Murray Missile's March Madness
#26
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
Thanks but @Deal4Fuji has me covered, my crank and chainwheels will clean up but the bearings and cones were in BAD, BAD shape.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
#27
minimalist cyclist
Join Date: Mar 2014
Location: North Carolina
Posts: 1,751
Bikes: yes please
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1123 Post(s)
Liked 1,651 Times
in
949 Posts
As I suspected the cheap paint loosened right up with just PB Blaster.
Likes For Deal4Fuji:
#28
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
You might be getting the cranks too if I cant get the inside cone off The outside cone and retainer ring came off with no problem as did the large ring and pie plate but that inside cone has been a bugger, plus I wasn't positive it wasnt reverse threaded. Law 3speedslow to the rescue with a Schwinn service manual. I'll try this and hopefully get it out tomorrow or Wednesday. I'm adding the deraileurs since it sounds like they might be unique per Velo Mule
As I suspected the cheap paint loosened right up with just PB Blaster.
As I suspected the cheap paint loosened right up with just PB Blaster.
We had another cold snap so shop time has been limited. Right now I have 5 bikes going at the same and all waiting on parts so it's been a game of "musical bikes" in the shop LOL. I need the weather to stabilize and stay above freezing so I can hook my garden hose back up and get some parts cleaning done.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#29
minimalist cyclist
Join Date: Mar 2014
Location: North Carolina
Posts: 1,751
Bikes: yes please
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1123 Post(s)
Liked 1,651 Times
in
949 Posts
Success !! Don't have a bench vice or a cheater bar but I've got a homemade bike rack and daughters who used to play fastpitch softball. Cutting the cap off the end of an old aluminum bat fit the large grip of the wrench where a piece of cast iron pipe probably wouldn't have. With the added leverage and knowing for sure which way to turn the stationary cone came loose nicely.
Likes For Deal4Fuji:
#30
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
Success !! Don't have a bench vice or a cheater bar but I've got a homemade bike rack and daughters who used to play fastpitch softball. Cutting the cap off the end of an old aluminum bat fit the large grip of the wrench where a piece of cast iron pipe probably wouldn't have. With the added leverage and knowing for sure which way to turn the stationary cone came loose nicely.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
Likes For Deal4Fuji:
#32
Paramount Fan
Join Date: Dec 2006
Location: Vermont
Posts: 293
Bikes: Paramounts, Raleigh Pros, Colnago, DeRosa, Gios, Masis, Pinarello, R. Sachs, Look, D. Moulton, Witcomb, Motobecane, Bianchis, Fat City, Frejus, Follis, Waterford, Litespeed, d'Autremont, others, mostly '70s-'80s
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 123 Post(s)
Liked 243 Times
in
133 Posts
I didn't take before pics, but there were two of these headed to recycling at the co-op before I recognized their low mileage and snagged them. I took them home and refurbed them there. I sold the 1979 green 22" for a hundred bucks to a guy who had just had his bike stolen and wanted something that no thief would want. I recently finished the 1980 red 20", which is a tad nicer, and I'm hoping to get $150 for it--thus far, no takers. It's chump change considering the time invested, but all the cash is going to the co-op, so it seems like a worthy attempt to keep a bike that is like brand new from becoming a rear door on a Toyota. The most A-R success of the refurbs was the polishing and rehaping of the chainstay protectors to return them from yellowed, stretched globs to their almost invisible, taut original form, as can barely be discerned in the photos.
Likes For sbarner:
#33
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
I didn't take before pics, but there were two of these headed to recycling at the co-op before I recognized their low mileage and snagged them. I took them home and refurbed them there. I sold the 1979 green 22" for a hundred bucks to a guy who had just had his bike stolen and wanted something that no thief would want. I recently finished the 1980 red 20", which is a tad nicer, and I'm hoping to get $150 for it--thus far, no takers. It's chump change considering the time invested, but all the cash is going to the co-op, so it seems like a worthy attempt to keep a bike that is like brand new from becoming a rear door on a Toyota. The most A-R success of the refurbs was the polishing and rehaping of the chainstay protectors to return them from yellowed, stretched globs to their almost invisible, taut original form, as can barely be discerned in the photos.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#34
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,823
Bikes: '79 Trek 938, '86 Jim Merz Allez SE, '90 Miyata 1000, '68 PX-10, '80 PXN-10, '73 Super Course, '87 Guerciotti, '83 Trek 600, '80 Huffy Le Grande
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 1268 Post(s)
Liked 3,650 Times
in
1,459 Posts
We had another cold snap so shop time has been limited. Right now I have 5 bikes going at the same and all waiting on parts so it's been a game of "musical bikes" in the shop LOL. I need the weather to stabilize and stay above freezing so I can hook my garden hose back up and get some parts cleaning done.
