Exercise Rollers - Good or Bad?
#1
Thread Starter
likes bikes
Joined: Jun 2011
Posts: 92
Likes: 0
From: Northeastern US
Bikes: Bianchi '88 Road Bike, Trek Allant
Exercise Rollers - Good or Bad?
Newbie:
https://www.youtube.com/watch?v=mTfVVPwRJ_k
Experts:
https://www.youtube.com/watch?v=sVbwngNoHm0
I am considering a roller for winter exercise. It looks like it's a helluva lot more challenging, as well as more fun and engaging, than stationary bikes.
:
But they also look very tricky, especially for a rickety 50 year old like me. I am looking for educated opinions on this. Should I go the stationary route or do I dare try this at home?
https://www.youtube.com/watch?v=mTfVVPwRJ_k
Experts:
https://www.youtube.com/watch?v=sVbwngNoHm0
I am considering a roller for winter exercise. It looks like it's a helluva lot more challenging, as well as more fun and engaging, than stationary bikes.
:

But they also look very tricky, especially for a rickety 50 year old like me. I am looking for educated opinions on this. Should I go the stationary route or do I dare try this at home?
#2
Banned
Joined: Jun 2010
Posts: 43,586
Likes: 1,380
From: NW,Oregon Coast
Bikes: 8
put some platforms on the side to put your foot down on,
and maybe set up in a doorway till you get the drift of it.
smaller rollers are a higher effort level..
there are some with rollers with a bit of a flare on the ends to keep
you on them .
and a fork support to replace the front wheel .. wouldn't use a CF fork in those..
half way between trainer stand and roller then,
and maybe set up in a doorway till you get the drift of it.
smaller rollers are a higher effort level..
there are some with rollers with a bit of a flare on the ends to keep
you on them .
and a fork support to replace the front wheel .. wouldn't use a CF fork in those..
half way between trainer stand and roller then,
Last edited by fietsbob; 07-13-11 at 01:38 PM.
#3
Fax Transport Specialist


Joined: May 2008
Posts: 1,001
Likes: 727
From: chicago burbs
Bikes: '17 giant propel, '07 fuji cross pro, '10 gary fisher x-caliber
+1 to putting them in a doorframe and using some kind of platform. 2x10" lumber is cheap and makes for a nice base, stack it at least twice though.
#4
rebmeM roineS

Joined: Jan 2006
Posts: 16,230
Likes: 363
From: Metro Indy, IN
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
I had a set of RollTrac (sp?) rollers 30+ years ago. They were made with a structure that acted as built-in platforms. I used them in a doorway and had no misadventures while riding them.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
#5
Thread Starter
likes bikes
Joined: Jun 2011
Posts: 92
Likes: 0
From: Northeastern US
Bikes: Bianchi '88 Road Bike, Trek Allant
Doorway idea makes sense. And so does make a simple platform.
Will have to see. I guess my main concern is whether or not it is better than a dedicated spinner. The less expensive rollers seem to offer no resistance - which may not be a bad thing overall, but not really sure.
Will have to see. I guess my main concern is whether or not it is better than a dedicated spinner. The less expensive rollers seem to offer no resistance - which may not be a bad thing overall, but not really sure.
#6
Fax Transport Specialist


Joined: May 2008
Posts: 1,001
Likes: 727
From: chicago burbs
Bikes: '17 giant propel, '07 fuji cross pro, '10 gary fisher x-caliber
I've heard you can put a towel underneath one or more of the roller drums to create a source of friction. I have the performance bike rollers and they have grooves for the rubber band on both sides of the drums. You could install a second band that would couple a homebuilt resistance unit. Or you can deflate your tires a bit.
The doorway is most effective when you can stick out your elbow to push yourself back in line, instead of taking your hands off the bars.
The doorway is most effective when you can stick out your elbow to push yourself back in line, instead of taking your hands off the bars.
#7
Senior Member

