Looking For A Bike
#26
Still kicking.


Joined: Oct 2002
Posts: 19,659
Likes: 47
From: Annandale, New Jersey
Bikes: Bike Count: Rising.
Originally Posted by Jason222
That first bike must have a lot of problems. The rear suspension works on frame flex, there's no pivot. And the cannondale shouldn't count because there is a pivot on it.
Umm, being that I work at a Cannondale dealer and have already assembled about 20 scalpels, I can give a very definate no to that statement. The scalpel has carbon flex stays, no pivot on it at all. The thing with soft tails, is that it is an old design, but there is still a cult following for them, which keeps them in production. And to popular belief, there are very little problems with versatility either.
__________________
Appreciate the old bikes more than the new.
Appreciate the old bikes more than the new.
#28
Banned.
Joined: Nov 2004
Posts: 2,123
Likes: 0
From: Moncton NB
Bikes: Trek Jack...trials bike soon.
My bad, I looked at the cannondale Geometry and it looked like there was a pivot at the chainstay.
https://www.cannondale.com/bikes/06/geo-4.html
https://www.cannondale.com/bikes/06/geo-4.html
#29
Desert Rider

Joined: Jun 2004
Posts: 46
Likes: 0
From: El Paso, Texas
Bikes: Trek 4300/Trek Fuel EX6
Check out this link for some trails in the Pa area...
https://trails.mtbr.com/cat/united-st...S_4573CRX.ASPX
https://trails.mtbr.com/cat/united-st...S_4573CRX.ASPX
#31
Still kicking.


Joined: Oct 2002
Posts: 19,659
Likes: 47
From: Annandale, New Jersey
Bikes: Bike Count: Rising.
Originally Posted by hollenjf
I'm going to repost this thread, i think we got quite off topic. Please dont come to these forms if you intend to argue or troll.
Edz: Thanks for the trails!
Edz: Thanks for the trails!

People, really let's get this back on topic, let's help this guy out now.
Konarider24
Forum moderator.
__________________
Appreciate the old bikes more than the new.
Appreciate the old bikes more than the new.
#32
Originally Posted by hollenjf
Heya.. I'm fron northeast PA so there arnt many bike shops around here so I'm quite limited with information, anyhow i was wonderin if someone can reccomend a mountain bike thats fits what I'm looking for.
*16" or 15.5" frame, softtail.
*Front suspension with very small travel. I hate riding a bike with huge front shocks and the handle bars way up in the air.. I like my handlebars low and front end/neck close to the wheel for better stability.
*Looking for something that is solid that I can jump, manuver easily, take very rough terraine, go fast, beat up, but has good enough gears to tear uphill too.
I currently have a NISHIKI AMBUSH that is perrfect for what type of riding I do, but its old and starting to fall apart.
The style of riding I do is a mix of wooded trails, downhills, rocky terraine, uphills, and obsticle paths.
Thanks to anyone that can help.
Josh!
*16" or 15.5" frame, softtail.
*Front suspension with very small travel. I hate riding a bike with huge front shocks and the handle bars way up in the air.. I like my handlebars low and front end/neck close to the wheel for better stability.
*Looking for something that is solid that I can jump, manuver easily, take very rough terraine, go fast, beat up, but has good enough gears to tear uphill too.
I currently have a NISHIKI AMBUSH that is perrfect for what type of riding I do, but its old and starting to fall apart.
The style of riding I do is a mix of wooded trails, downhills, rocky terraine, uphills, and obsticle paths.
Thanks to anyone that can help.
Josh!
you will definitely have to look for a compromise between the various styles of mountain biking.
are you sure you want a softtail specifically or simply full suspension?
these days small travel forks are rarely made for tough, huckable bikes... what is your view of short travel in the front? 90mm? and for downhilling, a long travel fork with handlebars high up in the air would be more stable and comfortable, not to mention a safer riding position.
from your post, you want it to:
-jump, take very rough terrain, beat up
-maneuver easily, go fast, good enough gears to tear uphill.
-short travel full-suspension
those are completely seperate qualities found in opposite ends of the mountain biking continuum, thus you must make a compromise...
reasons why tough, jumpable, rough terrain, beat-upable bikes don't have good enough gears to tear uphill: third chainrings, sometimes even the smallest as well, are taken out and replaced with a bashguard and boxguide/chainguide for ground clearance and the fact that when you take rough jumps, a lot of times you'll land rough and your chain will fall to the bottom bracket area, no matter how good your bike or how plush your suspension is, unless you choose your line and land well every single time. the stance for a bike like this is laid back, saddles usually tilt upwards a bit, long travel forks in the front make it for
xc bikes are made to go fast and are designed to save weight = lighter, so easier to maneuver and go uphill, faster. you usually ride them with a stance close to that of a road bike, without the drop handlebars.
speaking along the lines of specialized, there are two 'compromise' bikes that may or may not suit you:
the enduro line (sx trail and sxtrail2 included) and the stumpjumper fsr, with the latter being more xc-oriented and generally faster, more maneuverable and easier to 'tear uphill', where the former is tougher, can take very rough terrain, and more beat-upable. the stumpjumper fsr would probably cater more to you if you absolutely hate huge-front-travel forks with handlebars so high they make you feel like you're being born again.
both are full-suspension bikes, if that's what you meant by softtail... which according to earlier posts than mine, no.
you know, you can just get both a kona stab supreme and a cannondale scalpel and call it a day...stick it in a half-truck-half-car like a subaru baja and you've got the best of both worlds!
#33
buy Acme anvils
Joined: Sep 2005
Posts: 68
Likes: 0
From: cny
Bikes: 1935 Hawthorne, 1998 Jamis hardtail(s), 2005 bikesdirect sprintour.
https://www.newmilfordbike.com/home.htm
in New Milford of course. never been there. Looks like they sell Cdale.
don't chuck out your old Nishiki, someone might like those 7 speed gripshifts.
in New Milford of course. never been there. Looks like they sell Cdale.
don't chuck out your old Nishiki, someone might like those 7 speed gripshifts.
#34
Senior Member
Joined: Jan 2005
Posts: 199
Likes: 0
From: Fort Collins, Colorado
Bikes: 2004 Giant Iguana 2005 Specialized Enduro SX Trail
Right... anyways to bet back on topic, I would look into a giant trance. It is not a softail, but from the looks of your post it will suit you a bit better for your riding style. It runs 4 inches of travel front and back. The bike does not run a huge fork or anything like that but this is a really tough bike. This thing is used from xc to 4x, so it can be jumped. It has enough suspension in the back to smooth everything out a bit, but the bike pedals really nice to you can go uphill well. It has an air shock so you can run it as stiff or loose as you feel the need to. The low end model starts at 1250, while the highest end tops out at 3600. (I am not quite sure what your budget is) If you have the chance check one of these things out.




