Recumbent for MS
#1
Thread Starter
Full Member
Joined: Jun 2008
Posts: 358
Likes: 29
From: Canada
Bikes: Devinci Millenium, Gary Fisher Joshua
Recumbent for MS
A friend has a recumbent three wheel bike. He has MS and it is so cool that he has found something that allows him the mobility and exercise all wrapped in one thing. He is very thrilled about it.
Anyways he just got it recently and was telling me that his difficulty is to be able to power during the pull stroke, so I mentioned toe straps. (We live in hilly country) I suggested straps but I realize that even straps have issues because his feet might slip out. Not sure if that is an issue.
Toe clips would work also, but they require a strong sideways twist to get out of (or at least mine do) so that might be an issue for him.
Has anyone got a foot clamping solution?
Anyways he just got it recently and was telling me that his difficulty is to be able to power during the pull stroke, so I mentioned toe straps. (We live in hilly country) I suggested straps but I realize that even straps have issues because his feet might slip out. Not sure if that is an issue.
Toe clips would work also, but they require a strong sideways twist to get out of (or at least mine do) so that might be an issue for him.
Has anyone got a foot clamping solution?
Last edited by alanf; 07-29-16 at 10:33 AM.
#2
Senior Member

Joined: Dec 2004
Posts: 12,551
Likes: 798
From: Middle of da Mitten
Bikes: Trek 7500, RANS V-Rex, Optima Baron, Velokraft NoCom, M-5 Carbon Highracer, Catrike Speed
Technically, the straps are called, "clips." More modern retension systems are called "clipless" because they don't use the strap (which, again, is called a "clip.") Instead, the pedal clamps onto a cleat on the bottom of the shoe. There are many kinds of clipless, some easier to get out of than others. I'd say have him try out Speedplay or SPD systems to see if getting in and out is an issue.
#4
Junior Member
Joined: Jun 2012
Posts: 98
Likes: 0
I use PYRO platforms allows you to use your own choice of shoe plus you can unclip like conventional clipless if needed or hand unclip them then place on your foot separately then clip in. I generally just leave them attached and place my foot in them and do up.
PYRO Platforms
These maybe another option Sunlite Adjustable Heel & Toe Support
https://www.utahtrikes.com/PROD-11618589.html
PYRO Platforms
These maybe another option Sunlite Adjustable Heel & Toe Support
https://www.utahtrikes.com/PROD-11618589.html
Last edited by BohicaX; 08-20-16 at 12:00 AM.
#5
Senior Member


Joined: Feb 2004
Posts: 30,225
Likes: 649
From: St Peters, Missouri
Bikes: Catrike 559 I own some others but they don't get ridden very much.
It's a trike. Clipless is clearly (to me anyway) the "A" answer.
The issue that many people have with clipless pedals is they fear inability to unclip if they have to make a panic stop. That's a non-issue with a trike. You just stop and sit there and it holds itself up.
Mrs. Grouch and I use all SPD-type pedals. Don't skimp on shoes. The stiffer the sole, the better.
The issue that many people have with clipless pedals is they fear inability to unclip if they have to make a panic stop. That's a non-issue with a trike. You just stop and sit there and it holds itself up.
Mrs. Grouch and I use all SPD-type pedals. Don't skimp on shoes. The stiffer the sole, the better.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#6
Senior Member
Joined: Sep 2006
Posts: 378
Likes: 0
From: Boise, ID
Bikes: 2005 Performer Toscana, RANS V3 steel, RANS Citi, Kona Hoo-Ha
Speedplay Frogs are very easy to disengage with a light sideways twist, but they require a somewhat strong forward thrust to engage. However, being on a trike means never falling over at stops, and the consequences of leg suck can be severe. I, too, would recommend some sort of clipless pedal system, not just for the efficiency gains, but also for safety.
#7
Some, maybe all, of the clipless pedals have adjustment screws for tension, so you can adjust them to be easier to unclip from.
With the Shimano pedals, the "mountain" shoes are easier to walk around in, the "road" shoes seem to be stiffer (which is good).
With a trike, another advantage is you can sit there and get both feet clipped in at your leisure before you start moving.
With the Shimano pedals, the "mountain" shoes are easier to walk around in, the "road" shoes seem to be stiffer (which is good).
With a trike, another advantage is you can sit there and get both feet clipped in at your leisure before you start moving.
__________________
"be careful this rando stuff is addictive and dan's the 'pusher'."
"be careful this rando stuff is addictive and dan's the 'pusher'."
Thread
Thread Starter
Forum
Replies
Last Post
mountainwalker
General Cycling Discussion
25
09-03-18 08:39 AM
willydstyle
Classic & Vintage
29
10-23-16 03:47 PM






