puncturing while I was trying to pump the tires. So I've started to utilize a new technique of putting the spickets at the 12 o'clock position before putting on the pump, pumping to the desired psi, then taking the wheel b/t my legs and using both hands to pull the pump straight off the spicket. Beforehand, I was jiggling the pump on and off the pump, which I suspected was the original culprit. However, this morning, I just punctured the tube again ... and ended up being late to class but that doesn't matter. I am just enraged that I just spent $32 just two weeks ago for new tubes and that I am going to have to spend another $16. What am I doing wrong? Any tips?
Leilani
P.S. Since it seems that I would be changing my tubes quite often, would anyone mind showing me how to change them? I've seen people change them several times but I am quite wary of doing it myself.
I bought a Giant road bike back in December(I can't remember the exact model because I had to ride my cruiser to campus today due to the problem I am about to state) with 650 wheels. I recently had to buy new tubes (about two weeks ago) because the tubes that came with the bike ended up puncturing while I was trying to pump the tires. So I've started to utilize a new technique of putting the spickets at the 12 o'clock position before putting on the pump, pumping to the desired psi, then taking the wheel b/t my legs and using both hands to pull the pump straight off the spicket. Beforehand, I was jiggling the pump on and off the pump, which I suspected was the original culprit. However, this morning, I just punctured the tube again ... and ended up being late to class but that doesn't matter. I am just enraged that I just spent $32 just two weeks ago for new tubes and that I am going to have to spend another $16. What am I doing wrong? Any tips?
Leilani
P.S. Since it seems that I would be changing my tubes quite often, would anyone mind showing me how to change them? I've seen people change them several times but I am quite wary of doing it myself.
There are many resources on the NET to learn how to change tubes, fix flats, etc. Best choices (in my humble opinion) are:
www.sheldonbrown.com
www.parktool.com - go to 'repair help' top right on the website
As for your tube problem, is the hole near the valve (spicket)? What type of valve is it - does it look like a car valve?
If the hole is near the valve then it seems as if you are a little....rough with mounting and dismounting the pump, thereby tearing the tube. That leads me to the next question - what type of pump is it? Does it have a lever at the pump head that you have to open and close to mount and dismount the pump?
Another possiblity is that when remounting the tire you are pinching the tube.
Another possibility is the absence of a rim strip. A stip of rubber or plastic on the rim that covers the sprocket holes to avoid a puncture in the tube.
I guess it comes down to, where is the hole in the tube? Knowing that will give a better clue as to what is happening.
03-08-07 | 12:15 PM
#3
Feral Member
Joined: Apr 2004
Posts: 2,667
Likes: 0
From: Roma, Italia
Bikes: yes, I have one.