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
Likes For AdventureManCO:
#35
Paramount Fan
Join Date: Dec 2006
Location: Vermont
Posts: 293
Bikes: Paramounts, Raleigh Pros, Colnago, DeRosa, Gios, Masis, Pinarello, R. Sachs, Look, D. Moulton, Witcomb, Motobecane, Bianchis, Fat City, Frejus, Follis, Waterford, Litespeed, d'Autremont, others, mostly '70s-'80s
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 123 Post(s)
Liked 243 Times
in
133 Posts
Nice. Sadly around here Varsities don't sell, too many nice ones survived out of the millions they sold. Everybody had one and almost everyone still does. They were indestructible! Two things will survive all out nuclear war, cockroaches and Schwinn Varsities LOL. That's partly why I've kept my yellow '74 and why "Dave" will be super cheap if not out right free.
Likes For sbarner:
#36
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
Yeah, Big Bird tips the scales on the high side of 45 Lbs. Great for getting back in shape after being out of the saddle too long though.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#37
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,779
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 113 Post(s)
Tagged: 0 Thread(s)
Quoted: 948 Post(s)
Liked 3,032 Times
in
997 Posts
Originally Posted by Murray Missile
Everybody had one and almost everyone still does. They were indestructible! Two things will survive all out nuclear war, cockroaches and Schwinn Varsities LOL.
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
Likes For ascherer:
#38
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
Bottom bracket pieces are here, many thanks again @Deal4Fuji! Paint cleanup hasn't gone as planned, evidently all those years in the weather has softened the paint and even light rubbing with the #0000 steel wool and WD-40 removes the blue topcoat. I've used this on much older bikes and toys and got pretty agressive with no paint loss but not so with Dave so I'll be switching methods on that part of the rehab. He's going to be a bit more rustic looking than intended and he was already going to be quite rustic. Probably more along the lines of "urban camouflage" than beausage......
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
#39
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,146
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4538 Post(s)
Liked 6,454 Times
in
3,712 Posts
Success !! Don't have a bench vice or a cheater bar but I've got a homemade bike rack and daughters who used to play fastpitch softball. Cutting the cap off the end of an old aluminum bat fit the large grip of the wrench where a piece of cast iron pipe probably wouldn't have. With the added leverage and knowing for sure which way to turn the stationary cone came loose nicely.
I have a long piece of thinwall that I flattened one end, I may have to upgrade to a batter up version.
Likes For merziac:
#40
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
Dave has not been abandoned, just been trying to knock out some low hanging fruit. Hoping to get some cleaning done on it this weekend.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
#41
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
Got a lot done today, crankset disassembled, crank and chainwheels cleaned and clearcoated to delay rusting again and small parts soaking in vinegar overnight. Frame and fork cleaned of the heavy rust and clearcoated but still LOTS of patina, the old paint soaked up the clearcoat like a sponge and that gave it just about the finish I was shooting for. Still undecided on wheels, since the goal is for it to be "invisible" to thieves but reliable transportation I want to use bolt on wheels, problem is the only serviceable set I have are the chrome wheels on Big Bird and it uses the axles to mount the fenders. I do still have the originals off Big Bird though. I wonder, since the rust pin holes are on the surface between the spokes and not on the braking surfaces if I could patch them with some aluminum tape under the rim liners on the inside and a thin coat of JB Weld in the holes? Or maybe just the tape on the inside and skip the JB Weld.The holes are from a chemical being splashed on them, not from a rust out, so they're still plenty strong and that would certainly be in keeping with the theme of the bike LOL.
I am shocked at how easily everything has come apart, I figured as rusty as it was everything would be a major battle to remove but it has been quite the opposite. It's going to look a hundred times better than when I started but it will still look like a refugee from the smelter..... oh wait, it is.
I am shocked at how easily everything has come apart, I figured as rusty as it was everything would be a major battle to remove but it has been quite the opposite. It's going to look a hundred times better than when I started but it will still look like a refugee from the smelter..... oh wait, it is.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Last edited by Murray Missile; 04-13-24 at 07:24 PM.
#42
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,171
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 861 Post(s)
Liked 313 Times
in
145 Posts
A great project. I played around with a Suburban for a few years. The precious owner had modified it intro a single speed with a bottom bracket adapter and aluminum wheels, and I picked it up for $25. I put some useful gearing on it. It was fun to ride around with despite its weight; the one thing that I would have liked to fix was the fork. Those pressed fork blades felt disturbingly flexy.
I added a rear brake after I took this photo.
I added a rear brake after I took this photo.
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
Last edited by Aubergine; 04-13-24 at 04:51 PM.
Likes For Aubergine:
#43
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
Had a pretty decent day in the garage, Dave is staring to look like a bicycle again. Headset rebuilt; fork back in; brake calipers disassembled, cleaned, reassembled and mounted with new shoes; crankset back together and installed with replacement BB compliments of Deal4Fuji ; derailleurs mounted; shifters back on and deraileur cables and housing run. I'm using a Shimano FD I pulled off an 80's Varsity and a Suntour Honor RD that I have no memory of obtaining but it was in the stash. The original steel bars were severely bent in at the end on one side so I used the stem from the same 80's Varsity and a set of only slighty bent aluminum bars from the Volkscycle my Arabesque group came off of. Still have to clean up a set of brake levers, I'm using a set of Schwinn Approved Dia Compes with turkey levers. I also found a set of steel bolt on 27 inch wheels less rusty than Big Birds originals (no pin holes to fill LOL) in the back of the garage and they not only had a usable set of gumwall tires on them but they still had air in them! They had to have been back there a good 10 years or better. The gumwalls look a bit "funky" but they aren't discolored, dried out or cracked and the tread looks fair to middlin' with no signs of cracking.