Joined: Sep 2009
Posts: 2,688
Likes: 428
From: Sioux Falls, SD
Bikes: '81 Panasonic Sport, '02 Giant Boulder SE, '08 Felt S32, '10 Diamondback Insight RS, '10 Windsor Clockwork, '15 Kestrel Evoke 3.0, '19 Salsa Mukluk
I bought a set of rollers a couple of years ago with the same intention of training during the winter months. I used mine a few times, then decided I could no longer take the boredom of riding inside.
That was the first year I rode outside all winter. Turned out to be loads of fun and a heck of a workout. The most intense workout I've ever had was a 7 mile ride that took nearly 2 hours because I was trudging through 5" of unplowed snow. I was in my lowest gear, standing on the pedals and barely breaking 4 mph. I had to keep stopping to let my heart rate come down from the stratosphere. After riding outside that whole winter, come spring I was the strongest I've ever been on the bike.
Just saw my rollers this morning sitting in the corner with 2 years worth of dust on them. I should probably throw them on Craigslist as hopefully I'll never use them again.
That was the first year I rode outside all winter. Turned out to be loads of fun and a heck of a workout. The most intense workout I've ever had was a 7 mile ride that took nearly 2 hours because I was trudging through 5" of unplowed snow. I was in my lowest gear, standing on the pedals and barely breaking 4 mph. I had to keep stopping to let my heart rate come down from the stratosphere. After riding outside that whole winter, come spring I was the strongest I've ever been on the bike.
Just saw my rollers this morning sitting in the corner with 2 years worth of dust on them. I should probably throw them on Craigslist as hopefully I'll never use them again.
#9
Thread Starter
likes bikes
Joined: Jun 2011
Posts: 92
Likes: 0
From: Northeastern US
Bikes: Bianchi '88 Road Bike, Trek Allant
I bought a set of rollers a couple of years ago with the same intention of training during the winter months. I used mine a few times, then decided I could no longer take the boredom of riding inside.
That was the first year I rode outside all winter. Turned out to be loads of fun and a heck of a workout. The most intense workout I've ever had was a 7 mile ride that took nearly 2 hours because I was trudging through 5" of unplowed snow. I was in my lowest gear, standing on the pedals and barely breaking 4 mph. I had to keep stopping to let my heart rate come down from the stratosphere. After riding outside that whole winter, come spring I was the strongest I've ever been on the bike.
Just saw my rollers this morning sitting in the corner with 2 years worth of dust on them. I should probably throw them on Craigslist as hopefully I'll never use them again.
That was the first year I rode outside all winter. Turned out to be loads of fun and a heck of a workout. The most intense workout I've ever had was a 7 mile ride that took nearly 2 hours because I was trudging through 5" of unplowed snow. I was in my lowest gear, standing on the pedals and barely breaking 4 mph. I had to keep stopping to let my heart rate come down from the stratosphere. After riding outside that whole winter, come spring I was the strongest I've ever been on the bike.
Just saw my rollers this morning sitting in the corner with 2 years worth of dust on them. I should probably throw them on Craigslist as hopefully I'll never use them again.
I used to use a treadmill (which I really liked using until I busted my ankle) and the boredom was mitigated by watching TV during exercise and I am thinking of doing the same on the rollers (if I get them that is).
#10
Fail Boat crewman
Joined: Feb 2011
Posts: 675
Likes: 0
From: PDX
Bikes: Reynolds 853 Jamis Quest 1990s
You could build a frame from black pipe and bring it up to the front and rear wheel and use it as a bumper for your triangle/fork. I would wrap it in pipe foam before I got mounted though.
#11
Senior Member

