**Pics** of my new Marin, and a disc conversion question...
#1
Senior Member
Thread Starter
Join Date: Jun 2005
Posts: 51
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well my search for a bike has ended. I do mostly recreational riding on fire roads. My goal was to get a decent starter mountain bike with the best components I could find in my low price range. I came across a good deal on sierratradingpost.com and picked up this bike for $290 delivered, plus 3% cash back from fatwallet.com. I test rode a similar marin at REI and liked the feel.
It was delivered last night, partially assembled: I felt like a 12 year old kid again opening the box!
Here's what it looked like unpacked:
Handlebars assembled
Finished assembly! Don't worry, I already took off the reflectors
Deore rear derailer
Stock V brakes
TruVativ Crank
Front view
OK here's the deal. I've had a set of Avid BB7's laying around begging to be installed. Since this frame, fork and hubs are all disc ready, I figure what the heck, even though its complete overkill for the kind of riding I do. Anyway, my question has to do with cables. The original cables appear to be too short to reach the caliper locations. I could easily replace the cables with aftermarket, BUT I noticed this on the frame:
Cable holders on the frame.
My question is, how do I get aftermarket cables installed the same way?
Also, I gave the bike a quick test run last night, and it shifts ok. I'm wondering if I should take it to a LBS and have it adjusted.
Its going to be a fun weekend!
It was delivered last night, partially assembled: I felt like a 12 year old kid again opening the box!
Here's what it looked like unpacked:
Handlebars assembled
Finished assembly! Don't worry, I already took off the reflectors
Deore rear derailer
Stock V brakes
TruVativ Crank
Front view
OK here's the deal. I've had a set of Avid BB7's laying around begging to be installed. Since this frame, fork and hubs are all disc ready, I figure what the heck, even though its complete overkill for the kind of riding I do. Anyway, my question has to do with cables. The original cables appear to be too short to reach the caliper locations. I could easily replace the cables with aftermarket, BUT I noticed this on the frame:
Cable holders on the frame.
My question is, how do I get aftermarket cables installed the same way?
Also, I gave the bike a quick test run last night, and it shifts ok. I'm wondering if I should take it to a LBS and have it adjusted.
Its going to be a fun weekend!
#2
Senior Member
Join Date: Aug 2003
Location: Oztraylya
Posts: 2,677
Bikes: '03 Fuji Roubaix Pro; '03 KleinGi Attitude; '06 Soma Rush; '04 Surly Cross-Check; '06 Soma Rush; '07 Scott CR1 / Chorus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Is that a Hawk Hill? Looks like a nice ride, good price.
You might want to flip the stem and put the spacers underneath it.
Is that saddle height set up for you? If so, unless you're planning on growing a lot that frame looks pretty darn big for you.
You might want to flip the stem and put the spacers underneath it.
Is that saddle height set up for you? If so, unless you're planning on growing a lot that frame looks pretty darn big for you.
__________________
#3
Senior Member
Join Date: Mar 2000
Location: Parrish, FL
Posts: 7,963
Bikes: Lots
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yeah, the cables will need to be replaced with some longer ones.
If you're not comfortable with the installation, go to www.parktools.com and look through their "how-to" section. Pretty self explanatory.
Get some decent cable cutters. A dremel tool works nicely too.
As far as replacement cables, any bike shop should stock them. You only really need one new cable for the rear as you can use your existing rear cable for the front. Then you'll need some new cable housing. From the cable stop to the rear disc should be about 3 or 4 feet. Then, I'd run a whole new front from the lever to the caliper should also be about 4 feet.
If you're not comfortable with the installation, go to www.parktools.com and look through their "how-to" section. Pretty self explanatory.
Get some decent cable cutters. A dremel tool works nicely too.
As far as replacement cables, any bike shop should stock them. You only really need one new cable for the rear as you can use your existing rear cable for the front. Then you'll need some new cable housing. From the cable stop to the rear disc should be about 3 or 4 feet. Then, I'd run a whole new front from the lever to the caliper should also be about 4 feet.
__________________
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
#4
Senior Member
Thread Starter
Join Date: Jun 2005
Posts: 51
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yes its a Hawk Hill and no the bike seat wasn't setup for me in the photo. I'm 5'11 and the bike frame is 18" which felt right for me.
Can you check that URL? It doesn't seem to open.
Can you check that URL? It doesn't seem to open.
#5
Senior Member
Join Date: Aug 2003
Location: Oztraylya
Posts: 2,677
Bikes: '03 Fuji Roubaix Pro; '03 KleinGi Attitude; '06 Soma Rush; '04 Surly Cross-Check; '06 Soma Rush; '07 Scott CR1 / Chorus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
__________________
#6
Senior Member
Originally Posted by a2psyklnut
Yeah, the cables will need to be replaced with some longer ones.
If you're not comfortable with the installation, go to www.parktools.com and look through their "how-to" section. Pretty self explanatory.
Get some decent cable cutters. A dremel tool works nicely too.
As far as replacement cables, any bike shop should stock them. You only really need one new cable for the rear as you can use your existing rear cable for the front. Then you'll need some new cable housing. From the cable stop to the rear disc should be about 3 or 4 feet. Then, I'd run a whole new front from the lever to the caliper should also be about 4 feet.