I'll clean up those wheels and then knock away at what's left. If all goes to plan Dave will be a functioning bicycle by next weekend.
I'll clean up those wheels and then knock away at what's left. If all goes to plan Dave will be a functioning bicycle by next weekend.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
#44
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
It's been awhile but Dave is progressing, Wheels are done but I ended up putting new tires on them, while cleaning them I noticed the tread was separating on the old tires and I didn't have any good used ones that I wanted to part with. I had a pair of cheap tires I had bought during the pandemic for a bike that has "left the building" so I put them on Dave's wheels. I also swapped the 5 speed road freewheel for a 5 speed from an old MTB with much larger cogs to gear him down for improved climbing. For those that have never had the "pleasure" Varsities are NOT fun to climb with. I picked up a vintage Schwinn Approved saddle for $5 and put it on today. I also found an old set of Dia Compe levers with blue hoods and the hoods have have cutouts for turkey levers. Oh yes, I am putting turkey levers on him. He's also getting purple bar tape. Why purple? Because I bought some for another bike but it wasn't the shade of purple it showed in the ad and clashed really badly. However, it actually looks decent (sort of) against the blue on Dave and I will almost certainly never have another chance to use it up LOL. I was tempted to take a pic of him on the stand and post it but I'm going to wait until he's done. I have to clean up the brake levers and hang them on the bars, wrap the bars, run brake cables, put a chain on and set the brakes and derailleurs. He'll still look like the South end of a North bound horse but that's about a 1000% inprovement over how he looked when I pulled him out of the dirt.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
#45
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
Ladies and gentlemen, meet the reincarnated "Dave"........
The before just for a reminder.
And as of about an hour ago............
The before just for a reminder.
And as of about an hour ago............
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#46
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,779
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 113 Post(s)
Tagged: 0 Thread(s)
Quoted: 948 Post(s)
Liked 3,032 Times
in
997 Posts
Originally Posted by Murray Missile
For those that have never had the "pleasure" Varsities are NOT fun to climb with.
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
Likes For ascherer:
#47
Full Member
Join Date: Jul 2023
Location: Idaho, USA
Posts: 236
Bikes: Aluminum and Steel
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 119 Post(s)
Liked 422 Times
in
154 Posts
Looks amazing! It’s a good thing I was only 15, skinny and stupid when I started riding in earnest. I didn’t know any better or realize how challenging climbing on my Varsity was, I just knew I could. What moved me to get a better bike was descending! Watching those blade forks vibrate at high speeds convinced me I needed to upgrade.
__________________
“Ride like the wind boy! Ride like the wind…”
-The Voice inside my head, circa 1982
“Ride like the wind boy! Ride like the wind…”
-The Voice inside my head, circa 1982
Likes For IdahoBrett:
#48
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,276
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 644 Post(s)
Liked 1,345 Times
in
629 Posts
Well, couldn't sell the nice bike I had for sale but Dave just sold along with his big brother "Big Bird".
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
#49
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,127
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 816 Post(s)
Liked 1,037 Times
in
674 Posts
A great project. I played around with a Suburban for a few years. The precious owner had modified it intro a single speed with a bottom bracket adapter and aluminum wheels, and I picked it up for $25. I put some useful gearing on it. It was fun to ride around with despite its weight; the one thing that I would have liked to fix was the fork. Those pressed fork blades felt disturbingly flexy.
I added a rear brake after I took this photo.
I added a rear brake after I took this photo.
My preference is for Suburban and Continentals because of the better and lighter tubular forks. I have a Varsity now that, if I use start working on it, I will put a tubular fork on from another bike. Like I need more working bikes. Or even another electro-forged Schwinn bike. But I do like them, now, in my older and I don't care what people think, years.
#50
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,171
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 861 Post(s)
Liked 313 Times
in
145 Posts
I though that the Suburban, like the Continental always had tubular forks. I could be wrong, perhaps there was a year or two were they used the Varsity forks. This bike has a matching fork, and the proper looking Suburban stem and handlebars, so it could be that they were made with flat forged fork blades for some time. Good looking bike, it looks like a great rider. I like that it already came with the crank adapter already.
My preference is for Suburban and Continentals because of the better and lighter tubular forks. I have a Varsity now that, if I use start working on it, I will put a tubular fork on from another bike. Like I need more working bikes. Or even another electro-forged Schwinn bike. But I do like them, now, in my older and I don't care what people think, years.
My preference is for Suburban and Continentals because of the better and lighter tubular forks. I have a Varsity now that, if I use start working on it, I will put a tubular fork on from another bike. Like I need more working bikes. Or even another electro-forged Schwinn bike. But I do like them, now, in my older and I don't care what people think, years.
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
Likes For Aubergine: