considering clipless
#26
The cromoly Speedplays are in the same price range as Shimano 105 SPD-SL pedals. Not that expensive at all. It's a myth that Speedplay pedals are more expensive than the other major brands. It is true that the cleats are more expensive.
#27
Member
Joined: Oct 2012
Posts: 29
Likes: 0
#28
Senior Member
Joined: Aug 2012
Posts: 508
Likes: 0
From: Kleinburg, ON
Speedplay for clipless. Then buy the platform adapters for when riding in rush our or your 2 mile commute.
https://www.competitivecyclist.com/pr...6330.31.1.html
https://www.competitivecyclist.com/pr...6330.31.1.html
#31
Junior Member
Joined: Oct 2010
Posts: 14
Likes: 0
As others have suggested; go with MTB pedals that are two sided(Time ATAC, Shimano SPD, Look Quartz), or, which I will say again; Eggbeaters!!
Because they're made primarily for a MTBs, they allow the rider to unclip as fast as possible in case of an emergency.
For example:
--When you have trouble going over roots and you don't have enough forward momentum and begin to loose your balance and start to fall and you QUICKLY unclip to keep yourself from hitting the roots with your arms and shoulders.--
That was me this morning on the trails.
With that said, I don't recommend 'Speedplays' for first time users. They are a good pedal, but they are a road pedal. Even though they have a good float, they're purpose is to hold on to you and be one with the bike. They're for long distance riding when you don't have to unclip so often, or when you want to put the hammer down. When you fall down with those, you'll still be clipped in when you're on the ground. Now, try unclipping when you're on the ground.
And finally. DO NOT BUY SINGLE SIDED PEDALS. Not for what you need them for, at least. It's better if you graduate onto those.
Because they're made primarily for a MTBs, they allow the rider to unclip as fast as possible in case of an emergency.
For example:
--When you have trouble going over roots and you don't have enough forward momentum and begin to loose your balance and start to fall and you QUICKLY unclip to keep yourself from hitting the roots with your arms and shoulders.--
That was me this morning on the trails.
With that said, I don't recommend 'Speedplays' for first time users. They are a good pedal, but they are a road pedal. Even though they have a good float, they're purpose is to hold on to you and be one with the bike. They're for long distance riding when you don't have to unclip so often, or when you want to put the hammer down. When you fall down with those, you'll still be clipped in when you're on the ground. Now, try unclipping when you're on the ground.
And finally. DO NOT BUY SINGLE SIDED PEDALS. Not for what you need them for, at least. It's better if you graduate onto those.
#32
Speedplay for clipless. Then buy the platform adapters for when riding in rush our or your 2 mile commute.
https://www.competitivecyclist.com/pr...6330.31.1.html
https://www.competitivecyclist.com/pr...6330.31.1.html
Don't take my initial response as being "anti-clip" because I haven't used platform pedals since about 1992.
You may wish to consider two bikes - one for commuting and one for riding long rides. Alternately, you may wish to consider two sets of pedals (they're pretty easy to switch) or something like those platform adapters above. I've used a couple different pedal systems and for *me* the speedplays are best. I have knee issues and don't like cleats that strap your foot in tightly (even the so-called "float" of the yellow SPD-SL cleats gives me trouble). I also find that speedplays are very, very easy to clip in and out of and I have not fallen as a result of failure to unclip since I started using speedplay. 15 years now. Note, I rode regular cleats for about 7 years before I started using speedplay and I did have a few wipeouts with them. I also had a rather spectacular slow mo tip over with sneakers and toe-clips when I was younger, so nothing is fool proof.
One caveat about speedplay cleats - they're metal and feel "slippery" on asphalt when you put your foot down. Traction can be an issue on some surfaces, and they are pretty unpleasant to walk around in. I got a set of keeponcovers which addressed that for me. That's one of the appeals of the various mountain cleat systems. The cleat is recessed in the shoe so you don't have traction problems when you put your foot down. Plastic cleats like the shimano variety also seem to be less problematic in that regard, but they do wear out more quickly.
#33
Senior Member
Joined: Aug 2012
Posts: 508
Likes: 0
From: Kleinburg, ON
One caveat about speedplay cleats - they're metal and feel "slippery" on asphalt when you put your foot down. Traction can be an issue on some surfaces, and they are pretty unpleasant to walk around in. I got a set of keeponcovers which addressed that for me. That's one of the appeals of the various mountain cleat systems. The cleat is recessed in the shoe so you don't have traction problems when you put your foot down. Plastic cleats like the shimano variety also seem to be less problematic in that regard, but they do wear out more quickly.
https://www.competitivecyclist.com/za....ID=3825&MODE=
#34
Senior Member
Joined: Sep 2012
Posts: 134
Likes: 0
From: New York City
Bikes: 2012 CAAD10
I use SPDs for NYC traffic, and don't have any problems -- or at least I haven't been run over by a bus yet. Three thoughts:
1. You don't always have to be clipped in just because you have clipless. The pedals will still spin just fine. I wouldn't do it for long distances, because it's annoying, but you can ride in bike shoes on clipless pedals without being in the clips. That means that if you've got a stretch where you'd rather not be tied in to the bike...unclip for a while.
2. For short distances, SPDs work fine with regular shoes. It's not entirely comfortable, and anything more than 2 or 3 miles I wouldn't do it. But over that distance it's not going to bother you too much.
