Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   General Cycling Discussion (https://www.bikeforums.net/general-cycling-discussion/)
-   -   Chain help (https://www.bikeforums.net/general-cycling-discussion/517432-chain-help.html)

gageplate 03-05-09 07:59 PM

Chain help
 
Hi All, Had my bike in at my lbs today to have a few things checked and while there he had mentioned that i need to replace my chain. This is all fine with me but i have only logged at the most 400-500 miles on it. My question to all of you is, is this something i am going to have to do every 500 miles? Is this considered normal wear and tear or am i doing something wrong while i am biking. He had mentioned that possibly i was cross chaining. If that is so would the chain wear that quickly and how do i prevent further problems likethis. Any and all help (suggestions) would be great. Thanks in advance for the help. Brad

10 Wheels 03-05-09 08:03 PM

Rode 8,000 miles on my first chain
Cleaned it every 500 miles
Now 5,000 miles on my 2nd chain.

gageplate 03-05-09 08:08 PM

wish i could say the same. Just trying to figure out what i am doing wrong.

Panthers007 03-05-09 10:34 PM

Bought a "previously owned" chain? The bike-shop wants to sell you a chain? Your chain was poorly manufactured with inferior materials? You didn't eat your Lima Beans as a kid? You weigh 800 pounds in your shorts?

Seriously though - get a chain-checker or learn to use a ruler for the same purpose. Find out for certain before you plunk down $20.

Velo Dog 03-06-09 12:00 AM

You don't actually need a "chain checker" to check the chain yourself. Here are a couple of easy ways:
Take an ordinary ruler, 12 inches long, and put the mark by the 1 in the center of a pin on the chain. Stretch the chain tight and look at the mark by the 12. It should be near the center of the pin on a link. If the pin is more than 1/8 inch past the mark, the chain is worn out (we say it's "stretched," but it doesn't actually stretch. The parts just wear a little).
Or put the chain on the big ring with the cranks vertical, one at 12 o'clock and one at 6. Pinch the chain at 3 o'clock and pull it away from the ring. If it pulls far enough to expose all or nearly all of one chainring tooth, replace it.
As for your original question, I don't keep track of chain life, but I'm sure I get at least 2500-3000 miles on one, and probably quite a bit more. I've had my singlespeed for 10 years (five as a geared bike, five as an SS) and it's still on the original chain.

gageplate 03-06-09 06:43 AM

Thanks for the help. Velo Dog i meant to say in my earlier post that i did check it with a tape. I measured out at about 1/16" over the 12" mark. Again i am not disputed my lbs i just am trying to figure out if i am doing something wrong while biking.


All times are GMT -6. The time now is 06:43 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.