Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Switching from clipless to platforms

Search
Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Switching from clipless to platforms

Thread Tools
 
Search this Thread
 
Old 02-02-14 | 12:41 AM
  #1  
Thread Starter
Senior Member
 
Joined: Feb 2012
Posts: 95
Likes: 0
Switching from clipless to platforms

I've been riding my 2012 caad10 with speedplay clipless pedals since I bought her. I have been mostly commuting in northern NJ and am going to switch from clipless to platform pedals. I've already ordered some basic pedals (MKS Sylvan touring to be in fact).

I want to know to those of you who tried or rode for a while in clipless then switched to platforms, what major differences did you notice, if any? I'm in NYC often and I would have to say that more than 50% of cyclists use platforms. I've enjoyed the speedplays but don't think it's necessary for commuting purposes...your thoughts?
ChuBikes is offline  
Reply
Old 02-02-14 | 12:48 AM
  #2  
pdedes's Avatar
ka maté ka maté ka ora
 
Joined: Oct 2008
Posts: 4,423
Likes: 4
From: wessex

Bikes: breezer venturi - red novo bosberg - red, pedal force cg1 - red, neuvation f-100 - da, devinci phantom - xt, miele piste - miche/campy, bianchi reparto corse sbx, concorde squadra tsx - da, miele team issue sl - ultegra

You're probably right.
pdedes is offline  
Reply
Old 02-02-14 | 01:02 AM
  #3  
Still can't climb
 
Joined: Sep 2006
Posts: 23,024
Likes: 6
From: Limey in Taiwan
Originally Posted by ChuBikes
I've been riding my 2012 caad10 with speedplay clipless pedals since I bought her. I have been mostly commuting in northern NJ and am going to switch from clipless to platform pedals. I've already ordered some basic pedals (MKS Sylvan touring to be in fact).

I want to know to those of you who tried or rode for a while in clipless then switched to platforms, what major differences did you notice, if any? I'm in NYC often and I would have to say that more than 50% of cyclists use platforms. I've enjoyed the speedplays but don't think it's necessary for commuting purposes...your thoughts?
i think you are making the right decision. i found clipless pain in the ass and of no benefit when i was exclusively riding in town on the mups. If you intend to ride where you need to climb, platforms are awful compared to clipless. i did one climb on platforms at first then on clipless and the difference was like night and day.

i went clipless to platform to clipless.
__________________
coasting, few quotes are worthy of him, and of those, even fewer printable in a family forum......quote 3alarmer

No @coasting, you should stay 100% as you are right now, don't change a thing....quote Heathpack
coasting is offline  
Reply
Old 02-02-14 | 01:23 AM
  #4  
Huffandstuff's Avatar
Senior Member
 
Joined: Feb 2013
Posts: 1,776
Likes: 2
I rode exclusively SPD for a couple months then went back to platforms and almost crashed a couple of times(Foot kept pulling out when at 6/12 o'clock) but that's on a fixed gear, road riding shouldn't be too much of a hassle.
Huffandstuff is offline  
Reply
Old 02-02-14 | 02:11 AM
  #5  
dralways's Avatar
Senior Member
 
Joined: Dec 2011
Posts: 499
Likes: 0
If you never have to climb, platform all the way for a commute.. its just so much safer and convenient when you have to detatch your foot from the pedal. I prefer clipping in while commuting just because of all the hills around me though, they're endless here and like mentioned already, night and day between clipless and platform while climbing.

Ive got some pretty nice platforms if you want to trade? I went clipless and don't plan on going platform again unless I get another bike (if even) and I've wanted to try out speedplays on a budget for a long time.





Very grippy and stylish on a road bike, about as good as platform gets as far I'm concerned.
dralways is offline  
Reply
Old 02-02-14 | 02:24 AM
  #6  
commu*ist spy
 
Joined: Aug 2012
Posts: 4,462
Likes: 5
From: oregon
I've been pretty much training exclusively on my platforms. I have hotspot issues with pretty much any shoe that's not a specialized bg wide, with just the right amount of arch support and wedges. While I have a pair of SPD SL's, I find platforms to be very convenient. Just make sure you have a toe clip or something to hold your foot in the same position.

Also, I've been looking at some stainless steel insoles to put into my tennis shoes that'll improve the stiffness. I'll probably have to rig something up with that insole to have some sort of arch support though..
spectastic is offline  
Reply
Old 02-02-14 | 07:09 AM
  #7  
Senior Member
 
Joined: Aug 2012
Posts: 508
Likes: 0
From: Kleinburg, ON
Originally Posted by ChuBikes
I've been riding my 2012 caad10 with speedplay clipless pedals since I bought her. I have been mostly commuting in northern NJ and am going to switch from clipless to platform pedals. I've already ordered some basic pedals (MKS Sylvan touring to be in fact).

I want to know to those of you who tried or rode for a while in clipless then switched to platforms, what major differences did you notice, if any? I'm in NYC often and I would have to say that more than 50% of cyclists use platforms. I've enjoyed the speedplays but don't think it's necessary for commuting purposes...your thoughts?