Joined: Sep 2009
Posts: 2,688
Likes: 428
From: Sioux Falls, SD
Bikes: '81 Panasonic Sport, '02 Giant Boulder SE, '08 Felt S32, '10 Diamondback Insight RS, '10 Windsor Clockwork, '15 Kestrel Evoke 3.0, '19 Salsa Mukluk
Funny. I live in VT and cannot ride during winter outdoors. Not only is it usually hovering around zero for a good part of the time, but the roads are all snow, ice or salt (and extra narrow due to snow build up).
I used to use a treadmill (which I really liked using until I busted my ankle) and the boredom was mitigated by watching TV during exercise and I am thinking of doing the same on the rollers (if I get them that is).
I used to use a treadmill (which I really liked using until I busted my ankle) and the boredom was mitigated by watching TV during exercise and I am thinking of doing the same on the rollers (if I get them that is).
I did dedicate one of my old bikes to "winter only" because of the toll the salt takes on it. I bought studded tires and just leave it set up that way. With studs, ice is not a factor as long as I don't get really crazy. Cruising across areas of sheet ice I enjoy locking up my rear wheel and watching the grooves my studs dig in the ice.
I don't watch much TV. I ran on the treadmill some this winter due a few weeks where we had heavy ice (I don't have studded running shoes, lol). I would watch TV but still felt it mind numbing. As soon as I could I got back outdoors. I guess I just prefer being outside.
#12
Thread Starter
likes bikes
Joined: Jun 2011
Posts: 92
Likes: 0
From: Northeastern US
Bikes: Bianchi '88 Road Bike, Trek Allant
I live in South Dakota. Below zero a good chunk of the winter with 30+ mph winds and plenty of snow. I'll put our winters up against anyone's. It's really not as difficult as it sounds. Deciding to ride outside is actually tougher than riding outside. Plenty of days where I wake up at 5 AM and everything inside me is telling me to stay inside where it's warm and go back to bed. Once I'm a couple of miles down the road and have a good sweat going I always think, "meh, this really isn't too bad."
I did dedicate one of my old bikes to "winter only" because of the toll the salt takes on it. I bought studded tires and just leave it set up that way. With studs, ice is not a factor as long as I don't get really crazy. Cruising across areas of sheet ice I enjoy locking up my rear wheel and watching the grooves my studs dig in the ice.
I don't watch much TV. I ran on the treadmill some this winter due a few weeks where we had heavy ice (I don't have studded running shoes, lol). I would watch TV but still felt it mind numbing. As soon as I could I got back outdoors. I guess I just prefer being outside.
I did dedicate one of my old bikes to "winter only" because of the toll the salt takes on it. I bought studded tires and just leave it set up that way. With studs, ice is not a factor as long as I don't get really crazy. Cruising across areas of sheet ice I enjoy locking up my rear wheel and watching the grooves my studs dig in the ice.
I don't watch much TV. I ran on the treadmill some this winter due a few weeks where we had heavy ice (I don't have studded running shoes, lol). I would watch TV but still felt it mind numbing. As soon as I could I got back outdoors. I guess I just prefer being outside.