3. If you go with SPDs, get the multi-directional clips (so that your foot will pop out regardless of which way you twist it), and set the tension all the way down. You don't need it tight for city riding, and if you ever start to fall you'll probably find yourself popping right out.
1. You don't always have to be clipped in just because you have clipless. The pedals will still spin just fine. I wouldn't do it for long distances, because it's annoying, but you can ride in bike shoes on clipless pedals without being in the clips. That means that if you've got a stretch where you'd rather not be tied in to the bike...unclip for a while.
2. For short distances, SPDs work fine with regular shoes. It's not entirely comfortable, and anything more than 2 or 3 miles I wouldn't do it. But over that distance it's not going to bother you too much.
3. If you go with SPDs, get the multi-directional clips (so that your foot will pop out regardless of which way you twist it), and set the tension all the way down. You don't need it tight for city riding, and if you ever start to fall you'll probably find yourself popping right out.
#35
While at the lbs today I had a chance to try some spd pedal/cleats just for a few clip/unclips while straddling a bike. they didn't seem to hard to unclip but it would take some getting used to.
#36
Look into Speedplay Frogs. I used them for years as a car-free commuter. They are great, clip in super easy, unclip without thought or hesitation, and are very tolerant of grime/low maintenance. If you decide to go that route, PM me. I have an extra set of pedals and cleats. They will not be a liability in heavy traffic.
#37
JT- thanks for the offer. I might take you up on it if they fit my criteria. Since I don't know if I will even like a clip less system it would make sense to get cheaper used ones over full price new.
#38
__________________
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
#39
Member
Joined: Apr 2012
Posts: 33
Likes: 0
From: Seattle
Bikes: 2000 Schwinn HomeGrown Tomato MTB, 2008 Specialized Roubaix Expert
speedplay lite actions are what I ride (road)
dual sided entry makes it easier to clip in.
Ive never had an issue clipping out.
speedplay makes a clip-on platform for when you want to ride in sneakers
https://www.speedplay.com/index.cfm?f...me.merchandise
with all that said, I think mountain systems may be a little easier for a first timer
I have time atacs on my mtb, very wide clip, dual sided, clears mud efficiently.

dual sided entry makes it easier to clip in.
Ive never had an issue clipping out.
speedplay makes a clip-on platform for when you want to ride in sneakers
https://www.speedplay.com/index.cfm?f...me.merchandise
with all that said, I think mountain systems may be a little easier for a first timer
I have time atacs on my mtb, very wide clip, dual sided, clears mud efficiently.
OP - you might also check out Speedplay Frogs if you are considering MTB pedals. They have plenty of float, and they are very easy to get in and out of.
#40
Senior Member
Joined: Jan 2008
Posts: 1,415
Likes: 0
From: San Diego, CA
Bikes: 2010 Litespeed Icon, 1987 Nishiki Olympic 12
+1 I also use the keep on covers
https://www.ebay.com/itm/KEEP-ON-CLEA...item3ccd8fd8df
https://www.ebay.com/itm/KEEP-ON-CLEA...item3ccd8fd8df
Might have to get a set of these in the near future. Especially since my Coffee Caps are starting to wear out.
#41
Still can't climb
Joined: Sep 2006
Posts: 23,024
Likes: 6
From: Limey in Taiwan
i wish there were recessed spd-sl.
__________________
coasting, few quotes are worthy of him, and of those, even fewer printable in a family forum......quote 3alarmer
No @coasting, you should stay 100% as you are right now, don't change a thing....quote Heathpack
coasting, few quotes are worthy of him, and of those, even fewer printable in a family forum......quote 3alarmer
No @coasting, you should stay 100% as you are right now, don't change a thing....quote Heathpack
#42
Don't know about your particular ones, but the Time ATACs I had in about 2000 had no float and really bothered my knees.
OP - you might also check out Speedplay Frogs if you are considering MTB pedals. They have plenty of float, and they are very easy to get in and out of.
OP - you might also check out Speedplay Frogs if you are considering MTB pedals. They have plenty of float, and they are very easy to get in and out of.
I ordered a pair of these to use with cleats:
https://www.amazon.com/gp/aw/d/B0043S...p_s_a_1&sr=8-1
#43
+1 I also use the keep on covers
https://www.ebay.com/itm/KEEP-ON-CLEA...item3ccd8fd8df
https://www.ebay.com/itm/KEEP-ON-CLEA...item3ccd8fd8df
Maybe shipping evens it out.https://www.keeponkovers.com/Product.html
#44
Don't know about your particular ones, but the Time ATACs I had in about 2000 had no float and really bothered my knees.
OP - you might also check out Speedplay Frogs if you are considering MTB pedals. They have plenty of float, and they are very easy to get in and out of.
OP - you might also check out Speedplay Frogs if you are considering MTB pedals. They have plenty of float, and they are very easy to get in and out of.
The never seemed to bug my knees. Very easy in and out.
__________________
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
Thread
Thread Starter
Forum
Replies
Last Post
Larsenex
General Cycling Discussion
30
01-31-19 03:08 PM
linnefaulk
General Cycling Discussion
17
08-14-14 10:54 PM
cervelo4me
Southern California
15
05-30-11 08:48 AM