Why hey not just get the speedplay platform adaptor. That way you can ride clipless in times that you want.
R1lee is offline  
Reply
Old 02-02-14 | 08:48 AM
  #8  
Paul Barnard's Avatar
For The Fun of It
15 Anniversary
 
Joined: May 2007
Posts: 6,131
Likes: 2,002
From: Louisissippi Coast

Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet

I go back and forth between my commuter bike with platforms and my road race bike with clipless. I love the platforms and haven't had any issues whatsoever. Two summers ago I rode Independence Pass with the platforms and thought they were fantastic. I really don't feel like clipless offers me any advantages at all.
Paul Barnard is offline  
Reply
Old 02-02-14 | 08:58 AM
  #9  
Bacciagalupe's Avatar
Professional Fuss-Budget
 
Joined: Aug 2005
Posts: 6,494
Likes: 26
For commuting, IMO platforms are better. Basically, no need to change shoes when you get to work.

The Ergon PC2's look ridiculous, but work well. Very big, grippy platform.
Bacciagalupe is offline  
Reply
Old 02-02-14 | 08:36 PM
  #10  
1nterceptor's Avatar
LET'S ROLL
 
Joined: Nov 2009
Posts: 4,789
Likes: 59
From: NEW YORK, NY - USA

Bikes: 2014 BMC Gran Fondo, 2013 Brompton S6L-X

I'm also commuting in northern NJ to NYC and also using Speedplay(X/2) on my roadbike.
Lately I've been commuting on my folder though since it has fenders for the winter slop.
I can't stand the platform pedals on my Brompton and will be switching to Crankbothers
Eggbeaters 3 clipless pedals soon.

https://www.youtube.com/watch?v=b-rQN...6zPoymgKaIoDLA

Originally Posted by ChuBikes
I've been riding my 2012 caad10 with speedplay clipless pedals since I bought her. I have been mostly commuting in northern NJ and am going to switch from clipless to platform pedals. I've already ordered some basic pedals (MKS Sylvan touring to be in fact).

I want to know to those of you who tried or rode for a while in clipless then switched to platforms, what major differences did you notice, if any? I'm in NYC often and I would have to say that more than 50% of cyclists use platforms. I've enjoyed the speedplays but don't think it's necessary for commuting purposes...your thoughts?
1nterceptor is offline  
Reply
Old 02-02-14 | 08:47 PM
  #11  
celticfrost's Avatar
Raising the Abyss
 
Joined: Jan 2005
Posts: 3,822
Likes: 9
From: TTing on the MUP

Bikes: Expensive ones that I ride slowly

I have a 45 mile round trip work commute (re-commencing in Spring). I might go from Look Keo to SPD, but I'd think platform would be torture on my feet.
__________________
"...in Las Vegas where -the electric bills are staggering -the decor hog wild -and the entertainment saccharine -what a golden age -what a time of right and reason -the consumer's king -and unhappiness is treason..."
celticfrost is offline  
Reply
Old 02-02-14 | 09:19 PM
  #12  
Senior Member
 
Joined: Jun 2013
Posts: 974
Likes: 0

Bikes: One with square wheels



I do see that you bought pedals, but if you still go out on rides that you'll want to clip in and don't want to swap pedals all the time the adapters may be an option as well. (this is assuming you are not keeping it outside where they can be stolen).
Team Sarcasm is offline  
Reply
Old 02-02-14 | 09:22 PM
  #13  
Senior Member
 
Joined: Jun 2007
Posts: 6,411
Likes: 13
From: Haunchyville
I am mainly a clipless user (spd-sl), but keep Power Grips on my utility bike. I like them quite a bit.
canam73 is offline  
Reply
Old 02-02-14 | 09:26 PM
  #14  
LesterOfPuppets's Avatar
The space coyote lied.
15 Anniversary
Community Builder
Community Influencer
 
Joined: Sep 2008
Posts: 48,714
Likes: 10,973
From: dusk 'til dawn.

Bikes: everywhere

Are you running Sylvans with clips n straps?

I switch from BMX platforms to SPDs to Suntour Cyclone with clips (old road pedals kinda like Sylvans but smaller and no teeth) all the time and don't notice too much difference.

Vans on the BMX platforms hold plenty well, good enough for climbing IMO.

The hardest part is remembering that I have to do REAL bunnyhops when on the platforms

LesterOfPuppets is offline  
Reply
Old 02-02-14 | 11:22 PM
  #15  
catonec's Avatar
Senior Member
 
Joined: Apr 2009
Posts: 2,470
Likes: 2
From: Buffalo New York
Originally Posted by R1lee
Why hey not just get the speedplay platform adaptor. That way you can ride clipless in times that you want.
+1
__________________
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
catonec is offline  
Reply
Old 02-03-14 | 08:40 AM
  #16  
merlinextraligh's Avatar
pan y agua
20 Anniversary
 
Joined: Aug 2005
Posts: 31,810
Likes: 1,232
From: Jacksonville

Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike

Switching from clipless to platforms

Paging Alanbikehouston
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
merlinextraligh is offline  
Reply
Old 02-03-14 | 08:55 AM
  #17  
Thread Starter
Senior Member
 
Joined: Feb 2012
Posts: 95
Likes: 0
Originally Posted by dralways
Ive got some pretty nice platforms if you want to trade?

