Suspension lock off
 

Hi does anyone know how to change cable on mantinou r7 remote lock off

I've no experience w/your particular model, but on my Rockshox the remote lever is connected to the fork using standard shifter wire and housing. The wire is anchored at the fork end by a tiny little set screw that you have to be careful not to strip. I would surmise that Manitou takes a similar approach.

A couple of manuals for the MILO lockout.

https://drive.google.com/file/d/0B7g...N6eE1Fc28/view

https://drive.google.com/file/d/0B7g...VHZ18wd2s/view

Thanks for reply
Unfortunately it's not the same they are connected in a rose joint

[MENTION=467416]Dave50[/MENTION], have you looked at the PDFs linked to by cobba? Those appear to show how the remote is wired.

Thanks for reply it's rose jointed how do I post a picture so that people can see (only use iPad/iPhone)

Upload it to a image hosting site like Imjur and post a link to it.
http://imgur.com/

Doesn't sound like it could be replaced with something like a brake or derailleur cable.
Manitou/Hayes are known to have good customer service.
Send a email to: techsupport@hayesbicycle.com
or use the online contact form: https://www.hayescomponents.com/contact-us/

Hydraulic, maybe? Hydraulic-activated lockouts were briefly a thing.