If you're not comfortable with the installation, go to www.parktools.com and look through their "how-to" section. Pretty self explanatory.
Get some decent cable cutters. A dremel tool works nicely too.
As far as replacement cables, any bike shop should stock them. You only really need one new cable for the rear as you can use your existing rear cable for the front. Then you'll need some new cable housing. From the cable stop to the rear disc should be about 3 or 4 feet. Then, I'd run a whole new front from the lever to the caliper should also be about 4 feet.
#7
Senior Member
Join Date: May 2004
Location: !NorCal!
Posts: 146
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
[QUOTE=a2psyklnut] A dremel tool works nicely too.QUOTE]
Hey 'nut, what Dremel attachment do you use for cable and/or housing? Is it just yer basic cut-off wheel?
My cheap cable cutting tool is on it's way out, but I've got cutting wheels aplenty...
TIA
EDIT: and actually, that is a KILLER deal for that Marin bike. You should be proud, pimpin' the internet commerce like that.
Hey 'nut, what Dremel attachment do you use for cable and/or housing? Is it just yer basic cut-off wheel?
My cheap cable cutting tool is on it's way out, but I've got cutting wheels aplenty...
TIA
EDIT: and actually, that is a KILLER deal for that Marin bike. You should be proud, pimpin' the internet commerce like that.
#8
Junior Member
Join Date: May 2005
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I also got the Hawk Hill from Sierra Trading Post. What is Fat Wallet? I didn't get 3% back Oh well, I got an awesome bike for $290. I got the blue color. It still needs to be assembled. It's been sitting at a friend of mine's body shop for about 3 weeks now. I'm working on another bike and told him if he put together the Hawk Hill, I'd "forget" about the other bike and it would never get stripped, sanded, painted, or reassembled. B/c I'd be riding around on the new one. That other bike is now just waiting to be reassembled(finally done stripping, sanding, and painting) and then the Hawk Hill, which should only take about 20 minutes since it came partially assembled.
How do you like the bike? I didn't get a chance to test ride one, but for the price, I figured if I didn't like it I could sell it and at least get what I paid for it back, if not more.
Hope you enjoy it. It looks great!
How do you like the bike? I didn't get a chance to test ride one, but for the price, I figured if I didn't like it I could sell it and at least get what I paid for it back, if not more.
Hope you enjoy it. It looks great!
#9
Senior Member
Join Date: Mar 2000
Location: Parrish, FL
Posts: 7,963
Bikes: Lots
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
[QUOTE=geoduck]
Just the cut-off wheel. Go to Home Depot and get a new one!
Or, when you use your cable cutters, put the ends on a grinder wheel to make them perfectly smooth.
Originally Posted by a2psyklnut
A dremel tool works nicely too.QUOTE]
Hey 'nut, what Dremel attachment do you use for cable and/or housing? Is it just yer basic cut-off wheel?
My cheap cable cutting tool is on it's way out, but I've got cutting wheels aplenty...
TIA
EDIT: and actually, that is a KILLER deal for that Marin bike. You should be proud, pimpin' the internet commerce like that.
Hey 'nut, what Dremel attachment do you use for cable and/or housing? Is it just yer basic cut-off wheel?
My cheap cable cutting tool is on it's way out, but I've got cutting wheels aplenty...
TIA
EDIT: and actually, that is a KILLER deal for that Marin bike. You should be proud, pimpin' the internet commerce like that.
Or, when you use your cable cutters, put the ends on a grinder wheel to make them perfectly smooth.
__________________
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, "WOW, What a Ride!" - unknown
"Your Bike Sucks" - Sky Yaeger
#10
Senior Member
Thread Starter
Join Date: Jun 2005
Posts: 51
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by beccagrrl
I also got the Hawk Hill from Sierra Trading Post. What is Fat Wallet? I didn't get 3% back Oh well, I got an awesome bike for $290. I got the blue color. It still needs to be assembled. It's been sitting at a friend of mine's body shop for about 3 weeks now. I'm working on another bike and told him if he put together the Hawk Hill, I'd "forget" about the other bike and it would never get stripped, sanded, painted, or reassembled. B/c I'd be riding around on the new one. That other bike is now just waiting to be reassembled(finally done stripping, sanding, and painting) and then the Hawk Hill, which should only take about 20 minutes since it came partially assembled.
How do you like the bike? I didn't get a chance to test ride one, but for the price, I figured if I didn't like it I could sell it and at least get what I paid for it back, if not more.
Hope you enjoy it. It looks great!
How do you like the bike? I didn't get a chance to test ride one, but for the price, I figured if I didn't like it I could sell it and at least get what I paid for it back, if not more.
Hope you enjoy it. It looks great!
#11
Senior Member
Join Date: Apr 2005
Posts: 913
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wrinkle, I too got the Hawk Hill last week and I am very impressed! Killer deal on a very nicely equipped bike, I paid $312., and then I see a day later it was up to $390. or so. I missed the free shipping on Monday which would have saved me another $14. which is very reasonable from their Wyoming store to California. This bike feels lively and after a seat adjustment, this baby is dialed in. I told my sister to get one for her son's high school graduation, but they only had the 18.5" size and it is too large. Your right about the deal...best one I have seen on a bike. Anyone in the market for a mtb, should give it a look.