But I can believe S.D. is easily just as bad as VT if not worse, so much props to ya!
#13
Membership Not Required
Joined: Jan 2005
Posts: 16,853
Likes: 18
From: On the road-USA
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG
Aww crap...I gotta ride outside in the winter?
in NC? 
I used rollers years ago to work on my spinning technique for racing as well as for staying in shape. We also used to have roller races at the local mall and some bars. We didn't do the sissy stuff with the fork mounts, we rode free and wild.
Doorways are good thing for rollers.
Aaron
in NC? 
I used rollers years ago to work on my spinning technique for racing as well as for staying in shape. We also used to have roller races at the local mall and some bars. We didn't do the sissy stuff with the fork mounts, we rode free and wild.
Doorways are good thing for rollers.
Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#14
Senior Member
Joined: May 2008
Posts: 320
Likes: 0
From: Rockland County, NY
Bikes: Giant TCRC2 2007, Dahon MU P8 2012, GT Avalance 2011
I use rollers during the winter. I can leave my bike set up and if there's a nice day it's easy to ride outside. I'm not strong enough to spin out in the larger gears so I still get a good workout and it helps my technique. Mine are set up between the wall and the end of a fooseball table a door would be better but I don't have to do much to get ready and go riding. I watch Spinervals and other videos for entertainment.
50 is the new start of middle age!
50 is the new start of middle age!
#15
Thread Starter
likes bikes
Joined: Jun 2011
Posts: 92
Likes: 0
From: Northeastern US
Bikes: Bianchi '88 Road Bike, Trek Allant
I use rollers during the winter. I can leave my bike set up and if there's a nice day it's easy to ride outside. I'm not strong enough to spin out in the larger gears so I still get a good workout and it helps my technique. Mine are set up between the wall and the end of a fooseball table a door would be better but I don't have to do much to get ready and go riding. I watch Spinervals and other videos for entertainment.
50 is the new start of middle age!
50 is the new start of middle age!
#16
Used & Abused
Joined: Jun 2011
Posts: 314
Likes: 0
Bikes: GT Avalanche 2.0 + Burley D'lite
I used one of these for a few years. Not exactly the same, but they will still give you the workout. There is a cheap plastic triangle thing that goes in the front for the front tire.
https://www.performancebike.com/bikes...8_20000_400133
https://www.performancebike.com/bikes...8_20000_400133
#17
Thread Starter
likes bikes
Joined: Jun 2011
Posts: 92
Likes: 0
From: Northeastern US
Bikes: Bianchi '88 Road Bike, Trek Allant
Thanks Jimi - I am also considering one of those as well - but the rollers look much more challenging and so I expect I might stay with it more. Who doesn't love a challenge?
#18
Membership Not Required
Joined: Jan 2005
Posts: 16,853
Likes: 18
From: On the road-USA
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG

We have one of the rear wheel resistance trainers that my wife uses in the colder months (cold being a relative term) I ride year round. I have thought about getting a set of rollers again just for the helluva it. Might come in handy for checking out a bike I have repaired without having to leave my warm shop

Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#20
Thread Starter
likes bikes
Joined: Jun 2011
Posts: 92
Likes: 0
From: Northeastern US
Bikes: Bianchi '88 Road Bike, Trek Allant
They are, they teach you to ride smoother or you end up on the floor 
We have one of the rear wheel resistance trainers that my wife uses in the colder months (cold being a relative term) I ride year round. I have thought about getting a set of rollers again just for the helluva it. Might come in handy for checking out a bike I have repaired without having to leave my warm shop
Aaron

We have one of the rear wheel resistance trainers that my wife uses in the colder months (cold being a relative term) I ride year round. I have thought about getting a set of rollers again just for the helluva it. Might come in handy for checking out a bike I have repaired without having to leave my warm shop

Aaron

#21
Thread Starter
likes bikes
Joined: Jun 2011
Posts: 92
Likes: 0
From: Northeastern US
Bikes: Bianchi '88 Road Bike, Trek Allant
#22
stays crunchy in milk
Joined: Jul 2005
Posts: 101
Likes: 0
From: victoria, bc
While rollers won't give you the same level of workout that a trainer will, they are far more enjoyable and require your complete concentration (no watching TV unless you have some damn fine skillz). Once you get the hang of it, you will notice you are able to hold a much straighter line and ride with more confidence when you get back out on the road.
If you are still can't decide between rollers and a trainer, remember, Eddy Merckx used rollers. That is enough for me.
If you are still can't decide between rollers and a trainer, remember, Eddy Merckx used rollers. That is enough for me.
#23
Thread Starter
likes bikes
Joined: Jun 2011
Posts: 92
Likes: 0
From: Northeastern US
Bikes: Bianchi '88 Road Bike, Trek Allant
While rollers won't give you the same level of workout that a trainer will, they are far more enjoyable and require your complete concentration (no watching TV unless you have some damn fine skillz). Once you get the hang of it, you will notice you are able to hold a much straighter line and ride with more confidence when you get back out on the road.
If you are still can't decide between rollers and a trainer, remember, Eddy Merckx used rollers. That is enough for me.
If you are still can't decide between rollers and a trainer, remember, Eddy Merckx used rollers. That is enough for me.