They look nice but I've already received my MKS Sylvan. The roads I take on my commute only has two main hills each way, other than that it's mainly flat.
ChuBikes is offline  
Reply
Old 02-03-14 | 08:58 AM
  #18  
Thread Starter
Senior Member
 
Joined: Feb 2012
Posts: 95
Likes: 0
Originally Posted by spectastic
Also, I've been looking at some stainless steel insoles to put into my tennis shoes that'll improve the stiffness.
Do you highly suggest I ride with tennis shoes on a platform or will any shoe do the job? I play tennis and have plenty of tennis shoes...
I know we want to go stiff as possible, but I also have some hiking shoes if that's the case.
ChuBikes is offline  
Reply
Old 02-03-14 | 09:00 AM
  #19  
Thread Starter
Senior Member
 
Joined: Feb 2012
Posts: 95
Likes: 0
Originally Posted by R1lee
Why hey not just get the speedplay platform adaptor. That way you can ride clipless in times that you want.
Thanks for this option, after looking at pictures, these adapters do not seem to have much grip and would hate to start slipping. Also, they look rather narrow...?
ChuBikes is offline  
Reply
Old 02-03-14 | 09:02 AM
  #20  
Senior Member
 
Joined: Aug 2012
Posts: 508
Likes: 0
From: Kleinburg, ON
Originally Posted by ChuBikes
Thanks for this option, after looking at pictures, these adapters do not seem to have much grip and would hate to start slipping. Also, they look rather narrow...?
I can't comment on how slippery they are, but i have no issues using them.
R1lee is offline  
Reply
Old 02-03-14 | 09:02 AM
  #21  
Thread Starter
Senior Member
 
Joined: Feb 2012
Posts: 95
Likes: 0
Originally Posted by LesterOfPuppets
Are you running Sylvans with clips n straps?
I'm not running them with clips/straps, just open platform.
ChuBikes is offline  
Reply
Old 02-03-14 | 10:00 AM
  #22  
FrenchFit's Avatar
The Left Coast, USA
 
Joined: Feb 2008
Posts: 3,757
Likes: 25

Bikes: Bulls, Bianchi, Koga, Trek, Miyata

Went 100% back to platforms, then returned to clipless on two fast bikes, one Tri. My commuters are platforms, powergrips on one and fixie straps on the other. Tennis shoes are great, at less the ones without the built up sole and heel. Mine have a pretty stiff sole. But I switch shoes I'm riding to work, which was part of the reason to ditch clipless.

Though I anticipated muscle memory problems riding bikes with straps, then going clipless, then back again - never happened.
FrenchFit is offline  
Reply
Old 02-03-14 | 10:15 AM
  #23  
BillyD's Avatar
Administrator
20 Anniversary
Community Builder
Community Influencer
 
Joined: Apr 2005
Posts: 34,326
Likes: 8,480
From: Hudson Valley, NY

Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92

Clipless makes sense on roads outside of the city where you can really hammer, or in the big parks like Central and Prospect. Clipless does NOT make sense when riding on the city streets. How hard can you hammer before hitting a traffic signal and losing all the advantage you may have gained? And then there's the annoyance of unclipping and reclipping at every traffic signal. Clipless just takes all the fun out of riding in the city.

Ridiculous! When I ride in the city I ride my platforms and enjoy the hell out of the experience.
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
BillyD is offline  
Reply
Old 02-07-14 | 11:52 AM
  #24  
smahler's Avatar
Senior Member
 
Joined: Jul 2013
Posts: 65
Likes: 0
From: Maryland

Bikes: Specialized Allez & Sirrus

Originally Posted by ChuBikes
I've been riding my 2012 caad10 with speedplay clipless pedals since I bought her. I have been mostly commuting in northern NJ and am going to switch from clipless to platform pedals. I've already ordered some basic pedals (MKS Sylvan touring to be in fact).

I want to know to those of you who tried or rode for a while in clipless then switched to platforms, what major differences did you notice, if any? I'm in NYC often and I would have to say that more than 50% of cyclists use platforms. I've enjoyed the speedplays but don't think it's necessary for commuting purposes...your thoughts?
You might want to try Power Grip pedals: https://www.jensonusa.com/!GAOwqCjgge...FTHNOgodsUEA5A They're like a platform pedal, but might give you a little more speed (if you're looking for that). I went to these before I switched to clipless. Very easy to use - just slip your foot out when you stop(shouldn't have a problem if you're used to clipless). I have them on my commuter now.
smahler is offline  
Reply
Old 02-07-14 | 12:02 PM
  #25  
10 Wheels's Avatar
Galveston County Texas
 
Joined: Nov 2007
Posts: 33,335
Likes: 1,285
From: In The Wind

Bikes: 02 GTO, 2011 Magnum

These work great for my riding.

https://store.velo-orange.com/index.p...alf-clips.html
__________________
Fred "The Real Fred"

10 Wheels is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.