![]() |
Log overs VS. Ramps
Hey, I was just wondering, if you had your choice, would you prefer getting over a log by means of sticks/smaller logs built up to make a log over type thing, or a ramp/jump off of the log?
|
Depends on how much speed I can get based on the trail. I personally would not want to see a ramp, want to jump off of it, and really have to accelerate to do so.
|
I would prefer a ramp.
Was riding the other day and I seem to have a fair bit of difficulty with log overs for some reason.. |
Neither.
|
What? Just clear the log off the trail? Seems like a waste.
|
How about riding over the log w/o a ramp? Are we talking redwood size tree trunk?
|
if you are traveling with a lot of speed before the obstacle, a ramp. i don't want to touch my brakes. ramps are hokey, though, if you're going slow.
|
Originally Posted by ca7erham
(Post 8006033)
What? Just clear the log off the trail? Seems like a waste.
|
depends on the flow of the trail. sometimes a ramp doesn't work well if in a spot where you can't get the right speed. case in point: we have a lot of logs around here that you have to clean in the middle of a climb - a ramp to jump is kinda' useless there.
IMO, if the trail/log gives you enough room to do so, you can do both. or, you can learn to j or bunny hop over some of them. start small and work your way up. this all dovetails nicely with the post a couple days earlier about getting over logs. |
Originally Posted by chelboed
(Post 8006255)
I think what the Pus was saying was that unless it's like 3' in diameter...just go over the thing.:thumb:
|
Originally Posted by scrublover
(Post 8006262)
depends on the flow of the trail. sometimes a ramp doesn't work well if in a spot where you can't get the right speed. case in point: we have a lot of logs around here that you have to clean in the middle of a climb - a ramp to jump is kinda' useless there.
IMO, if the trail/log gives you enough room to do so, you can do both. or, you can learn to j or bunny hop over some of them. start small and work your way up. this all dovetails nicely with the post a couple days earlier about getting over logs. Like that? I tried that once only with a slightly larger log. Worked Ok, but it would have been better with practice. |
Originally Posted by chelboed
(Post 8006255)
I think what the Pus was saying was that unless it's like 3' in diameter...just go over the thing.:thumb:
Also, I'm "old-school" (godz, I hate that term.) Mtn bikes used to have shoulder pads on the frame for extended carrying. I'm perfectly fine with dismounting, climbing over the tree, getting back on, and continuing on my way. I'm riding in the woods to get away from the noise, rush, etc of daily life. I can do a 'cross-style clear of the object in very little time; but longer than jumping it via a ramp, I suppose. Why build something? If something must be built though, go for the stacked logs/branches thing. It's all about using natural stuff gathered from the area. |
Originally Posted by scrublover
(Post 8006262)
depends on the flow of the trail. sometimes a ramp doesn't work well if in a spot where you can't get the right speed. case in point: we have a lot of logs around here that you have to clean in the middle of a climb - a ramp to jump is kinda' useless there.
IMO, if the trail/log gives you enough room to do so, you can do both. or, you can learn to j or bunny hop over some of them. start small and work your way up. this all dovetails nicely with the post a couple days earlier about getting over logs. I know I'm all old and crap, but does anyone else think that as FS bikes have become the standard, that MTB handling skills in general have gone downhill? (no pun intended) Platy :: still kicking it on a 2000 Rocky Mountain hardtail |
I'm still rocking an HT (but I would be riding an FS if I could afford one). For me, I love built up stunts and all, but I totally understand what you are getting at.
|
Originally Posted by ca7erham
(Post 8006459)
I'm still rocking an HT (but I would be riding an FS if I could afford one). For me, I love built up stunts and all, but I totally understand what you are getting at.
Still, for having all of that skill for stuff like jumps (using ramps), seesaws, and such, lots of riders I've seen lack basic skills. For instance: Can you bunny hop a 1.5 foot log using platform pedals? You'd be amazed at the number of people who can't. Avoiding or going "light" over obstacles seems to be a lost art, too. We get what seems like hundreds of wheels brought into the shop for repair that have obviously been slammed into everything the trail had to offer. It makes me sad, really. |
Originally Posted by PlatyPius
(Post 8006506)
For instance:
Can you bunny hop a 1.5 foot log using platform pedals? |
Originally Posted by PlatyPius
(Post 8006425)
I know I'm all old and crap, but does anyone else think that as FS bikes have become the standard, that MTB handling skills in general have gone downhill? (no pun intended)
Overall, current riding styles are different than when rigid or HTs were the norm. |
Originally Posted by PlatyPius
(Post 8006506)
I think "stunts" and such have their place. Town Run trail in Indy, for instance, has both - normal trails AND elevated trails with seesaws, jumps, and such. That's the key - offering both so that people don't get scared off.
Still, for having all of that skill for stuff like jumps (using ramps), seesaws, and such, lots of riders I've seen lack basic skills. For instance: Can you bunny hop a 1.5 foot log using platform pedals? You'd be amazed at the number of people who can't. Avoiding or going "light" over obstacles seems to be a lost art, too. We get what seems like hundreds of wheels brought into the shop for repair that have obviously been slammed into everything the trail had to offer. It makes me sad, really. Can't progress without crashing/ damaging equipment. Got to learn from mistakes. Coming from the northeast, I've come used to rocks and roots and riding on them is second nature. There are sections where the only way through that section is over alot of rough terrain. Those times it's just easier to loosen up on the bike and let the bike go it's own way. Logs as others have said depends on the flow of the trail and the general placement of the downed tree. If it's a downhill type of course where jump could be a benefit, a ramp will likely get built up. If it's a normal trail it's a log crossing with peices of limb making the up and down slope. In the case the log isn't that big, just leave as is. With the case of it would really mess up the flow of the trail, assuming it's a fast, smooth and very flowy section trail where it went down, it may just be beneficial to clear most of the downed tree from the trail and leave a bit of it and build a crossing/ramp over it for those that would like to use it. All I'm using for a mtb is a little 4130 slalom hardtail and I feel faster on it than I did when I had the fisher. |
Originally Posted by PlatyPius
(Post 8006425)
I know I'm all old and crap, but does anyone else think that as FS bikes have become the standard, that MTB handling skills in general have gone downhill? (no pun intended)
|
Originally Posted by PlatyPius
(Post 8006409)
The Freds' Mtn bikes used to have shoulder pads on the frame for extended carrying.
|
Originally Posted by never
(Post 8006774)
No. On my FS bikes, I ride faster and more aggressively than I can on my HT. My handling skills haven't gone downhill, they've changed. It's all about progression. I don't have to pick micro-lines like I used to when riding my old rigid MTB (or even on the HT), now I can focus on macro-lines and go MUCH faster.
Overall, current riding styles are different than when rigid or HTs were the norm. |
^^ :rolleyes: :rolleyes: :rolleyes:
|
While there is some merit to the hardtail thing, it's mostly myth. Only thing the hardtail provides now is forcing you to eye better lines.
|
Oh, and a deadfall is a deadfall; nothing mystic or sacred about it.
http://www.huntsoutboards.com.au/wel...tihl039_lg.jpg |
Originally Posted by dminor
(Post 8007700)
Oh, and a deadfall is a deadfall; nothing mystic or sacred about it.
http://www.huntsoutboards.com.au/wel...tihl039_lg.jpg |
| All times are GMT -6. The time now is 01:07 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.