Dura Ace Upgrade?
#1
Junior Member
Thread Starter
Join Date: Sep 2004
Posts: 5
Likes: 0
Liked 0 Times
in
0 Posts
Dura Ace Upgrade?
I'm looking for some imput on this one. I have a Scott Addict with front and back Ultegra, my bike shop suggested I add a Dura Ace derailleur to the rear. Will I really see that much improvement in bike performance just by adding a Dura Ace rear derailleur and keeping Ultegra up front, or am I just wasting money?
#2
Senior Member
Join Date: Jul 2009
Location: Orlando, FL
Posts: 2,012
Bikes: Specialized Roubaix SL3, Lynskey Cooper CX
Likes: 0
Liked 0 Times
in
0 Posts
No, you will not notice any improvement with a Dura-Ace rear derailleur over a a new Ultegra one. That is ridiculous. Find a new, honest bike shop.
#4
Throw the stick!!!!
Just wasting money.
__________________
I may be fat but I'm slow enough to make up for it.
#6
Recusant Iconoclast
Do it if it's a steal, ie. the LBS has an extra RD laying around from someone else's upgrade. But like the others have said, you'll hardly notice any improvement, other than a bit of the bling factor.
#7
Bike ≠ Car ≠ Ped.
You can make a DA derailleur shift worse than Tourney if you adjust it badly.
Like mpath said, go ahead and do it if it's real cheap, but otherwise, find a different shop.
I have 7800 shifters and 6600 derailleurs, and although it's nice, it's not worlds better than the all-105 setup I had on an earlier bike (dare I say, it's hard to tell any difference at all).
![Stick Out Tongue](https://www.bikeforums.net/images/smilies/tongue.gif)
I have 7800 shifters and 6600 derailleurs, and although it's nice, it's not worlds better than the all-105 setup I had on an earlier bike (dare I say, it's hard to tell any difference at all).
#8
Senior Member
Rear mech is the one thing that really doesn't change much at each group level. You are only paying for weight decrease and sometimes ceramic bearings that are "better".
#9
Portland Fred
Wasting money. There will be zero improvement in performance. You will save a few grams of weight on the bike and in your wallet.
The only way to noticeably improve your shifting once you have everything properly adjusted is to switch to electronic shifting. That is insanely good.
The only way to noticeably improve your shifting once you have everything properly adjusted is to switch to electronic shifting. That is insanely good.
#11
Senior Member
Join Date: Sep 2008
Location: Tulsa, Oklahoma
Posts: 611
Bikes: raleigh carbon competition, trek 6500 hardtail
Likes: 0
Liked 0 Times
in
0 Posts
My first bike was an aluminum bike with full dura ace, I upgraded to a full carbon bike with 105, I thought to myself, oh man I'm gonna have to spend another 1800 for dura ace to make it as good as my bike. 3 weeks later and 800 miles the only difference is a few grams. They r so close in performance it's not funny
#13
Senior Member
#14
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,863
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Liked 3,111 Times
in
1,418 Posts
FWIW, I had a CX bike that was cobbled together with a mishmash of Shimano groups: DA shifters, Ultegra BB and hubs, 105 RD, and a RSX (!) FD. Worked like a charm.
Save your money: you'll just be saving a few grams, mostly from your wallet.
Save your money: you'll just be saving a few grams, mostly from your wallet.
#15
Senior Member
Join Date: Nov 2008
Location: PHL
Posts: 536
Bikes: De Rosa Planet, Shogun Kaze, Jamis Sputnik, Redline 925
Likes: 0
Liked 0 Times
in
0 Posts
so much bike shop hate. there could be a few reasons that a rear derailleur would help in shifting performance. most notably, the springs will be stronger on the da rd. why is that important? isn't ultegra just fine?
i'll give you an example of a bike that refuses to shift well out of the box with ultegra: a specialized venge. i'm not sure how the cabling is setup with an addict, but the ultegra rd springs are not strong enough to get perfectly smooth shifting. don't take for granted that everything will just work perfectly out of the box with whatever parts bike companies choose to put on them.
specialized is aware of the issue and refers people to buy alternative oem parts from shimano. since every good bike mechanic will notice this problem, all of the springs are currently sold out.
again, while the op didn't say exactly why the rd was recommended, we don't currently know. but don't just think that a bike shop is trying to gauge you. if you actually have a mechanic who knows wtf is going on, they will be a giant help.
i'll give you an example of a bike that refuses to shift well out of the box with ultegra: a specialized venge. i'm not sure how the cabling is setup with an addict, but the ultegra rd springs are not strong enough to get perfectly smooth shifting. don't take for granted that everything will just work perfectly out of the box with whatever parts bike companies choose to put on them.
specialized is aware of the issue and refers people to buy alternative oem parts from shimano. since every good bike mechanic will notice this problem, all of the springs are currently sold out.
again, while the op didn't say exactly why the rd was recommended, we don't currently know. but don't just think that a bike shop is trying to gauge you. if you actually have a mechanic who knows wtf is going on, they will be a giant help.
#16
In the Pain Cave
Join Date: Mar 2008
Location: Nashville, TN
Posts: 1,672
Likes: 0
Liked 0 Times
in
0 Posts
so much bike shop hate. there could be a few reasons that a rear derailleur would help in shifting performance. most notably, the springs will be stronger on the da rd. why is that important? isn't ultegra just fine?
i'll give you an example of a bike that refuses to shift well out of the box with ultegra: a specialized venge. i'm not sure how the cabling is setup with an addict, but the ultegra rd springs are not strong enough to get perfectly smooth shifting. don't take for granted that everything will just work perfectly out of the box with whatever parts bike companies choose to put on them.
specialized is aware of the issue and refers people to buy alternative oem parts from shimano. since every good bike mechanic will notice this problem, all of the springs are currently sold out.
again, while the op didn't say exactly why the rd was recommended, we don't currently know. but don't just think that a bike shop is trying to gauge you. if you actually have a mechanic who knows wtf is going on, they will be a giant help.
i'll give you an example of a bike that refuses to shift well out of the box with ultegra: a specialized venge. i'm not sure how the cabling is setup with an addict, but the ultegra rd springs are not strong enough to get perfectly smooth shifting. don't take for granted that everything will just work perfectly out of the box with whatever parts bike companies choose to put on them.
specialized is aware of the issue and refers people to buy alternative oem parts from shimano. since every good bike mechanic will notice this problem, all of the springs are currently sold out.
again, while the op didn't say exactly why the rd was recommended, we don't currently know. but don't just think that a bike shop is trying to gauge you. if you actually have a mechanic who knows wtf is going on, they will be a giant help.
Incorrect, you will gain some durability and shave some weight anything else is trying to justify money wasted. Just keep the derailed adjusted as the cables loosen overtime.
#18
Junior Member
Join Date: Jul 2012
Posts: 17
Likes: 0
Liked 0 Times
in
0 Posts
I rode Ultegra for about 5 years before buying a new bike with Dura Ace. I can't agree with those who say that the only difference is weight. Dura Ace shifts more quickly, smoothly, and solidly. Ultegra performs well, never had any issues, but Dura Ace is noticeably better, especially during climbs. I've never combined comps from different groups, so I can't speak to whether or not a rear derailleur will be better without a Dura Ace shifter, but I suppose it is possible. You should do what I did...and go to Ui2....AMAZING!
#19
Senior Member
Join Date: Aug 2009
Posts: 8,550
Bikes: Wilier Izoard XP (Record);Cinelli Xperience (Force);Specialized Allez (Rival);Bianchi Via Nirone 7 (Centaur); Colnago AC-R Disc;Colnago V1r Limited Edition;De Rosa King 3 Limited(Force 22);DeRosa Merak(Red):Pinarello Dogma 65.1 Hydro(Di2)
Liked 278 Times
in
146 Posts
I rode Ultegra for about 5 years before buying a new bike with Dura Ace. I can't agree with those who say that the only difference is weight. Dura Ace shifts more quickly, smoothly, and solidly. Ultegra performs well, never had any issues, but Dura Ace is noticeably better, especially during climbs. I've never combined comps from different groups, so I can't speak to whether or not a rear derailleur will be better without a Dura Ace shifter, but I suppose it is possible. You should do what I did...and go to Ui2....AMAZING!
#20
▒▒▒▒▒▒
Join Date: Jan 2004
Location: New York
Posts: 476
Likes: 0
Liked 0 Times
in
0 Posts
As a person who just went to a DA rear mech from a Tiagra mech, there is a big difference. Compared to my Ultegra mech, there is a slight but noticeable difference. It runs more quietly and shifts slightly more smoothly. I suspect it will last much longer too, thanks in big part to the ceramic bearings. The fit and finish on each bit of a DA part is superb, and it operates with noticeably less effort in the shifter. However, mechanically it is practically identical to anything 105 or better as long as it's configured correctly. Whether it's worth the $$ is up to your wallet.
#21
Administrator
Join Date: Feb 2005
Location: Delaware shore
Posts: 13,575
Bikes: Cervelo C5, Guru Photon, Waterford, Specialized CX
Liked 2,351 Times
in
1,563 Posts
7900 should be cheaper now with 9000 on the way. Ask your LBS what the price is and compare online. If you get a good price, I would do it
#22
Mr. Sparkle
Join Date: Feb 2009
Location: Sugar Land, TX
Posts: 534
Bikes: 08 Specialized Allez Elite
Likes: 0
Liked 5 Times
in
3 Posts
I'm with the others, learn to tune your derailleur yourself and there's no difference between Ultegra and Dura-Ace performance wise.
#23
Peloton Shelter Dog
Correct.
Unless you go all the way to Di2, then you're really wasting money, but Di2 is the shiznit. Ferraris are wasting money too, but the customers are all happy.
Unless you go all the way to Di2, then you're really wasting money, but Di2 is the shiznit. Ferraris are wasting money too, but the customers are all happy.
__________________
https://www.cotsiscad.com
https://www.cotsiscad.com
#24
Peloton Shelter Dog
Correcter. In fact I've had 7900 mechanical, Ultegra 6700 mechanical and Di2, among the mechanical groups Shimano offers, Ultegra shifts better. DA braking performance is marginally superior.
__________________
https://www.cotsiscad.com
https://www.cotsiscad.com
#25
well hello there
Join Date: May 2005
Location: Point Loma, CA
Posts: 15,434
Bikes: Bill Holland (Road-Ti), Fuji Roubaix Pro (back-up), Bike Friday (folder), Co-Motion (tandem) & Trek 750 (hybrid)
Liked 343 Times
in
211 Posts
A few years ago, I was regularly riding DA, Ultegra and 105. DA was superior, with crisper, cleaner shifts. But I'm pretty sure an average cyclist wouldn't notice the difference. I did. But I'm super finicky.
__________________
.
.
Two wheels good. Four wheels bad.
.
.
Two wheels good. Four wheels bad.